후광view BT-M7 Wireless Monitor for BT7 User Manual

1. 제품 오버view

헤일로view BT-M7 is a wireless monitor designed to provide enhanced visibility for your vehicle or trailer. It features a 7-inch display and supports 1080P video recording. This monitor is specifically designed for use with BT7 series cameras.

Figure 1: Haloview BT-M7 Wireless Monitor unit.

주요 특징:

• 1080P Video Recording Resolution: Seamless recording events with 1080P@30fps FHD Resolution Lens.
• 7인치 디스플레이: Clear and bright screen for optimal view주고받음.
• 무선 연결 : Provides a stable wireless connection to compatible cameras.
• 중요 호환성 참고 사항: This monitor is NOT compatible with 720P wireless cameras.

2. 설정

2.1 Monitor Placement and Power

1. 위치를 선택하세요: Place the BT-M7 monitor on your dashboard or another suitable flat surface within your vehicle's cabin. Ensure it does not obstruct your view 도로의.
2. 전원 연결: Connect the monitor to your vehicle's 12V cigarette lighter socket using the provided power adapter. The adapter typically includes an on/off button for convenience.
3. Optional Direct Wiring: For a more permanent installation, the system includes a wiring harness that allows direct integration into your vehicle's electrical system. Consult a professional for direct wiring installation if you are unsure.

2.2 카메라 설치

헤일로view BT-M7 system supports multiple cameras for comprehensive coverage. Installation methods may vary slightly depending on the camera type (rear or side marker).

1. 후방 카메라: Mount the rear camera securely on the back of your trailer or RV. For longer vehicles, an antenna extender may be necessary to ensure a strong signal to the monitor.
2. Side Marker Cameras: These cameras are designed to replace existing side marker lights on your vehicle or trailer. Ensure proper wiring to integrate them with your vehicle's lighting system.

2.3 Pairing Cameras with the Monitor

To establish a wireless connection between your cameras and the BT-M7 monitor:

1. Power on the monitor and the camera(s) you wish to pair.
2. 모니터에서 다음을 누르세요. 메뉴 버튼을 눌러 메인 메뉴에 액세스합니다.
3. 로 이동합니다 편성 option using the arrow buttons and press OK.
4. While the monitor is in pairing mode, press the pairing button on the camera's wireless repeater unit (usually located near the camera or its antenna). This typically needs to be done within a 20-second window.
5. Once successfully paired, the camera's video feed will appear on the monitor. Repeat for additional cameras.

3. 사용 설명서

3.1 카메라 전환 Views

To cycle through the connected camera view를 누릅니다. 셀 (Select) button on the monitor. Each press will switch to the next active camera feed or a multi-view display if configured.

3.2 Parking Lines

The monitor can display adjustable parking lines for assistance with backing up. These lines can be turned on, off, or adjusted for specific camera views via the monitor's menu settings.

3.3 비디오 녹화

The BT-M7 monitor supports video recording. Insert a compatible SD card into the designated slot on the monitor to enable recording functionality. Recorded footage can be played back directly on the monitor.

3.4 오디오 모니터링

Some cameras may transmit audio. The monitor features a volume control in its menu settings, allowing you to listen to audio from the active camera feed.

4. 유지관리

Regular maintenance ensures optimal performance and longevity of your Haloview BT-M7 system.

• 청소: Periodically clean the monitor screen and camera lenses with a soft, damp 천을 사용하세요. 표면에 흠집이 생길 수 있는 연마성 세제는 사용하지 마세요.
• 연결 확인: Regularly inspect all power and antenna connections for tightness and signs of wear or corrosion.
• 소프트웨어 업데이트: Check the Haloview 공식적인 website for any available firmware updates for your monitor and cameras.

5. 문제 해결

If you encounter issues with your BT-M7 monitor, try the following steps:

• 신호 없음:
  • Ensure all cameras and the monitor are powered on.
  • Verify that the cameras are correctly paired with the monitor (refer to Section 2.3).
  • 보안을 위해 모든 케이블 연결을 확인하세요.
  • Ensure no large metal objects are obstructing the wireless signal path between the camera and monitor.
• 이미지 품질이 좋지 않음:
  • 카메라 렌즈와 모니터 화면을 청소하세요.
  • Check for any physical damage to the camera or its lens.
  • Ensure the camera is within the effective range of the monitor.
• 모니터 전원이 켜지지 않음:
  • Check the power connection to the cigarette lighter socket or direct wiring.
  • 차량의 전원 콘센트가 정상적으로 작동하는지 확인하십시오.

6. 사양

7. 보증 및 지원

For detailed warranty information, technical support, and service inquiries, please refer to the official Haloview web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.