1. 서론
The MOOER Steep I is a high-quality audio interface designed for musicians, producers, and home recording enthusiasts. It offers support for high-resolution audio up to 24-bit/192 kHz, ensuring clear and detailed sound capture. This manual provides essential information for setting up, operating, and maintaining your Steep I audio interface.
Image 1.1: MOOER Steep I Audio Interface in a typical recording environment.
2. 안전 정보
기기를 사용하기 전에 다음 안전 예방 조치를 읽고 이해하시기 바랍니다.
- 본 제품을 비, 습기 또는 극한의 온도에 노출시키지 마십시오.
- 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
- Use only the specified power supply or USB connection for power.
- 장치를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- MOOER Steep I Audio Interface
- USB-C to USB-A 케이블
- 사용 설명서 (본 문서)
4. 제품 오버view
Familiarize yourself with the various controls and connections on your Steep I audio interface.
4.1 전면 패널 컨트롤
이미지 4.1: 상단 view of the Steep I, highlighting control knobs and buttons.
- 입력 게인 노브(1 및 2): Adjust the input level for channels 1 and 2.
- 48V 버튼: Activates +48V phantom power for condenser microphones on input 2.
- S.DRCT (Direct Monitor) Button: Engages direct monitoring, allowing you to hear your input signal directly without latency.
- Main Out Knob: 스튜디오 모니터의 전체 출력 볼륨을 제어합니다.
- 믹스 노브: Blends the direct input signal with the playback signal from your computer during direct monitoring.
- LED Input Level Indicators: Provide visual feedback on input signal levels for both channels.
- 전원 LED: 장치의 전원 상태를 나타냅니다.
4.2 측면 패널 연결
이미지 4.2: 측면 view of the Steep I, showing input and headphone connections.
- PHONES (Headphone Output): 헤드폰 연결용 1/4" TRS 스테레오 잭.
- VOLUME (Headphone Volume): Rotary knob to adjust headphone output level.
- 1 INST/LINE: 1/4" TRS mono jack for connecting instruments (guitars, basses) or line-level devices.
- 2 MIC/LINE/INST: XLR/TRS combo jack for connecting microphones (XLR) or instruments/line-level devices (1/4" TRS).
4.3 후면 패널 연결
이미지 4.3: 후면 view of the Steep I, showing USB and main output connections.
- POWER (USB-C): Dedicated USB-C port for power supply.
- USB 2.0 (USB-C): USB-C port for data transfer to your computer. Can also supply power when connected to a PC.
- MAIN OUT (L & R): Two 1/4" TRS mono jacks for connecting to studio monitors or other playback systems.
5. 설정
5.1 시스템 요구 사항
The MOOER Steep I is compatible with Windows 10 and above. It also works with Mac computers (Mini, Macbook Air) and various DAWs like ProTools, Logic Pro, and Garageband.
5.2 컴퓨터에 연결하기
- Connect the provided USB-C to USB-A cable from the USB 2.0 port on the Steep I to an available USB port on your computer.
- If your computer cannot provide sufficient power, connect an external USB power adapter (not included) to the 힘 USB-C port on the Steep I.
- The Power LED on the front panel will illuminate when the device is powered on.
5.3 드라이버 설치
For Windows users, it is recommended to download and install the latest ASIO drivers from the official MOOER website for optimal performance and low latency. Mac users typically do not require additional driver installation as the device is class-compliant.
5.4 입력 연결
- Channel 1 (INST/LINE): Connect your guitar, bass, or other line-level instrument using a 1/4" TS/TRS cable.
- Channel 2 (MIC/LINE/INST): Connect a microphone using an XLR cable, or an instrument/line-level device using a 1/4" TS/TRS cable.
5.5 출력 연결
- 주요 출력 : 스튜디오 모니터를 연결하세요 MAIN OUT L 그리고 R 1/4" TRS jacks using appropriate cables.
- 헤드폰: 헤드폰을 다음에 연결합니다. 전화 1/4" TRS jack.
6. 운영
6.1 전원 켜기/끄기
The Steep I powers on automatically when connected to a computer via USB or when an external power supply is connected to the POWER port. There is no dedicated power switch.
6.2 입력 게인 조정
회전하다 Input Gain Knobs (1 & 2) clockwise to increase the input level for your connected microphone or instrument. Observe the LED input level indicators to ensure your signal is strong but not clipping (peaking into the red).
6.3 48V 팬텀 전원 활성화
If you are using a condenser microphone with the MIC/LINE/INST (Channel 2) input, press the 48V button to supply +48V phantom power. Ensure your microphone requires phantom power before activating this feature. Dynamic microphones do not require phantom power.
6.4 직접 모니터링
를 누르세요 S.DRCT button to enable direct monitoring. This allows you to hear your input signal directly through your headphones or main outputs with zero latency, which is crucial for recording. Use the 혼합 knob to balance the direct input signal with the playback from your computer (e.g., backing tracks).
6.5 헤드폰 모니터링
Adjust the headphone listening level using the 용량 knob located next to the PHONES jack.
6.6 주요 출력 레벨
Control the overall playback volume to your studio monitors using the 메인 아웃 손잡이.
6.7 Software Integration (DAWs)
Once connected and drivers are installed (if necessary), select the MOOER Steep I as your audio input and output device within your Digital Audio Workstation (DAW) software (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband). Refer to your DAW's manual for specific instructions on audio device selection.
비디오 6.1: 오버view of the MOOER Audio Interface, demonstrating its features and use cases.
Video 6.2: Official demonstration of the STEEP I & II Audio Interfaces, showcasing their capabilities.
7. 유지관리
7.1 청소
To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Ensure the unit is disconnected from power before cleaning.
7.2 보관
When not in use for extended periods, store the Steep I in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent dust and damage.
8. 문제 해결
If you encounter issues with your MOOER Steep I, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No sound from inputs | Incorrect gain setting, 48V not activated (for condenser mics), incorrect input selected in DAW, faulty cable. | Adjust input gain. Activate 48V if using a condenser mic. Verify input selection in your DAW. Check cables. |
| No sound from outputs (monitors/headphones) | Main Out/Headphone Volume too low, incorrect output selected in DAW, faulty cables, monitors/headphones not powered. | Increase Main Out/Headphone Volume. Verify output selection in your DAW. Check cables and ensure monitors/headphones are powered and connected correctly. |
| 왜곡되거나 잡음이 섞인 오디오 | Input gain too high (clipping), driver issues, ground loop. | Reduce input gain until LED indicators do not peak into red. Reinstall drivers. Try connecting to a different USB port or power outlet. |
| 컴퓨터에서 장치를 인식하지 못했습니다 | Driver not installed (Windows), faulty USB cable, insufficient power, incorrect USB port. | Install/reinstall drivers. Try a different USB-C cable. Ensure sufficient power is supplied (use dedicated POWER port if needed). Try a different USB port on your computer. |
9. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 무어 |
| 모델 | 가파른 I |
| 연결 기술 | USB-C |
| 채널 수 | 2 |
| 최대 Samp르 레이트 | 24비트/192kHz |
| 호환 장치 | Microphone, Headphone, Personal Computer |
| 지원 소프트웨어 | Popular DAWs (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband) |
| 운영 체제 | Windows 10 이상, macOS |
| 오디오 입력 | XLR/TRS Combo (Channel 2), 1/4" TRS (Channel 1) |
| 오디오 출력 | 1/4" TRS Main Out (L/R), 1/4" TRS Headphone Out |
| 품목 무게 | 0.66 킬로그램 |
10. 보증 및 지원
10.1 보증 정보
MOOER products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official MOOER web자세한 보증 약관은 해당 사이트에서 확인하세요.
10.2 기술 지원
For technical assistance, driver downloads, or further inquiries, please visit the official MOOER website or contact MOOER customer support through the contact information provided on their website. Ensure you have your product model (Steep I) and serial number ready when contacting support.