AQESO U80BH

AQESO U80BH Upper Arm Blood Pressure Monitor Instruction Manual

Model: U80BH

1. 안전 정보

This blood pressure monitor is intended for home use. Always consult with a healthcare provider to interpret your readings. Do not self-diagnose or treat medical conditions based solely on the measurements from this device.

  • 금기사항: This product cannot be used in patients with severe heart insufficiency to avoid suffocation and death. It is not suitable for infants and children.
  • 중요 참고 사항:
    • Measurements should be taken in a quiet state.
    • Ensure correct posture for accurate readings (sit straight, feet flat on floor, arm supported at heart level).
    • Avoid eating, smoking, exercising, or drinking caffeinated beverages for at least 30 minutes before measurement.
    • 전기 제품을 분류되지 않은 도시 폐기물로 폐기하지 마십시오. 분리 수거 시설을 사용하십시오.
    • Do not use batteries and the AC adapter at the same time.
    • The device is not rechargeable. When using the USB cable, it must be connected to a power source.
    • Only use the USB Type-C cable provided in the package.

2. 제품 구성품

The AQESO U80BH Blood Pressure Monitor kit includes the following items:

  • 1 x AQESO U80BH Blood Pressure Monitor
  • 1 x Medium/Large Cuff (9"-17" arm circumference)
  • 1 x Extra Large Cuff (13"-21" arm circumference)
  • 1 x Drawstring Bag
  • AAA 배터리 4개
  • 1 x USB 유형 C 충전 케이블
  • 1 x 사용자 설명서
Contents of AQESO Blood Pressure Monitor kit
Image: All components included in the AQESO U80BH Blood Pressure Monitor package, showing the monitor, two cuffs, carrying bag, batteries, USB cable, and user manual.

This image displays the complete kit: the main blood pressure monitor unit, two different sized cuffs (Medium/Large and Extra Large), a drawstring storage bag, four AAA batteries, a USB Type-C charging cable, and the user manual. All items are neatly arranged on a surface.

3. 설정

3.1. 장치 전원 공급

The AQESO U80BH monitor supports two power options:

  • AAA 배터리: Insert the 4 provided AAA batteries into the battery compartment located on the back of the device.
  • USB Type-C 케이블: Connect the provided USB Type-C cable to the monitor's port and to a 5V 1A USB power adapter (not included). Note: The device is not rechargeable and must remain connected to a power source when using the USB cable.
AQESO Blood Pressure Monitor Power Options
Image: Illustration of the two power options for the AQESO Blood Pressure Monitor: 4 AAA batteries or a USB Type-C cable connection.

This image visually explains the two ways to power the device. On the left, it shows the battery compartment with four AAA batteries inserted. On the right, it illustrates connecting the USB Type-C cable to the monitor and a power source (adapter not included).

3.2. 날짜 및 시간 설정

Accurate date and time settings are crucial for tracking your measurements over time.

  1. 기계가 꺼져 있는지 확인하십시오.
  2. 를 누르세요 세트 button to enter setting mode. The year will start flashing.
  3. 를 누르세요 멤 button repeatedly to adjust the year.
  4. 누르다 세트 to confirm the year and move to month setting.
  5. Repeat steps 3 and 4 to adjust the month, day, hour, and minute.
  6. 분을 설정한 후 누르세요 세트 확인합니다.
  7. 를 누르세요 시작/중지 설정을 저장하고 종료하려면 버튼을 클릭하세요.
Video: How to set up date and time on the AQESO Blood Pressure Monitor.

This video demonstrates the step-by-step process of setting the date and time on the blood pressure monitor. It shows pressing the SET button to cycle through year, month, day, hour, and minute, and using the MEM button to adjust values, then START/STOP to save.

3.3. Selecting User Mode

The monitor supports two users, each with independent measurement records (up to 99 measurements per user).

  1. 기계가 꺼져 있는지 확인하십시오.
  2. 를 누르세요 세트 button. The screen will display a user icon (User 1 or User 2).
  3. 를 누르세요 멤 사용자 1과 사용자 2 사이를 전환하는 버튼입니다.
  4. 누르다 세트 선택한 사용자를 확인합니다.
  5. 를 누르세요 시작/중지 button to save the setting and exit.
Video: How to switch between User 1 and User 2 on the AQESO Blood Pressure Monitor.

This video illustrates how to switch between the two user profiles on the blood pressure monitor. It shows pressing the SET button to enter user selection, then using the MEM button to toggle between User 1 and User 2, and finally pressing START/STOP to confirm the selection.

4. 사용 설명서

4.1. Choosing the Correct Cuff Size

Using the correct cuff size is essential for accurate readings. Measure your upper arm circumference at the midpoint between your elbow and shoulder.

Cuff Size Guide
팔둘레커프 사이즈
9" - 17" (22-43 cm)중형/대형
13" - 21" (33-53 cm)특대
AQESO Blood Pressure Monitor with two cuff sizes
Image: The AQESO Blood Pressure Monitor shown with both the Medium/Large and Extra Large cuffs.

This image displays the main blood pressure monitor unit alongside both the Medium/Large and Extra Large cuffs, highlighting the flexibility for different arm sizes.

Importance of correct cuff size for blood pressure measurement
Image: Visual guide explaining how incorrect cuff size can lead to inaccurate blood pressure readings.

This graphic illustrates why proper cuff sizing is critical. It shows that a cuff that is too small can result in falsely high readings, while a cuff that is too large can lead to falsely low readings. It also depicts arms of medium/standard, large, and extra-large sizes, indicating the appropriate cuff for each.

4.2. 커프 적용

  1. Connect the cuff's air tube securely to the air socket on the side of the monitor.
  2. Sit comfortably with your back straight and supported, feet flat on the floor, and legs uncrossed.
  3. Place your arm on a flat surface, palm facing up, ensuring your arm is at heart level.
  4. Slide the correct size cuff onto your bare upper left arm, approximately 1-2 cm above the elbow joint. The air tube should run down the center of your arm.
  5. Ensure the cuff is snug but not too tight (you should be able to insert two fingers between the cuff and your arm).
Proper posture and cuff placement for blood pressure measurement
Image: Diagram illustrating the correct posture and cuff placement for accurate blood pressure readings.

This image provides a visual guide on how to correctly position yourself and the cuff for a blood pressure measurement. It shows a person sitting upright with their back supported, feet flat on the floor, and the arm resting on a table at heart level, with the cuff properly placed on the upper arm.

4.3. 측정하기

  1. 커프를 올바르게 착용하고 적절한 자세를 취한 후, 버튼을 누르십시오. 시작/중지 단추.
  2. The cuff will automatically inflate and then slowly deflate.
  3. Your systolic, diastolic, and pulse rate will be displayed on the large backlit LCD screen.
  4. The monitor will automatically store the reading under the selected user profile.
  5. The color indicator light on the monitor will show your blood pressure category (Green for Normal, Yellow for High-Normal, Red for Serious Pressure).
AQESO Blood Pressure Monitor in use, showing large backlit LCD
Image: The AQESO Blood Pressure Monitor displaying a measurement on its large backlit LCD screen, with a finger pressing the START/STOP button.

This image shows the blood pressure monitor in operation, with a hand pressing the START/STOP button. The large, backlit LCD screen clearly displays the systolic and diastolic readings, along with the pulse rate. The green indicator light is also visible, signifying a normal blood pressure reading.

4.4. 다시view저장된 측정값 확인

다시view previous measurements for the currently selected user:

  1. 기계가 꺼져 있는지 확인하십시오.
  2. 를 누르세요 멤 버튼을 누르세요. 가장 최근 측정값이 표시됩니다.
  3. 누르다 멤 again to cycle through older readings.
  4. To exit memory mode, press the 시작/중지 button or wait for the device to automatically turn off.

5. 유지관리

  • 청소: 모니터와 커프는 부드럽고 마른 천으로 닦으십시오. 연마성 세척제를 사용하거나 기기를 물에 담그지 마십시오.
  • 저장: Store the device in the provided drawstring bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • 배터리 교체: Replace all four AAA batteries when the low battery indicator appears on the screen. If the device will not be used for an extended period (e.g., 3 months or more), remove the batteries to prevent leakage.
  • 커프 관리: Ensure the cuff is not twisted or kinked during storage. Avoid sharp objects that could puncture the cuff.

6. 문제 해결

If you encounter issues with your AQESO U80BH Blood Pressure Monitor, refer to the table below for common solutions:

일반적인 문제 및 솔루션
문제가능한 원인해결책
부정확한 판독Incorrect cuff size or placement, improper posture, movement during measurement.Ensure correct cuff size, proper cuff placement (1-2 cm above elbow, tube centered), maintain correct posture, and remain still during measurement. Avoid talking.
장치 전원이 켜지지 않음Dead batteries, incorrect battery insertion, loose USB cable connection.Replace batteries with new ones, ensure batteries are inserted with correct polarity, check USB cable connection, or try a different power source.
Cuff does not inflate/deflate properlyAir tube not securely connected, air leakage from cuff, damaged cuff.Check that the air tube is firmly connected to the monitor. Inspect the cuff for any damage or leaks. If damaged, replace the cuff.
디스플레이의 오류 메시지Various operational errors.Refer to the detailed error code section in the full user manual for specific instructions. Generally, restart the measurement after ensuring proper setup.

7. 사양

  • 모델: U80BH
  • 상표: 아케소
  • 측정 방법: 오실로 메트릭
  • 측정 범위:
    • 압력: 0-299mmHg
    • 맥박수: 40~199회/분
  • 정확성:
    • 압력 : ± 3 mmHg
    • 펄스: 판독값의 ±5%
  • 커프 사이즈:
    • Medium/Large: 9"-17" (22-43 cm)
    • Extra Large: 13"-21" (33-53 cm)
  • 메모리: 사용자 2명, 사용자당 측정 횟수 99회
  • 전원: 4 x AAA batteries or USB Type-C (5V 1A adapter not included)
  • 표시하다: 대형 백라이트 LCD
  • 치수: 5.1인치 길이 x 4.1인치 너비 x 2인치 두께
  • 제조업체: Shenzhen Urion Technology Co., Ltd. AQESO
  • GTIN/UPC: 792105342573

8. 보증 및 지원

For warranty information, product support, or service inquiries, please refer to the contact details provided in the full user manual or visit the official AQESO web대지.

반품 정책: This product typically has a 30-day return/replacement policy. Please check with your retailer for specific details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.