HIFONICS ZD-1750.5D

Hifonics ZD-1750.5D 5-Channel Class-D Car Audio Amp리파이어 사용 설명서

Brand: HIFONICS | Model: ZD-1750.5D

소개

The Hifonics ZD-1750.5D Zeus Delta 1,750-Watt 5-Channel Amplifier is designed to enhance your car audio experience. This amplifier features nickel-plated, high-temperature, impact-proof terminals for secure and reliable connections. Its dedicated 5-channel configuration delivers precise performance, suitable for a comprehensive audio setup. An on-board electronic crossover allows for tailored frequency adjustments for speakers and subwoofers. The aluminum heat sink ensures superior heat dissipation, while the molded connection terminal simplifies power, ground, and speaker connections with angled access for clean wire management. LED system protection provides visual feedback for overload and speaker short protection. The DC SIGNAL SENSE feature enables automatic amplifier activation upon detecting a signal on the RCA inputs, eliminating the need for a remote turn-on wire.

Hifonics ZD-1750.5D 5-Channel Amp리퍼

전반적인 view of the Hifonics ZD-1750.5D 5-Channel Class-D Car Audio Amp리퍼.

주요 특징:

  • 자동차 오디오 amplifier with cutting-edge features and modern design, nickel-plated and impact-proof terminals for secure connections.
  • 5-channel operation modes for impactful bass response or specialized audio applications, ensuring a purposeful sonic experience.
  • PWM MOSFET coil power supply for stable power and minimal heat generation, with an aluminum heat sink for superior heat dissipation.
  • Secure molded connection terminal with angled RCA inputs for easy power, ground, and speaker connections, facilitating clean wire management.
  • LED system circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the ampliifier 엔드 패널.

설정 및 설치

Proper installation is crucial for optimal performance and safety. Ensure the vehicle's battery is disconnected before beginning installation. Mount the amplifier in a location that allows for adequate ventilation and is protected from moisture and excessive vibration. The aluminum heat sink requires airflow to function effectively.

배선 연결:

  1. 전원 연결(+12V): Connect a heavy-gauge power cable (recommended 0-gauge) from the amplifier's +12V terminal to the positive terminal of the vehicle's battery. An external fuse holder with a 280 Amp fuse should be installed within 18 inches of the battery.
  2. 접지 연결(GND): Connect a heavy-gauge ground cable (recommended 0-gauge) from the amp리파이어의 GND 단자를 차량 섀시의 깨끗하고 도색되지 않은 금속 표면에 연결하십시오. 견고하고 저항이 낮은 연결을 유지하십시오.
  3. 원격 켜기(REM): 헤드 유닛의 원격 출력에서 ​​원격 켜기 와이어를 연결하세요. amplifier's REM terminal. Alternatively, the amplifier features a DC SIGNAL SENSE function that can activate the amplifier automatically when an audio signal is detected on the RCA inputs, eliminating the need for a remote wire.
  4. 스피커 연결: 스피커를 연결하십시오 amplifier's speaker output terminals. Observe correct polarity (+ to + and - to -) for each channel. For bridged operation, refer to the markings on the amp증폭기의 단자 블록.
  5. RCA 입력 연결: 헤드 유닛의 RCA 출력을 다음에 연결하세요. amplifier의 RCA 입력 잭. amplifier supports 2-channel, 4-channel, or 5-channel input modes, selectable via the input mode switch.
하이포닉스 ZD-1750.5D Amp앰프 전원 및 스피커 연결

상세한 view of the power, ground, remote, and speaker output terminals on the Hifonics ZD-1750.5D amp리퍼.

하이포닉스 ZD-1750.5D AmpLifier 치수

Dimensions of the Hifonics ZD-1750.5D amp설치 계획을 위한 lifier.

Operating Controls and Adjustments

ZD-1750.5D amplifier offers various controls to fine-tune your audio system for optimal sound quality.

하이포닉스 ZD-1750.5D Ampliifier 컨트롤 패널

Control panel of the Hifonics ZD-1750.5D amplifier, showing crossover, level, and input mode settings.

  • 입력 모드 전환: Select between 2-channel, 4-channel, or 5-channel input modes depending on your head unit's output configuration.
  • Gain/Level Control: 입력 감도를 조정합니다. amp출력 볼륨과 일치하도록 lifiertag헤드 유닛의 게인을 최소로 설정하고 왜곡 없이 원하는 볼륨이 나올 때까지 천천히 높이십시오.
  • 하이패스 필터(HPF): Controls the frequency range for the high-pass filter, allowing frequencies above the set point to pass through to your speakers. Useful for protecting smaller speakers from low bass frequencies.
  • 저역 통과 필터(LPF): Controls the frequency range for the low-pass filter, allowing frequencies below the set point to pass through, typically used for subwoofers.
  • 대역 통과 필터(BPF): Some channels may offer a band-pass filter, allowing a specific range of frequencies to pass through.
  • Bass EQ/Boost: Provides an adjustable bass boost at a specific frequency to enhance low-end response. Use sparingly to avoid distortion.
  • 아음속 필터: Filters out extremely low frequencies that are inaudible and can cause damage to subwoofers.
  • 위상 제어 : Adjusts the phase of the subwoofer output relative to the main speakers, helping to achieve better bass integration.

그만큼 amplifier features LED indicators for Power, Clip (for front and rear channels), and Protect. These indicators provide real-time status of the amplifier's operation and protection circuits.

유지

To ensure the longevity and optimal performance of your Hifonics ZD-1750.5D amplifier의 경우 다음 유지 관리 지침을 따르세요.

  • 깨끗하게 유지하십시오: 정기적으로 청소 amp부드럽고 마른 천으로 청소기 외부를 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
  • 환기를 보장하십시오: 정기적으로 다음 사항을 확인하십시오. amplifier's heat sink fins are free from dust and debris to maintain proper heat dissipation. Ensure the mounting location allows for adequate airflow.
  • 연결 확인: Annually inspect all power, ground, remote, and speaker connections for tightness and corrosion. Loose or corroded connections can lead to poor performance or damage.
  • 과열을 피하세요: Do not block the ventilation openings. If the amplifier frequently enters protection mode due to overheating, reassess its mounting location and ensure sufficient airflow.

문제 해결

If you encounter issues with your Hifonics ZD-1750.5D amplifier의 경우, 다음의 일반적인 문제와 해결책을 참조하세요.

문제가능한 원인해결책
전원 없음 / Amplifier가 켜지지 않습니다
  • Blown fuse (external)
  • 전원 또는 접지 연결이 느슨함
  • 원격 켜기 신호 없음
  • DC SIGNAL SENSE not detecting input
  • Check and replace external fuse (280 Amp 권장).
  • 모든 전원 및 접지 연결이 안전한지 확인하세요.
  • 리모트 와이어가 연결되어 있고 헤드 유닛에서 +12V 전원이 공급되고 있는지 확인하십시오.
  • If using DC SIGNAL SENSE, ensure RCA inputs have an active audio signal.
소리가 출력되지 않음
  • RCA 또는 스피커 연결부가 헐거워져 있습니다.
  • 잘못된 게인 설정
  • 헤드 유닛 출력 문제
  • 모든 RCA 케이블과 스피커선 연결 상태를 확인하십시오.
  • Adjust gain settings appropriately.
  • Verify head unit is powered on and outputting audio.
왜곡된 소리
  • 게인이 너무 높게 설정됨(클리핑)
  • 잘못된 크로스오버 설정
  • 스피커 임피던스 불일치
  • Reduce gain until the clip indicator LED is off.
  • Adjust HPF/LPF settings to match speakers/subwoofers.
  • 스피커 임피던스가 허용 범위 내에 있는지 확인하십시오. amplifier's rated range.
Amplifier Overheating (Protect LED On)
  • 환기가 부족합니다
  • 스피커 임피던스가 너무 낮음
  • 장시간 대량 생산 작업
  • 주변에 적절한 공기 흐름을 확보하세요. amp리퍼.
  • Check speaker impedance; ensure it meets specifications.
  • 볼륨을 줄이거나 허용하세요 amp식히다.

명세서

Below are the key specifications for the Hifonics ZD-1750.5D 5-Channel Class-D Car Audio Amp정수기:

특징세부 사항
모델 번호ZD-1750.5D
상표하이포닉스
채널5채널
Ampliifier 클래스D 급
최대 전력 출력1750와트
전원 공급 장치PWM MOSFET
터미널Nickel-plated, high-temperature, impact-proof
방열판Aluminum for superior heat dissipation
크로스오버On-board electronic crossover (HPF, LPF, BPF)
시스템 보호LED indicators for overload and speaker short protection
자동 켜기DC SIGNAL SENSE feature

공식 제품 영상

Watch the official Hifonics Brutus Gamma Amplifiers video for an overview of features and design principles. While this video showcases the Brutus Gamma series, many of the core technologies and design philosophies apply to the Zeus Delta series, including the ZD-1750.5D.

공식 영상 쇼asing Hifonics Brutus Gamma Amplifiers, highlighting design and audio features relevant to the ZD-1750.5D.

보증 및 지원

The Hifonics ZD-1750.5D amplifier is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or warranty claims, please contact Hifonics customer service through their official web사이트 또는 제품 포장에 제공된 연락처 정보를 참조하세요.

© 2026 Hifonics. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.