UEi DL579-600A Dual Display TRMS-Clamp 미터 사용 설명서

제품 끝view

The UEi DL579 is a CAT III 600 V rated True RMS AC Clamp Meter designed for comprehensive electrical testing. It features a dual display for simultaneous readings and measures AC/DC voltag예: 교류 전류, 저항, 정전 용량 및 온도.

This versatile tool is ideal for checking system boards, live wires, and performing various electrical measurements in professional settings.

주요 특징:

• CAT III 600 V rating for enhanced safety.
• Measures AC Volts up to 750 VAC.
• Measures DC Volts up to 1000 VDC.
• Measures AC current up to 600A.
• Measures Resistance up to 60MΩ.
• Includes temperature measurement via K-Type thermocouples.
• Capacitance measurement capability.
• Dual display for simultaneous readings.
• Inrush current function for motor startup analysis.

구성 요소 및 제어

그림 1: 전면 view of the UEi DL579-600A Dual Display TRMS-Clamp Meter, showing the main display, rotary dial, and clamp 턱.

Figure 2: The DL579-600A meter alongside its accessories, including test leads, K-Type thermocouple, carrying pouch, and batteries.

Detailed Component Breakdown:

• A. 클amp: Used to measure inductive AC current. Opens to 1.25 inches (32.0mm).
• B. 도체 정렬 표시: Indicators for proper conductor placement within the clamp.
• C. Category Max Indicator: Displays the maximum CAT Rating for the clamp 턱.
• D. NCV Alert Light: Illuminates when Non-Contact Voltage (NCV) is detected.
• F.Clamp 지렛대: Used to open and close the current clamp 턱.
• G. 로터리 셀렉터 다이얼: Used to select the desired measurement function (e.g., Volts, Amps, Ohms, Temp).
• H. 범위 버튼: Press to set the manual range for measurements.
• I. 선택 버튼: Used to toggle between functions within a single rotary dial position (e.g., AC/DC).
• J. Category Max Indicator: Displays the maximum CAT Rating for the input jacks.
• K. Test Lead Input Jacks: Multifunction and Positive input jacks for connecting test leads.
• L. Wire Separation Tab/NCV Sensor: Used to isolate an individual wire from a bundle for testing. The NCV sensor detects live voltage.
• M. Test Lead Holder: 테스트 리드를 편리하게 보관할 수 있습니다.
• N. Hand Guide: Provides a point of reference for operator safety during use.
• O. Hold/Backlight Button: Press to hold the current reading on the display or activate the backlight.
• P. 최소/최대 버튼: Records minimum and maximum readings during a measurement session.
• Q. 디스플레이: Dual LCD display showing measurement values.
• R. 돌입/Hz 듀티 버튼: Activates Inrush current measurement or switches to Frequency/Duty Cycle mode.
• S. K형 온도 프로브 입력: Jacks for connecting the K-Type thermocouple for temperature measurements.
• T. 입력 잭 잠금: Secures the test leads in the input jacks.
• U. Built-in versatile magnet: Can be used as a mount or with an optional strap.
• V. 배터리 커버: 배터리 구획을 보호합니다.
• W. 배터리 구획 래치: 배터리 커버를 고정합니다.

그림 3: 클로즈업 view of the dual display, showing simultaneous readings for different parameters.

Figure 4: Detail of the test lead input jacks and the K-Type temperature probe input, with a probe connected.

그림 5: 후면 view showing the built-in versatile magnet, allowing for hands-free operation or attachment to metal surfaces.

Figure 6: Close-up of the battery compartment, secured by latches, for easy battery replacement.

설정 및 초기 사용

1. 배터리 설치: Open the battery cover (V) by releasing the latches (W). Insert the required batteries, ensuring correct polarity. Close the cover securely.
2. 전원 켜기: Rotate the Rotary Selector Dial (G) from the "OFF" position to any desired measurement function (e.g., V~ for AC Volts, A~ for AC Current). The display (Q) will illuminate.
3. 테스트 리드 연결: 권용tage, resistance, capacitance, or diode measurements, insert the test leads into the appropriate Test Lead Input Jacks (K). Ensure the leads are fully inserted and secured by the Input Jack Lock (T).
4. Connecting Temperature Probe: For temperature measurements, connect the K-Type thermocouple to the K-Type Temperature Probe Inputs (S).

작동 지침

Measuring AC Current (Clamp 기능):

1. Rotate the Rotary Selector Dial (G) to the "A~" position.
2. 클을 누르십시오amp Lever (F) to open the Clamp (에이).
3. Place the single conductor wire to be measured within the clamp jaw, ensuring it aligns with the Conductor Alignment Marks (B).
4. Cl을 풀어라amp Lever (F) to close the jaw around the conductor.
5. Read the AC current value on the Display (Q).

측정 볼륨tage (AC/DC):

1. Connect the test leads to the appropriate Test Lead Input Jacks (K).
2. Rotate the Rotary Selector Dial (G) to the "V~" (AC Volts) or "V-" (DC Volts) position. Use the SELECT button (I) to toggle if needed.
3. 전압이 발생하는 회로 지점에 테스트 프로브를 접촉하십시오.tage를 측정해야 합니다.
4. vol을 읽어보세요tage value on the Display (Q).

측정 온도 :

1. Connect the K-Type thermocouple to the K-Type Temperature Probe Inputs (S).
2. Rotate the Rotary Selector Dial (G) to the "Temp" position.
3. 측정하고자 하는 물체 위 또는 근처에 열전대 끝을 놓으십시오.
4. Read the temperature value on the Display (Q).

Using Hold/Backlight and Min/Max Functions:

• 잡고 있다: Press the Hold/Backlight Button (O) briefly to freeze the current reading on the display. Press again to release.
• 백라이트: Press and hold the Hold/Backlight Button (O) to activate the display backlight for low-light conditions. Press and hold again to turn off.
• 최소 최대: Press the Min/Max Button (P) to enter Min/Max recording mode. The meter will continuously record the minimum and maximum values. Press again to cycle through Min, Max, and current readings. Hold to exit.

유지

• 청소: Wipe the meter with a dry, clean cloth. Do not use abrasive cleaners or solvents.
• 배터리 교체: When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Refer to the "Setup and Initial Use" section for battery installation.
• 저장: Store the meter in its provided carrying pouch (Figure 2) in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• 구경 측정: For optimal accuracy, periodic calibration by a qualified service center is recommended.

문제 해결

명세서

보증 및 지원

The UEi DL579-600A Dual Display TRMS-Clamp 계량기는 다음과 같은 구성품을 포함합니다. 1년 보증 from the date of purchase. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in the included warranty documentation or visit the official UEi Test Instruments web대지.

추가 지원 및 리소스를 보려면 다음을 방문하세요. UEi Test Instruments Store on Amazon.