Generic 20mm Smartwatch Band User Manual

소개

This manual provides essential information for the proper installation, usage, and maintenance of your Generic 20mm Smartwatch Band. This band is designed to personalize your compatible smartwatch with a unique Skeleton Halloween Nightmare design, offering both style and comfort.

Image: The Skeleton Halloween Nightmare design smartwatch band.

호환 모델

This 20mm smartwatch band is compatible with a variety of smartwatches. Please ensure your device has a 20mm space between the watch lugs for proper fitment.

• Samsung Galaxy Watch5: 40mm, 44mm
• Samsung Galaxy Watch5 Pro: 45mm
• Samsung Galaxy Watch4: 40mm, 44mm, 42mm Classic, 46mm Classic
• Samsung Galaxy Watch3: 41mm
• Samsung Galaxy Watch Active2: 40mm, 44mm
• Samsung Galaxy Watch: 42mm
• Samsung Galaxy Watch Active: 40mm
• Samsung Gear Sport
• Samsung Gear S2, S2 Classic
• Huawei Watch 2
• Moto 360 and Gen 42mm
• Fossil Q Gazer
• Any other watch with 20mm space between watch lugs.

설정 및 설치

The smartwatch band features quick-release pins for easy installation without the need for additional tools. Follow these steps to attach or remove the band:

1. Determine Strap Size: Before installation, confirm your watch requires a 20mm strap. Measure the inner space between your watch's lugs.


Image: A watch face with a ruler measuring the inner space between the lugs, indicating a 20mm strap size.

2. Attach the Band: Locate the quick-release pin on the back of the band. Slide the lever on the pin inwards.
3. 정렬 및 삽입: While holding the lever, align one end of the pin with the corresponding lug hole on your watch.
4. Secure the Pin: Once one end is in, release the lever and gently push the band into place until the pin clicks securely into the other lug hole.


Image: A close-up diagram showing a quick-release spring bar with an arrow indicating to slide the lever to release or attach the strap.

5. 보안 확인: Gently pull on the band to ensure it is firmly attached to the watch.
6. Remove the Band: To remove, simply slide the quick-release lever inwards and detach the band from the watch lugs.

운영(사용)

Once installed, the smartwatch band is ready for daily use. The band is designed for comfort and durability, suitable for various activities. The stainless steel buckle ensures a secure fit on your wrist.

The band fits wrists ranging from 5.3 to 7.8 inches in circumference, accommodating most users.

유지

Proper care will extend the life and appearance of your smartwatch band. Follow these guidelines:

• Vegan Leather: Wipe the vegan leather surface with a damp 천으로 닦아내고 즉시 말리세요.
• 스테인리스 스틸: Clean the stainless steel buckle with warm soapy water and dry thoroughly.
• 수분: Keep the band away from excessive moisture to prevent damage to the vegan leather.
• 약: Avoid contact with harsh chemicals, solvents, or abrasive cleaners.

문제 해결

If you encounter issues with your smartwatch band, consider the following:

• 밴드가 맞지 않습니다: Ensure your watch has a 20mm lug width. Some watch models, even if listed as compatible, may have slight variations. Double-check the measurement between your watch's lugs. If the pins seem too small or do not sit correctly, re-verify the lug width.
• 밴드 분위기가 느슨해 보여요: Confirm that both quick-release pins are fully engaged in the watch lugs. Gently pull on the band to test its security.
• Discoloration or Peeling: This can occur over time with wear and exposure to elements. Follow the maintenance instructions to minimize wear.

명세서

보증 및 지원

Information regarding specific warranty coverage for this product is not provided. For any product-related inquiries or support, please refer to the retailer or seller from whom the product was purchased.