소개
The FLITI Christmas Decoration Projector Light is designed to illuminate your home with festive patterns and dynamic ocean wave effects. This projector features dual projection heads, offering both RGBW water ripple effects and various pattern images. It is suitable for year-round holiday decorations, including Christmas, Halloween, birthdays, and more. This manual provides essential information for proper setup, operation, and maintenance of your projector.
패키지 내용
모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.
- Christmas Projector Light x 1
- Interchangeable Slides x 19 (featuring 76 patterns and 11 festive themes)
- Mounting Package (includes round base and ground stake) x 1
- 원격 제어 x 1
- Power Cable (16.3 feet / 5 meters) x 1
- 사용 설명서 x 1
특징
- Enhanced Brightness and Clarity: Features upgraded projection technology for brighter and clearer images compared to previous models.
- Dual Projection Heads: Combines RGBW water wave effects with pattern projections for dynamic displays.
- 19 Interchangeable Slides: Includes a wide variety of slides for different holidays and occasions, such as Halloween, Christmas, birthdays, Valentine's Day, Thanksgiving, Easter, Mother's Day, and Father's Day.
- Non-Fading Digital Animation: Utilizes digital camera technology to maintain high-definition pattern quality over extended use, preventing fading common with film-based projectors.
- 조용한 작동: Equipped with a quiet rotation motor for minimal noise during operation.
- Wide Projection Area: Projects up to 32 feet, covering an area of up to 2137 square feet, suitable for most house exteriors.
- 조정 가능한 투사 각도: The light head rotates 180 degrees vertically, allowing for flexible projection angles.
- Improved Weather Resistance: Upgraded to IP65 waterproof rating for enhanced durability in outdoor conditions.
- 확장 전원 코드: A 16.3-foot (5-meter) power cord provides greater flexibility for placement.
- 다양한 설치 방법: Can be installed using a round base for floor or wall placement, or a ground stake for lawn insertion.
설정
- 설치 방법 선택:
- 지상 설치: Attach the ground stake to the projector base. Insert the stake firmly into the outdoor lawn or garden soil.
- 표면 설치: Attach the round base to the projector. Place the projector on a flat surface or mount it to a wall using appropriate hardware (not included).
- Insert Slide: Select your desired slide. Open the slide compartment on the projector, insert the slide, and close the compartment securely. Ensure the slide is correctly oriented for projection.
- 프로젝터 위치: Adjust the projector's position and the 180-degree rotatable head to achieve the desired projection area and angle on your wall or surface.
- 전원 연결: Plug the 16.3-foot power cord into a standard electrical outlet. Ensure the outlet is suitable for outdoor use if installing outdoors.
작동 지침
- 전원 켜기/끄기: Once plugged in, the projector will power on. Use the remote control to turn the projector on or off.
- Change Slides: To change the projected pattern, power off the projector, open the slide compartment, replace the current slide with a new one, and close the compartment. Power on the projector to see the new pattern.
- Adjust Projection Modes: Use the remote control to cycle through different projection modes, which may include static patterns, rotating patterns, water wave effects, or a combination of both.
- 속도 조정: The remote control allows you to adjust the rotation speed of the patterns and the movement speed of the water wave effect.
- 타이머 기능: Set a timer using the remote control for automatic shut-off after a specified duration.
유지
- 청소: Periodically wipe the projector lens and body with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- 슬라이드 관리: Handle slides carefully to avoid scratches or damage. Store them in a clean, dry place when not in use.
- 저장: 장기간 사용하지 않을 경우 프로젝터를 원래 포장이나 보호 용기에 담아 시원하고 건조한 곳에 보관하세요.
- 날씨 보호: While the projector is IP65 waterproof, avoid submerging it in water or exposing it to extreme weather conditions for prolonged periods.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No projection or dim light | Power not connected; Projector off; Damaged slide; Lens obstructed. | Ensure power cable is securely plugged in. Turn on the projector using the remote. Check if the slide is inserted correctly and undamaged. Clean the lens if dirty. |
| 흐릿한 투영 | Incorrect focus; Dirty lens/slide; Projector too far/close. | Adjust the distance to the projection surface. Clean the lens and slide. Ensure the slide is fully inserted. |
| Patterns not changing/moving | Static mode selected; Motor issue. | Use the remote control to select a dynamic or rotating pattern mode. If the issue persists, contact customer support. |
| 리모컨이 작동하지 않습니다 | Battery depleted; Obstruction; Out of range. | Replace the remote control battery. Ensure there are no obstructions between the remote and the projector. Operate within the specified range. |
명세서
| 상표 | 플리티 |
| 모델 번호 | Halloween-light-8.26 |
| 제품 유형 | Holiday Decoration Projector Light |
| 색상 | Black A-11 Theme |
| 모양 | Snowflake (referring to pattern type) |
| 재료 | 플라스틱 |
| 마무리 유형 | 영사기 |
| 광원 유형 | 주도의 |
| 전원 | 코드식 전기 |
| 권tage | 120볼트(AC) |
| 왓tage | 10 와트 |
| 장착 유형 | 바닥 장착, 벽면 장착 |
| 광원 특징 | RGB, Water Wave |
| 광원의 수 | 2 |
| 빔 각도 | 180도 |
| 품목 치수(L x W x H) | 5 x 4 x 6cm |
| 한국어: | 199284375338 |
| 포함된 구성 요소 | Slides, Remote Control |
보증 및 지원
FLITI offers a 30-day return and refund service 이 제품에 대한 추가 정보. 1년 보증 서비스 is provided from the date of purchase. For any questions, technical assistance, or warranty claims, please contact FLITI customer support through your retailer or the official FLITI web사이트. 보증 확인을 위해 구매 증빙 자료를 보관하세요.