Generic QDX1.5-32-0.75 Submersible Pump Instruction Manual

1. 서론

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Generic QDX1.5-32-0.75 Submersible Pump. Please read these instructions carefully before using the pump and retain this manual for future reference.

The QDX1.5-32-0.75 is a robust electric submersible pump designed for various water transfer applications, featuring a 1-inch outlet, a maximum head of 30 meters, and a maximum flow rate of 135 liters per minute. It operates on a 220V single-phase 60Hz AC power supply with a 0.75 kW (1 HP) motor.

2. 안전 정보

경고: 이러한 안전 지침을 따르지 않을 경우 감전, 화재, 심각한 부상 또는 사망이 발생할 수 있습니다.

• 유지보수, 설치 또는 청소를 하기 전에 항상 펌프의 전원을 차단하십시오.
• 전원 공급 장치 볼륨을 확인하십시오.tage matches the pump's specifications (220V, 60Hz).
• Do not operate the pump with a damaged power cord or plug. Replace immediately if damaged.
• Never run the pump dry. Ensure it is fully submerged in water during operation to prevent overheating and damage.
• Keep hands, feet, and clothing clear of the pump's intake and outlet during operation.
• Do not use the pump for flammable, corrosive, or explosive liquids. It is designed for clean water only.
• 전기 위험을 방지하기 위해 적절한 접지를 확인하십시오.
• 어린이가 이 제품을 가지고 놀지 못하도록 감독해야 합니다.

3. 제품 오버view

The Generic QDX1.5-32-0.75 Submersible Pump is constructed from durable aluminum, iron, and plastic components, designed for reliable performance in water pumping tasks.

이미지 1: 앞면 view of the Generic QDX1.5-32-0.75 Submersible Pump, showing the silver-colored pump body, black power cable, blue float switch, and the 1-inch outlet connection.

주요 특징:

• 모터 유형: 잠수 가능
• 전원: Electric (220V, 60Hz, Single Phase)
• 전력 출력: 0.75 kW (1 Horsepower)
• 최대 헤드 : 30 미터
• 최대 유량 : 분당 135리터
• 속도: 3600 RPM
• 건축 자재: 알루미늄, 철, 플라스틱
• 포함된 구성 요소: Submersible Pump unit

4. 설정

1. 짐 풀기: Carefully remove the pump from its packaging. Inspect for any signs of damage during transit.
2. 놓기: Position the pump in the desired location, ensuring it is on a stable, level surface and can be fully submerged in the water to be pumped. Avoid placing it directly on mud or sand to prevent clogging.
3. 호스 연결: Connect a suitable discharge hose to the 1-inch outlet of the pump. Secure the hose with a clamp to prevent leaks and disconnections during operation.
4. 전기 연결: Ensure the power outlet is properly grounded and matches the pump's electrical requirements (220V, 60Hz). Plug the pump into the power outlet. If a float switch is present, ensure it has free movement.
5. 잠수: Lower the pump into the water. Ensure the pump is completely submerged before connecting to power or starting operation.

5. 사용 설명서

1. 초기 시작: After completing the setup steps, plug the pump into the power source. The pump will start automatically if equipped with a float switch and the water level is sufficient.
2. 모니터링: Observe the pump's operation. Ensure water is being discharged smoothly and there are no unusual noises or vibrations.
3. Float Switch Operation: If your pump has a float switch, it will automatically turn the pump on when the water level rises and turn it off when the water level drops below a certain point. Ensure the float switch can move freely.
4. 종료: To stop the pump, simply unplug it from the power source. If using a float switch, the pump will stop automatically when the water level is low.
5. 드라이 러닝: Avoid dry running the pump. Prolonged operation without water will cause severe damage to the motor and seals.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your submersible pump.

• 유지보수 전: Always disconnect the pump from the power supply before any inspection or maintenance.
• 청소: Periodically clean the pump's intake screen to remove debris, leaves, or sediment that may obstruct water flow.
• 점검: Regularly inspect the power cord and plug for any signs of damage, cuts, or fraying. Check the discharge hose for blockages or wear.
• 저장: 펌프를 장기간 사용하지 않을 경우, 철저히 청소하고 물을 모두 빼낸 후 건조하고 동결되지 않는 장소에 보관하십시오.
• 플로트 스위치: 부유 스위치가 깨끗하고 자유롭게 움직이는지 확인하세요.

7. 문제 해결

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Standard return policies, such as a 15-day return period, may apply.