소개
The MOOER F4 Wireless Footswitch Controller is designed to enhance the functionality of compatible MOOER devices, such as the Prime P1. It provides hands-free control over various features including preset switching, looper functions, and drum machine operations, allowing musicians to focus on their performance. This manual provides essential information for the proper setup, operation, and maintenance of your F4 controller.
안전 정보
기기를 사용하기 전에 다음 안전 예방 조치를 읽고 이해하시기 바랍니다.
- 장치를 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
- 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
- 기기를 분해하거나 개조하지 마십시오. 보증이 무효화되고 손상이 발생할 수 있습니다.
- Use only the specified power adapter (5V 1A) for charging.
- 장치를 물이나 기타 액체에서 멀리 두십시오.
- 현지 규정에 따라 배터리를 폐기하십시오.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- MOOER F4 Wireless Footswitch Controller
- USB 충전 케이블
- 사용 설명서 (본 문서)
제품 끝view
The MOOER F4 features four assignable footswitches (A, B, C, D) and an indicator display for status feedback. Below are diagrams illustrating the main components.
그림 1: 상단 View of MOOER F4 Controller
그림 2: 하단 View of MOOER F4 Controller with Model and Power Information
구성 요소:
- 풋스위치 A, B, C, D: Used for various control functions such as preset switching, looper control, and drum machine operations.
- 디스플레이 화면: Shows current status, mode, and other relevant information.
- USB 충전 포트 : USB 충전 케이블을 연결합니다.
- 전원 표시기: 배터리 상태 및 충전 여부를 나타냅니다.
설정
1. Charging the F4 Controller
Before initial use, fully charge the F4 controller. Connect the provided USB charging cable to the F4's charging port and to a standard USB power adapter (5V 1A, not included). The power indicator will show charging status and turn off when fully charged.
2. Pairing with a Compatible Device (e.g., MOOER Prime P1)
The F4 controller is designed to work wirelessly with compatible MOOER devices. Follow these general steps for pairing:
- Ensure both the F4 and your compatible MOOER device (e.g., Prime P1) are powered on and sufficiently charged.
- Refer to the user manual of your MOOER device for specific instructions on enabling Bluetooth or wireless pairing mode.
- On the F4, typically a long press of a specific footswitch or a combination of buttons will initiate pairing mode. Consult the F4's quick start guide or the MOOER device's manual for the exact procedure.
- Once in pairing mode, the F4's display or indicator light will show a pairing status.
- Confirm the connection on your MOOER device. The F4's display should indicate a successful connection.
Figure 3: MOOER F4 connected with a MOOER Prime P1
운영
The F4 footswitch controller offers versatile control over your MOOER Prime P1 or other compatible devices. The specific functions of each footswitch (A, B, C, D) are typically assigned and configured within the connected device's software or app.
프리셋 스위칭
In preset mode, each footswitch can be assigned to switch between different presets or patches on your connected device. A single press typically activates the assigned preset.
Looper Control
When controlling a looper function, the footswitches can be assigned to actions such as:
- 녹음/재생: Start recording a loop or play back the current loop.
- 오버더빙: Add layers to an existing loop.
- 중지: Halt loop playback.
- 실행 취소/다시 실행: Reverse or reapply the last looper action.
- 분명한: Delete the current loop.
Drum Machine Control
For devices with a built-in drum machine, the F4 footswitches can be configured to control various drum machine parameters:
- 시작/중지: Begin or end drum pattern playback.
- Pattern Select: Cycle through different drum patterns.
- 탭 템포: Set the tempo of the drum machine by tapping a footswitch.
Note: Refer to the specific manual of your MOOER Prime P1 or other compatible device for detailed instructions on assigning and customizing footswitch functions.
유지
청소
To clean the F4 controller, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these may damage the finish or internal components.
배터리 관리
- 배터리를 자주 완전히 방전시키지 마세요.
- 기기를 장기간 보관할 경우 배터리 수명 연장을 위해 약 50%까지 충전해 두십시오.
- Recharge the device every few months if not in use to prevent deep discharge.
저장
Store the F4 in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it protected from dust and moisture.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| F4 does not power on. | 배터리가 부족하거나 방전되었습니다. | Charge the F4 using the provided USB cable and a 5V 1A adapter. |
| Cannot connect/pair with Prime P1. | F4 or Prime P1 not in pairing mode; interference; out of range. | Ensure both devices are in pairing mode. Move closer to the Prime P1. Restart both devices and try pairing again. Check Prime P1 manual for specific pairing steps. |
| 풋스위치가 작동하지 않습니다. | Not properly connected; incorrect mode selected on Prime P1; footswitch assignments not configured. | Verify successful connection. Check the Prime P1's current mode. Configure footswitch assignments within the Prime P1's software/app. |
| 배터리 수명이 짧습니다. | Battery degradation; frequent use; not fully charged. | Ensure the device is fully charged before use. If battery life remains short, contact MOOER support. |
명세서
| 특징 | 사양 |
|---|---|
| 모델명 | F4 (Prime P1 Wireless Footswitch) |
| 상표 | 무어 |
| 컨트롤러 유형 | Guitar Footswitch |
| 연결 기술 | Wireless, USB (for charging) |
| 버튼 수량 | 4 |
| 전원 | 배터리 구동 |
| 품목 무게 | 0.3 킬로그램 |
| 품목 치수(L x W x H) | 8.82 x 1.57 x 1.5 인치 |
| 호환 장치 | MOOER Prime P1, Windows (for associated software/app) |
보증 및 지원
For warranty information and technical support, please refer to the official MOOER web사이트를 방문하거나 가까운 대리점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
공식 MOOER Web대지: www.mooeraudio.com
공식 제품 영상
이 설명서에 삽입할 수 있는 판매자의 공식 제품 비디오는 없습니다.