소개
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp사용하시기 전에 꼼꼼히 읽어보시고, 나중에 참조할 수 있도록 보관해 주십시오.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
안전 정보
안전한 작동을 보장하고 손상을 방지하려면 다음 안전 예방 조치를 준수하세요.
- 실내에서만 사용 가능: 이 lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- 전기 안전: l을 확인하세요amp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- 열 경고: 난amp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- 안정적인 배치: l을 놓으세요amp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- 어린이와 애완동물로부터 멀리 유지하십시오: Due to the heat generated, keep the lamp 어린이와 애완 동물의 손이 닿지 않는 곳에.
- 통풍: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- 손상된 코드: 전원 코드가 손상된 경우 위험을 방지하기 위해 제조업체나 자격을 갖춘 서비스 담당자를 통해 교체해야 합니다.
패키지 내용
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
설정
Follow these steps to set up your Jambo Liquid Motion Lamp:
- 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
- 전구 설치: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- 캡을 부착하세요: Place the decorative cap onto the top of the glass vessel.
- 위치 Lamp: 조립된 l을 놓습니다.amp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- 전원 연결: 전원 코드를 표준 120볼트 전기 콘센트에 꽂으세요.
작동 지침
Operating your Jambo Liquid Motion Lamp 간단합니다 :
- 켜기: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- 워밍업 시간: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- 운영 기간: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- 끄기: l을 끄려면amp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
유지
Proper care will ensure the longevity and performance of your lamp:
- 청소: l을 확인하세요amp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp 천을 사용하십시오. 연마성 세제를 사용하거나 제품의 어떤 부분도 물에 담그지 마십시오.amp 물속에서.
- 전구 교체: 전구가 타버린 경우, 전구의 플러그를 뽑으세요.amp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- 저장: l을 보관하는 경우amp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- 열지 마: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
문제 해결
If you encounter issues with your Jambo Liquid Motion Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamp 켜지지 않습니다. | No power, faulty bulb, or loose connection. | l인지 확인하세요amp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | l을 완성하는 데 2~4시간이 소요됩니다.amp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| 액체가 탁하다. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | l을 확인하세요amp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
명세서
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | KL-217 |
| 치수(D x W x H) | 11.4cm x 11.4cm x 39.4cm (약 4.5 x 4.5 x 15.5인치) |
| 그늘 높이 | 16인치 |
| 전원 | 코드식 전기 |
| 권tage | 120 볼트 |
| 왓tage | 30 와트 |
| 전구 유형 | 백열전구 |
| 전구베이스 | E17 |
| 스위치 유형 | 회전식 |
| 기본 소재 | 알류미늄 |
| 그늘 소재 | 유리 |
| 마무리 유형 | 메탈릭 |
| 실내/실외 사용 | 실내 |
| 방수 레벨 | 방수가 아닙니다 |
| 한국어: | 850019692297 |
보증 및 지원
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo web연락처 정보 사이트.