1. 서론
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Generic PCP Air Compressor. Please read this manual thoroughly before using the compressor to ensure proper function and to prevent injury or damage.
The PCP Air Compressor is designed for high-pressure air applications, capable of reaching 4500 PSI (300 Bar). It features a compact design, fan cooling, and multiple power options (12V DC, 110V AC, 220V AC) for versatile use.
2. 안전 정보
Adhering to these safety guidelines is crucial for preventing accidents and ensuring the longevity of your compressor.
- 전기 연결: When connecting to a car battery, ensure the red wire is connected to the positive (+) terminal and the black wire to the negative (-) terminal. Incorrect polarity can damage the unit.
- 사전 작업 확인: Before starting the machine, confirm that the cooling fan is operating normally and that there are no abnormal sounds (e.g., friction, uneven operation, air leaks).
- 체결 부품 검사: Verify that all fasteners on the unit are tight and secure before each use. Loose fasteners can lead to operational issues or safety hazards.
- 압력 감쇄 밸브: Always ensure the pressure relief valve is tightened before starting the compressor. Monitor the pressure gauge needle's movement during operation.
- 통풍: Operate the compressor in a well-ventilated area to ensure proper heat dissipation.
- 어린이와 애완동물: 압축기가 작동하는 동안 어린이와 애완동물이 압축기에 접근하지 못하도록 하세요.
3. 제품 특징
- 효율적인 냉각: Integrated fan cooling system for rapid heat dissipation, protecting the machine and extending its lifespan.
- 디지털 디스플레이: Liquid crystal display for real-time monitoring of machine parameters.
- 고성능 출력: 350W motor for fast inflation speeds and high efficiency.
- 소형 및 휴대성: Small size and lightweight design (approximately 5.2 kg / 11.5 lbs) for easy transport and outdoor use.
- 다양한 전원 옵션: Compatible with 12V DC, 110V AC, and 220V AC power sources.
- 자동 종료: Equipped with an automatic shut-off feature for safety and convenience.
4. 설정
Follow these steps to set up your PCP Air Compressor for operation:
- 볼륨 확인tag전자 설정: If using the AC power converter, ensure the voltage setting on the converter matches your local power supply (110V or 220V).
- 전원 연결: Connect the appropriate power source (12V DC from a car battery or 110V/220V AC via the transformer) to the compressor.
- 공기 호스 연결: Attach the high-pressure air hose to the compressor's output port and to the item you intend to inflate (e.g., PCP air rifle, paintball gun).
- 공기 배출 밸브를 조이세요: Ensure the bleed valve (pressure relief valve) is fully tightened before starting the compressor.
5. 사용 설명서
압축기 설치가 완료되면 다음 단계를 따라 작동하십시오.
- 전원 켜기: Turn on the main power switch on the compressor. The digital display should illuminate.
- 모니터 압력: Observe the pressure gauge and the digital display. The compressor will begin to fill the connected air tank or device.
- 자동 종료: The compressor is equipped with an automatic shut-off feature. It will stop once the preset pressure (up to 4500 PSI / 300 Bar) is reached.
- 수동 전원 차단: You can manually turn off the compressor at any time by flipping the power switch.
- 블리드 에어: After inflation, slowly open the bleed valve to release residual pressure from the hose before disconnecting.
- 연결 해제: Once pressure is released, disconnect the air hose from your device and the compressor.
6. 유지관리
정기적인 유지보수는 최적의 성능을 보장하고 컴프레서의 수명을 연장합니다.
- 냉각 팬: Periodically check the cooling fan for obstructions and ensure it runs freely. Keep the fan vents clear of dust and debris to maintain efficient heat dissipation.
- 일반 청소: Keep the exterior of the compressor clean and free of dirt. Use a dry cloth for cleaning. Do not use harsh chemicals or immerse the unit in water.
- 저장: 압축기는 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
- 패스너: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하십시오.
7. 문제 해결
If you encounter issues with your compressor, refer to the following common troubleshooting tips:
- 압축기가 시동되지 않음:
- Check power connections. Ensure the power cable is securely plugged in and the power source (12V, 110V, or 220V) is active.
- If using 12V, verify correct battery polarity (red to +, black to -).
- Ensure the main power switch on the compressor is in the 'ON' position.
- Abnormal Sounds (Friction, Uneven Operation, Air Leakage):
- Immediately turn off the compressor.
- Inspect for any loose fasteners or connections.
- Check the air hose for damage or improper connection.
- Ensure the cooling fan is not obstructed and is spinning freely.
- 문제가 지속되면 사용을 중단하고 고객지원팀에 문의하세요.
- Slow Inflation or Low Pressure:
- Ensure the bleed valve is fully tightened.
- Check for any leaks in the air hose or connections.
- Verify the power supply is stable and providing adequate voltage.
8. 사양
| 매개변수 | 값 |
|---|---|
| 작동 압력 | 4500 PSI / 30 MPa / 300 Bar |
| 냉각 시스템 | 팬 냉각 |
| 모터 정격 전력 | 350와트 |
| 권tage | 12V DC, 110V AC, 220V AC |
| 품목 무게 | 5.2kg / 11.5파운드 |
| 치수(길이 x 너비 x 높이) | 30 x 25 x 25cm / 11.81 x 9.84 x 9.84인치 |
| 특징 | 자동 종료 |
9. 패키지 내용
다음 항목이 패키지에 포함되어 있습니다.
- 1 x High Pressure Air Compressor
- 1 x Transformer (for AC power)
- 1 x Accessory Kit (includes various seals, O-rings, and connectors)
- 1 x 사용자 설명서
10. 지원
If you have any questions, require assistance, or encounter issues not covered in this manual, please contact customer support. We are committed to providing a satisfactory solution as soon as possible.
