소개
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Smart Motion Sensor Light. This hardwired outdoor floodlight features Bluetooth APP control, 5000K LED illumination, and IP65 waterproof rating, designed to enhance your home security and convenience.
Figure 1: OREiN Smart Motion Sensor Light with App Control Interface.
This image shows the OREiN Smart Motion Sensor Light mounted on an exterior wall, highlighting its sleek design and the accompanying smartphone application interface for control.
안전 정보
- 전기 안전: Installation requires hardwiring to an AC power source (110 Volts). Ensure power is turned off at the circuit breaker before beginning installation. If you are not familiar with electrical wiring, consult a qualified electrician.
- 방수: The product is IP65 waterproof, suitable for outdoor use. However, ensure all connections are properly sealed during installation to prevent water ingress into the wiring.
- 설치: The base of the light is 5.12 inches x 5.12 inches. Verify sufficient space and a secure mounting surface before installation.
- 작동 온도: Designed for outdoor conditions, but avoid extreme temperatures outside the specified operating range.
패키지 내용
설치를 진행하기 전에 모든 구성 요소가 있는지 확인하세요.
- OREiN Smart Motion Sensor Light Unit (1 Head)
- 장착 하드웨어(나사, 와이어 너트, 장착 브래킷)
- LED Beads (integrated)
- Filter Lens (integrated)
- 사용 설명서(본 문서)
Figure 2: Included Mounting Hardware.
This image displays the small bag containing the necessary screws, wire nuts, and mounting bracket for installation.
설정 및 설치
설치 전 체크리스트:
- 작업을 시작하기 전에 회로 차단기에서 전원이 꺼져 있는지 확인하십시오.
- Confirm the mounting location has sufficient space (base is 5.12"x5.12").
- Gather necessary tools (screwdriver, wire strippers, sealant).
설치 단계:
- 장착 브래킷을 고정하세요: Secure the provided mounting bracket onto your junction box using the appropriate screws.
- 전선 연결: Carefully connect the wires of the same color (live, neutral, ground) from your house wiring to the light fixture's wires using the wire nuts. Ensure connections are secure.
- Secure the Wire Connection: Use electrical tape or additional sealant around the wire nuts and connections to enhance waterproofing and prevent moisture from reaching the electrical components.
- 빛을 확보하세요: Attach the light fixture to the mounting bracket, ensuring it is firmly in place. Plug in any waterproof plugs if applicable.
그림 3: 설치 과정 완료view.
This visual guide illustrates the four main steps for installing the OREiN Smart Motion Sensor Light, from securing the mounting bracket to the final attachment of the light fixture.
App Download and Initial Pairing:
The OREiN Smart Motion Sensor Light is controlled via a Bluetooth-enabled app. 검색 the "AiDot" app on your smartphone's app store (iOS or Android) and install it. Follow the in-app instructions to pair your device. The light will blink twice when it is in pairing mode.
작동 지침
수동 제어:
The light features a single button for basic control. Click the button (within 1 second) to cycle through the two primary modes: Light Mode and Motion Mode. Refer to the product packaging for a detailed diagram of manual mode cycling.
Smart App Control (Recommended):
For full customization and convenience, use the AiDot app. This allows you to adjust settings without needing a ladder.
- 온/오프 제어: Remotely turn the light on or off.
- 밝기 조정: Customize the light intensity from 0% to 100%.
- 사전 설정 모드 : Switch between three main modes:
- 모션 모드 : Light turns on when motion is detected and automatically turns off after a set delay time.
- 라이트 모드: Functions as a normal light, automatically turning on during its effective time (e.g., dusk to dawn).
- 보안 모드: Light deters intruders by flashing or changing color (e.g., red light flashes) when motion is sensed. This mode is primarily controlled via the app.
- 맞춤 설정: Set delay times for motion mode, dim light mode percentages, and night economy mode for reduced light pollution after midnight.
- 타이머: Schedule specific on/off times for the light.
- 그룹 제어: Control multiple OREiN smart lights simultaneously via Bluetooth. Note: These lights are not compatible with Wi-Fi connection for group control.
Figure 4: Operational Modes.
This image illustrates the three primary operational modes: Motion Mode (light activates upon movement), Light Mode (continuous illumination), and Security Mode (flashing light for deterrence).
Figure 5: App Customization Interface.
This image displays the smartphone app's interface, demonstrating how users can customize the light's brightness, delay time, and effective operating hours.
Figure 6: Bluetooth Group Control.
This image illustrates the capability of controlling multiple OREiN lights simultaneously through Bluetooth, enabling synchronized lighting across different areas of a property.
유지
- 청소: 조명기구를 주기적으로 부드러운 천으로 닦아주세요.amp 천으로 먼지와 이물질을 제거하세요. 연마성 세제나 용제는 사용하지 마세요.
- 점검: Regularly inspect the light for any signs of damage, loose connections, or wear. Ensure the IP65 seal remains intact.
- 렌즈 선명도: Keep the filter lens clear to ensure optimal light output and motion sensor performance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | No power, loose wiring, faulty unit. | Check circuit breaker. Verify all wire connections are secure. If issues persist, contact support. |
| 모션 센서가 감지되지 않습니다. | Obstruction, incorrect sensitivity setting, sensor dirty. | Clear any obstructions. Adjust sensitivity in the app. Clean the sensor lens. |
| 앱 연결 문제. | Bluetooth interference, light not in pairing mode, app outdated. | Ensure Bluetooth is enabled on your device. Restart the light. Update the AiDot app. Ensure you are within Bluetooth range. |
| Light flashes unexpectedly. | Security Mode activated, electrical fluctuation. | Check app settings to ensure Security Mode is not enabled. Consult an electrician if electrical issues are suspected. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 오레인 |
| 모델 번호 | OL1900156 |
| 색상 | 검은색 |
| 스타일 | 현대의 |
| 전등 형태 | 벽 |
| 실내/실외 사용 | 집 밖의 |
| 전원 | 하드와이어드(AC) |
| 설치 유형 | Floor Mount (also supports Wall/Soffit) |
| 제어 방법 | 앱(블루투스) |
| 광원 유형 | 주도의 |
| 그늘 소재 | 폴리카보네이트 |
| 광원의 수 | 1 |
| 권tage | 110볼트(AC) |
| 조명 색온도 | 5000K(화이트) |
| 왓tage | 5.5 와트 |
| 스위치 유형 | 모션 센서 |
| 방수 레벨 | IP65 방수 |
| 명도 | 720루멘 |
| 품목 무게 | 1.06파운드 |
| 제품 치수 | 4.3 x 4.3 x 4.7 인치 |
보증 및 지원
OREiN provides comprehensive support for its products:
- 보증: The OREiN Smart Motion Sensor Light comes with a 24개월 보증.
- 온라인 도움말: 즐기다 7*24 hours online help for any using issues.
- Call Support: Call support is available during working hours at 1-844-506-1530.
- 보고: You can return any item purchased through Amazon's logistics. However, OREiN suggests contacting them before returning for potential direct resolution.
- 연락하다: For any inquiries, contact OREiN directly on Amazon or search for their brand online.