Amazon Basics AC010115

아마존 베이직스 휴대용 자동차 타이어 공기 주입기 사용 설명서

모델 : AC010115

브랜드: 아마존 베이직스

1. 중요한 안전 정보

본 제품을 작동하기 전에 모든 안전 경고 및 지침을 읽고 이해하십시오. 이 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.

  • This product is designed for inflating vehicle tires and other inflatables. Do not use it for purposes other than its intended use.
  • Ensure the vehicle engine is running when using the inflator to prevent draining the vehicle's battery.
  • This product can only be used with vehicle power sockets rated at 15A/180W or higher.
  • Do not operate the inflator continuously for more than 10 minutes. Allow it to cool down for at least 15 minutes between uses to prevent overheating.
  • 작동 중에는 어린이와 애완동물이 인플레이터에 접근하지 못하도록 하세요.
  • 공기 주입기를 비나 습기에 노출시키지 마십시오.
  • Always check the recommended tire pressure for your vehicle, typically found on a sticker inside the driver's side door jamb or in the vehicle's owner's manual.
  • Disconnect the power cord from the vehicle's 12V DC outlet when not in use.
  • Store the inflator in a dry, cool place.

2. 제품 오버view

The Amazon Basics Portable Car Tire Inflator is designed for convenient and accurate tire inflation, featuring a digital pressure gauge and auto shut-off function.

Amazon Basics Portable Car Tire Inflator

그림 2.1: The Amazon Basics Portable Car Tire Inflator, showing its compact black and yellow design with a digital display and coiled air hose.

주요 특징:

  • 디지털 압력 게이지: Provides precise pressure readings.
  • 자동 차단 : 설정된 압력에 도달하면 자동으로 공기 주입이 멈춥니다.
  • Universal Valve Connector: Compatible with Schrader valves, suitable for cars, bikes, sedans, and midsize SUVs (engine size under 3.5 liters).
  • 다기능: Includes battery and alternator testing capabilities.
  • 통합 LED 조명: 조명이 어두운 환경에서 조명을 위해 사용됩니다.
  • 컴팩트한 디자인: 휴대가 간편하고 보관하기 쉽습니다.
Engineered for Precision features of the tire inflator

그림 2.2: Diagram highlighting key features: user-friendly large digital screen, extended hose length (9.2 ft / 2.8 m), Schrader valve compatibility, and a 1.2 inch / 30 mm metal cylinder for durability.

Heavy-Duty Air Power features of the tire inflator

그림 2.3: Illustration of the inflator's performance metrics: air flow speed of 35L per minute, maximum pressure of 150 PSI, display of preset pressures, intended for indoor use only, and a red LED flashing light for emergencies. Also shows the convenient rear unit cord organizer.

Dimensions of the tire inflator

그림 2.4: Product dimensions: 9.44 inches (24 cm) in length, 9.05 inches (23 cm) in width, and 4.33 inches (11 cm) in height.

3. 설정 및 초기 사용

Before using the tire inflator, ensure your vehicle's 12V DC power socket is rated at 15A/180W or higher.

Steps for Setup:

  1. 차량 준비: Ensure your vehicle is parked safely and the engine is running. This provides stable power to the inflator and prevents battery drain.
  2. 전원 연결: Plug the 12V DC power cord of the inflator into your vehicle's cigarette lighter or 12V accessory outlet.
  3. 타이어 밸브 접근: 공기를 주입할 타이어에서 밸브 캡을 제거하세요.
  4. 공기 호스 부착: Securely screw the inflator's air hose connector onto the tire valve stem. Ensure a tight seal to prevent air leakage.
Four easy steps to inflate tires

그림 3.1: Visual guide for tire inflation: 1) Turn on the vehicle engine, 2) Plug the 12V DC cord into the vehicle's cigarette lighter, 3) Connect the air hose to the vehicle tire, and 4) Monitor for pre-defined pressure on the inflator's display.

4. 사용 설명서

4.1. 타이어 공기압

  1. Follow steps 1-4 from the "Setup and Initial Use" section.
  2. 원하는 압력 설정: Use the '+' and '-' buttons on the inflator's digital display to set your target tire pressure (PSI, BAR, or KG/CM²). Refer to your vehicle's manual or door jamb sticker for the recommended pressure.
  3. 단위 선택: Press the 'Unit' button to cycle through available pressure units (PSI, BAR, KG/CM²).
  4. 인플레이션 시작: Press the 'M' (Mode/Start) button to begin inflation. The inflator will automatically stop once the preset pressure is reached.
  5. 진행 상황 모니터링: The digital screen will show the actual pressure and a progress bar during inflation.
  6. 연결 해제: Once inflation is complete and the unit has stopped, disconnect the air hose from the tire valve and replace the valve cap. Unplug the 12V DC power cord from your vehicle.
Tire inflator in use next to a car tire

그림 4.1: The portable tire inflator actively inflating a car tire, demonstrating its compact size and ease of use in a real-world scenario.

Pressure Unit Measurement display

그림 4.2: Close-up of the digital display showing options for pressure unit measurement: PSI, BAR, and KG/CM².

Pump display showing pressure details

그림 4.3: 상세한 view of the pump's digital display, indicating preset pressure, selected pressure unit, actual pressure, and a progress bar during inflation.

4.2. Battery and Alternator Testing

This inflator can also test your vehicle's battery and alternator health.

  1. Ensure the inflator is plugged into the vehicle's 12V DC outlet.
  2. Press the 'Battery/Alternator' button. The display will show the battery voltage.
  3. Start the vehicle's engine. The display will then show the alternator voltage and status (e.g., "Good", "Low").
  4. Refer to your vehicle's manual for ideal battery and alternator voltage 범위.
Alternator Test display

그림 4.4: Display showing the alternator test results, including actual alternator voltag전자 및 상태.

4.3. LED 조명 사용

The integrated LED light can be used for illumination in dark environments.

  • Press the 'Light' button to turn the LED light on or off.
  • The light can be used independently of the inflation function, as long as the unit is powered.

5. 유지관리

적절한 유지 관리는 타이어 공기 주입기의 수명과 최적의 성능을 보장합니다.

  • 청소: 인플레이터 외부를 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
  • 저장: Store the inflator in a dry, cool place, away from direct sunlight and extreme temperatures. Utilize the convenient rear cord organizer to keep the power cord neatly stored.
  • Air Hose Care: Ensure the air hose is not kinked or damaged during storage.
  • 퓨즈 교체: If the inflator stops working, check the fuse located in the 12V DC power plug. Replace it with a fuse of the same rating (typically 15A). A spare fuse is usually included with the product.

6. 문제 해결

If you encounter issues with your Amazon Basics Portable Car Tire Inflator, refer to the following common problems and solutions:

문제가능한 원인해결책
인플레이터가 켜지지 않습니다.
  • No power from vehicle's 12V outlet.
  • Blown fuse in the 12V plug or vehicle.
  • 연결이 느슨함.
  • Ensure vehicle engine is running.
  • Check and replace the fuse in the 12V plug. Check vehicle's fuse box.
  • 플러그가 콘센트에 완전히 삽입되었는지 확인하세요.
Inflator runs but no air comes out or inflates slowly.
  • Air hose not securely connected to tire valve.
  • Tire valve core is faulty.
  • Inflator is overheated.
  • Tighten the air hose connection to the tire valve.
  • Inspect tire valve core for damage; replace if necessary.
  • Allow the inflator to cool down for at least 15 minutes.
Digital display is not working correctly.
  • 전력이 낮음.
  • 내부 오류.
  • Ensure stable power supply from vehicle.
  • 문제가 지속되면 고객 지원팀에 문의하세요.
Auto shut-off not working.
  • Incorrect preset pressure.
  • 센서 오작동.
  • Verify the preset pressure is correctly entered.
  • 고객 지원팀에 문의하세요.

7. 사양

특징세부 사항
모델 번호AC010115
전원12V DC (Vehicle Power Socket)
최대 작동 압력150 PSI (10.3 바)
공기 흐름 속도분당 35리터
소음 수준80데시벨
제품 크기(L x W x H)9.25 x 9.25 x 4.53인치(23.5 x 23.5 x 11.5cm)
품목 무게3.46파운드(1.57kg)
포함된 구성 요소User Manual, Accessory nozzles (for balls, inflatables), Spare fuse

8. 보증 및 지원

For warranty information and customer support, please refer to the official Amazon Basics documentation or visit the Amazon Basics support page.

A digital copy of the warranty document is available at: Amazon Basics 보증서 (PDF)

For further assistance, please contact Amazon customer service.

© 2025 Amazon Basics. 모든 권리 보유.

관련 문서 - AC010115

사전view Amazon Basics Portable Air Compressor Pump with Digital Pressure Gauge User Manual
Comprehensive user manual for the Amazon Basics Portable Air Compressor Pump (Model B0B5DHMN7W). Learn how to inflate tires, check pressure, test battery/alternator, and more. Features digital gauge, preset function, LED light, and 12V DC operation.
사전view Amazon Basics Tire Inflator with Digital Gauge - 200 PSI User Manual
This user manual provides instructions and safety information for the Amazon Basics Tire Inflator with Digital Gauge, designed for checking and adjusting tire pressure with a maximum capacity of 200 PSI. Learn about its specifications, operation, maintenance, and troubleshooting.
사전view Amazon Basics Contour Gauge Set (5-Inch & 10-Inch) - User Manual & Safety Guide
Comprehensive user manual and safety instructions for the Amazon Basics Contour Gauge Set, including how to use, clean, and dispose of the 5-inch and 10-inch profile gauges. Model B08XJMQ2LC.
사전view Amazon Basics 창문 부착형 에어컨(기계식 제어 방식) 사용 설명서
이 사용 설명서는 기계식 제어 방식의 아마존 베이직스 창문형 에어컨의 설치 및 작동 방법을 안내합니다. 안전 주의사항, 제품 개요 등을 다룹니다.view설치 단계 및 사용 목적.
사전view Amazon Basics 1/4인치 드라이브 클릭 토크 렌치 사용 설명서
User manual and operating instructions for the Amazon Basics 1/4-Inch Drive Click Torque Wrench (20-150 inch-lb, 2.5-15 Nm).
사전view Amazon Basics Soft Roll Up Tonneau Cover User Manual
Comprehensive installation and maintenance guide for the Amazon Basics Soft Roll Up Tonneau Cover. Includes compatibility details for various truck models, safety instructions, and cleaning tips.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.