Alecto ADB20 Wireless Doorbell

1. 서론

구매해주셔서 감사합니다asing the Alecto ADB20 Wireless Doorbell. This manual provides essential information for the safe and efficient use of your new doorbell system. Please read these instructions carefully before installation and retain them for future reference.

The Alecto ADB20 is a wireless doorbell system designed for ease of installation and reliable performance. It features an IP56 waterproof outdoor transmitter and a portable indoor receiver, offering a range of up to 200 meters in open areas and 50 meters indoors. With 52 selectable melodies and 5 adjustable volume levels, you can customize your doorbell experience. The system is also expandable, allowing connection of up to 6 additional receivers.

2. 패키지 내용

모든 품목이 모두 있고 상태가 양호한지 확인하세요.

• 1 x Wireless Doorbell Transmitter (Outdoor Unit)
• 1 x Wireless Doorbell Receiver (Indoor Unit)
• 1 x A23 (12V) Battery for Transmitter
• 1 x 양면 접착 테이프
• 장착 나사 및 벽면 플러그
• User Manual (English and other languages)

3. 안전 지침

• Do not expose the receiver to rain or moisture. The transmitter is IP56 waterproof, suitable for outdoor use, but avoid submerging it in water.
• 제품을 직접 열거나 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
• Use only the specified battery type (A23 12V) for the transmitter. Ensure correct polarity when inserting batteries.
• 사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.
• 배터리는 어린이의 손이 닿지 않는 곳에 보관하십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
• Avoid placing the receiver near strong electromagnetic fields, which may interfere with its operation.

4. 설정 및 설치

4.1 Installing the Transmitter (Outdoor Unit)

1. 배터리 삽입: Open the back cover of the transmitter. Insert the supplied A23 (12V) battery, ensuring the correct positive (+) and negative (-) polarity. Close the cover securely.
2. 위치를 선택하십시오 : Select a suitable location near your front door. Ensure the surface is clean and dry. The transmitter is IP56 waterproof, making it suitable for outdoor installation.
3. 설치: 두 가지 장착 옵션이 있습니다.
   • 접착 테이프: Peel off one side of the double-sided adhesive tape and stick it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired surface for at least 30 seconds.
   • 나사: Use the provided screws and wall plugs to securely attach the transmitter to the wall. Mark the drill points, drill holes, insert wall plugs, and then screw the transmitter into place.

Image: The Alecto ADB20 wireless doorbell transmitter unit, showing the large central button.

4.2 Setting Up the Receiver (Indoor Unit)

1. 전원 켜기: The receiver is battery operated. Insert the required batteries (type not specified in product details, typically AA or AAA, please check the unit's battery compartment for specific type and quantity).
2. 놓기: Place the receiver in a convenient location within your home where you can easily hear the doorbell. Consider the maximum indoor range of 50 meters (up to 200 meters in open areas) when choosing a spot.
3. 페어링(필요한 경우): The units are usually pre-paired from the factory. If they do not connect automatically, refer to the troubleshooting section or the full manual for pairing instructions. The ADB20 uses an encrypted signal to prevent interference.

Image: The Alecto ADB20 wireless doorbell receiver unit, showing the speaker grille and controls.

이미지: 후면 view of the Alecto ADB20 receiver, showing the battery compartment and mounting options.

5. 사용 설명서

5.1 멜로디 변화

The Alecto ADB20 offers 52 different melodies. To change the melody:

1. Locate the melody selection button on the side of the receiver unit.
2. Press the button repeatedly to cycle through the available melodies. Each press will play the next melody.
3. Once you hear a melody you like, stop pressing the button. The selected melody will be saved and used for future doorbell rings.

5.2 볼륨 조절

The receiver has 5 adjustable volume levels, ranging from 0 dB (mute) to 110 dB (maximum volume). To adjust the volume:

1. Locate the volume control button on the side of the receiver unit.
2. Press the button repeatedly to cycle through the 5 volume levels. Each press will adjust the volume up or down.
3. 원하는 볼륨 레벨을 선택하세요.

5.3 시스템 확장

The Alecto ADB20 system is expandable. You can add up to 6 additional receivers to your existing doorbell transmitter. This is useful for larger homes or multi-story buildings to ensure the doorbell can be heard in various locations.

To add an additional receiver, follow the pairing instructions provided with the new receiver unit. Typically, this involves putting the receiver into a pairing mode and then pressing the transmitter button.

6. 유지관리

6.1 배터리 교체

• 송신기: When the doorbell button no longer activates the receiver, or the range significantly decreases, it may be time to replace the A23 (12V) battery in the transmitter. Open the back cover, remove the old battery, insert a new one with correct polarity, and close the cover.
• 수화기: If the receiver stops sounding or its volume becomes low, replace its batteries (refer to the battery type indicated in the receiver's battery compartment).

6.2 청소

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. The transmitter is waterproof, but avoid using high-pressure water jets directly on it.

7. 문제 해결

8. 사양

• 모델: ADB20
• 제조업체: 알렉토
• 색상: 하얀색
• 송신기 전원: 1 x A23 (12V) Alkaline Battery (Included)
• 수신기 전원 공급원: Batteries (Type to be confirmed on unit, typically AA/AAA)
• 방수 등급(송신기): IP56
• 작동 범위: Up to 200 meters (open field), up to 50 meters (indoors)
• 멜로디: 52 선택 가능
• 볼륨 레벨: 5 (0 dB to 110 dB)
• 확장 성 : Up to 6 additional receivers
• 치수(송신기): 8.1 x 2.5 x 8.1cm
• 제품 무게: 150g (전체 패키지)

9. 보증 및 지원

The Alecto ADB20 Wireless Doorbell comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Alecto web자세한 보증 약관은 해당 사이트에서 확인하세요.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact your retailer or the Alecto customer service department. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장.