1. 설치 및 조립
The LEQISMART S11 Electric Scooter comes mostly pre-assembled, requiring minimal setup before its first use. Follow these steps to prepare your scooter for riding.
1.1 언박싱 및 초기 검사
Carefully remove all components from the packaging. Ensure all parts are present and undamaged. The main components include the folded scooter body, handlebars (left and right), charger, and hex keys for assembly.
Image: The LEQISMART S11 Electric Scooter in its initial state, partially assembled within its packaging.
1.2 스쿠터 펼치기
Locate the folding mechanism at the base of the handlebar stem. Lift the buckle lock and pull the stem upwards until it clicks securely into the upright position. Ensure the locking lever is fully engaged for safety.
1.3 Attaching the Handlebars
The handlebars are labeled 'L' for left and 'R' for right. Carefully screw each handlebar into its corresponding side of the stem. Use the provided hex keys to tighten them securely. Ensure the brake lever (left side) and throttle (right side) are positioned comfortably for easy access.
Image: The scooter in its folded state, highlighting its compact design for portability.
1.4 초기 충전
Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port located on the scooter's deck. The charging indicator on the charger will show the charging status. A full charge typically takes approximately 4.5 hours.
Video: An unboxing and test video of the LEQISMART S11 Electric Scooter, demonstrating assembly and initial features.
2. 사용 설명서
Familiarize yourself with the scooter's controls and operating modes for a safe and enjoyable ride.
2.1 Powering On/Off and Headlight Control
Press and hold the power button (located on the display unit) to turn the scooter on or off. Double-press the power button to toggle the LED headlight on or off. The headlight is adjustable to direct illumination as needed.
Image: The scooter's display panel illustrating the three available speed modes (10km/h, 20km/h, 25km/h).
2.2가지 속도 모드
The scooter features three distinct speed modes, which can be cycled through by pressing the 'M' (Mode) button on the display unit:
- 모드 1 (저속): Approximately 6 MPH (10 km/h). Ideal for beginners or crowded areas.
- 모드 2 (중간 속도): Approximately 12 MPH (20 km/h). Suitable for general riding.
- 모드 3 (고속): Approximately 15.5 MPH (25 km/h). For experienced riders on open paths.
The current speed and battery level are displayed on the LED screen.
2.3 가속 및 제동
The scooter uses a non-zero start mechanism for safety. To engage the motor, push off with your foot to gain a slight initial speed, then press the thumb throttle on the right handlebar. The scooter is equipped with a dual braking system for effective stopping:
- 전자 브레이크: Activated by the brake lever on the left handlebar.
- 드럼 브레이크: A mechanical brake located on the rear wheel, also activated by the left brake lever.
Image: Close-up of the scooter's 8.5-inch pneumatic tires and the dual braking system for enhanced stability and safety.
Video: A detailed instructional video on operating the LEQISMART Electric Scooter, including controls and riding tips.
3. 유지관리
Regular maintenance ensures the longevity and optimal performance of your LEQISMART S11 Electric Scooter.
3.1 배터리 관리
The scooter is equipped with a 270Wh lithium-ion battery. To maximize battery life:
- 처음 사용하기 전에 완전히 충전하십시오.
- Avoid completely draining the battery. Recharge when the battery indicator shows low power.
- Store the scooter in a cool, dry place when not in use, and ensure it has some charge.
이미지: 상세 view of the scooter's integrated battery system.
3.2 타이어 유지 관리
The 8.5-inch pneumatic tires require regular pressure checks. Maintain appropriate tire pressure for optimal ride comfort and range. Refer to the tire sidewall for recommended PSI. Regularly inspect tires for wear and tear or punctures.
3.3 일반 청소 및 보관
광고로 스쿠터를 닦으세요amp cloth after use. Avoid using excessive water or high-pressure sprays. Store the scooter in a dry environment, away from direct sunlight and extreme temperatures. The foldable design allows for easy storage.
4. 문제 해결
이 섹션에서는 스쿠터를 사용하면서 발생할 수 있는 일반적인 문제에 대해 설명합니다.
4.1 스쿠터 전원이 켜지지 않음
- 배터리가 충전되었는지 확인하십시오. 충전기를 연결하고 표시등을 확인하십시오.
- Verify that the power button is pressed and held correctly.
4.2 주행 가능 거리 또는 속도 감소
- 타이어 공기압을 점검하세요. 공기압이 부족한 타이어는 주행 가능 거리와 속도를 크게 떨어뜨릴 수 있습니다.
- Riding habits and terrain (e.g., frequent uphill climbs, heavy rider weight) can affect performance.
- 배터리가 완전히 충전되었는지 확인하십시오.
4.3 오류 코드
If an error code appears on the display, consult the full user manual for specific code meanings and troubleshooting steps. Common codes may indicate motor, battery, or sensor issues.
5. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 레퀴스마트 |
| 모델명 | S11 |
| 모터 파워 | 350W 무브러시 모터 |
| 최대 속도 | 시속 15.5마일(25km/h) |
| 배터리 용량 | 270Wh 리튬 이온 배터리 |
| 최대 거리 범위 | 12-17 Miles (depending on riding habits and terrain) |
| 충전 시간 | 4.5시간 |
| 타이어 종류 | 8.5인치 공기 타이어 |
| 브레이크 시스템 | Dual Brake System (Electronic & Drum Brake) |
| 중량 제한 | 220 파운드 |
| 품목 무게 | 29.32 파운드 |
| 프레임 소재 | 알류미늄 |
| 특별 기능 | Foldable & Portable, Bright Headlight & Rear Light, Three Gear Modes |
Image: The LEQISMART S11 Electric Scooter with its core specifications highlighted.
6. 보증 및 지원
6.1 보증 정보
The LEQISMART S11 Electric Scooter comes with a 2-year manufacturer's limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the full user manual or contact customer support.
6.2 고객 지원
For technical support, troubleshooting assistance, or warranty inquiries, please contact LEQISMART customer service. Contact information can typically be found in the full user manual or on the official LEQISMART web대지.