소개
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Keychron V5 Wired Custom Mechanical Keyboard. The Keychron V5 is a 96% layout keyboard featuring QMK/VIA programmability, hot-swappable switches, double-shot PBT keycaps, and compatibility with macOS, Windows, and Linux systems.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Keychron V5 유선 맞춤형 기계식 키보드
- USB-C to USB-C 케이블
- USB-A to USB-C 어댑터
- 키캡 풀러
- 스위치 풀러
- Additional Keycaps for Windows/macOS
설정
키보드 연결
To connect your Keychron V5 keyboard:
- 키보드 뒷면에서 USB-C 포트를 찾으세요.
- Connect one end of the provided USB-C to USB-C cable to the keyboard.
- Connect the other end of the cable to a USB-C port on your computer. If your computer only has USB-A ports, use the provided USB-A to USB-C adapter.
- 키보드는 운영 체제에서 자동으로 인식됩니다.
System Toggle (Mac/Windows)
The Keychron V5 includes a system toggle switch to ensure full compatibility with both macOS and Windows operating systems. This switch is typically located on the back or side of the keyboard.
운영 체제를 전환하려면:
- Locate the 'Win/Mac' toggle switch.
- Slide the switch to the 'Mac' position for macOS or 'Win' position for Windows.
- The keyboard will adjust its key mappings accordingly.
이미지: 측면 view of the Keychron V5 keyboard, highlighting the system toggle switch and USB-C port for system compatibility.
Ergonomic Angle Adjustment
The keyboard features adjustable feet to customize the typing angle for improved ergonomics.
To adjust the typing angle:
- 키보드를 뒤집으면 밑면에 있는 받침대를 사용할 수 있습니다.
- Gently pull out the feet to extend them to your desired angle. There are usually two levels of adjustment.
Image: The Keychron V5 keyboard with its adjustable feet extended, demonstrating the ergonomic angle design.
작동 지침
주요 기능 및 레이아웃
The Keychron V5 features a 96% layout with 97 keys, efficiently retaining function keys and a num pad while saving desk space. The keyboard comes with pre-installed double-shot PBT keycaps in an OSA profile, designed for a comfortable fingertip feel and excellent oil resistance.
이미지: 완전한 view of the Keychron V5 keyboard, showcasing its 96% layout and keycap design.
QMK/VIA 맞춤형
The Keychron V5 supports QMK/VIA firmware, allowing for comprehensive customization of key mappings, macros, and backlight effects. VIA is a graphical user interface that simplifies the programming process.
키보드를 사용자 지정하려면 :
- Keychron 공식 웹사이트에서 VIA 소프트웨어를 다운로드하세요. web사이트 또는 VIA GitHub 저장소.
- Connect your keyboard to your computer.
- Launch the VIA software. The software should automatically detect your Keychron V5.
- Use the intuitive interface to remap keys, create macros, and adjust lighting settings across multiple layers.
For detailed instructions on using QMK/VIA, refer to the official Keychron documentation or community guides.
Image: A visual representation of the VIA software interface, demonstrating how users can customize key layouts and macros for the Keychron V5.
프로그래밍 가능한 노브
The Keychron V5 features a programmable rotary knob, which can be customized via QMK/VIA to control various functions such as volume, zoom, or scrolling.
To customize the knob's function:
- Open the VIA software.
- Navigate to the knob customization section.
- Assign desired functions for clockwise rotation, counter-clockwise rotation, and pressing the knob.
이미지: 클로즈업 view of the programmable rotary knob on the Keychron V5 keyboard, highlighting its textured surface.
핫 스왑 가능한 스위치
The Keychron V5 is equipped with hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches (e.g., Cherry, Gateron, Kailh, Panda).
The keyboard comes with pre-lubed K Pro Red linear switches, offering a smooth and responsive typing experience with a lifespan of up to 50 million keystrokes.
이미지: 자세한 view of the hot-swappable mechanical switches on the Keychron V5 keyboard, illuminated by RGB backlighting.
백라이트
The V5 features south-facing RGB backlighting, designed to better illuminate the keyboard from the typist's angle and prevent interference when using Cherry-profile keycaps. You can customize the backlight effects and colors using the VIA software.
Image: A close-up of the double-shot PBT keycaps on the Keychron V5 keyboard, showcasing their texture and legends.
유지
청소
키보드의 청결과 수명을 유지하려면 다음 사항을 준수하십시오.
- 키캡: 키캡 리무버를 사용하여 키캡을 제거하세요. 순한 비누 용액과 부드러운 천으로 키캡을 닦은 후, 헹구고 완전히 말린 후 다시 부착하세요.
- 키보드 본체: 키보드 본체를 부드러운 천으로 닦으세요.amp 옷감. 가혹한 화학 물질이나 연마재를 사용하지 마십시오.
- 먼지: 압축 공기를 사용하여 키캡과 스위치 사이의 먼지와 이물질을 제거합니다.
스위치 교체
스위치를 교체하려면:
- 제공된 키캡 풀러를 사용하여 교체하려는 스위치에서 키캡을 조심스럽게 제거하십시오.
- Insert the switch puller tool around the top and bottom clips of the switch.
- 클립을 살짝 누른 후 스위치를 위쪽으로 똑바로 당겨 PCB에서 분리하십시오.
- 새 스위치의 핀을 PCB의 구멍에 맞춰 정렬하세요. 핀이 일직선이 되도록 하세요.
- Press the new switch firmly into place until it clicks. Ensure it is seated properly and not bent.
- 키캡을 다시 부착하세요.
키캡 교체
키캡을 교체하려면:
- 키캡 풀러를 사용하여 기존 키캡에 걸고 위쪽으로 당겨 부드럽게 제거하십시오.
- Align the new keycap with the cross-shaped stem of the switch.
- Press the new keycap firmly down until it is fully seated.
문제 해결
- 키보드가 응답하지 않음:
Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable. Verify the system toggle switch is set correctly for your operating system. - 키가 등록되지 않음:
If specific keys are not working, the switch might be faulty or not fully seated. Try removing and re-inserting the switch. If the issue persists, replace the switch. - 역광 문제:
Check VIA software settings to ensure backlighting is enabled and configured correctly. If only certain LEDs are not working, it might indicate a faulty LED or switch. - QMK/VIA Software Not Detecting Keyboard:
Ensure the keyboard is connected via USB. Close and reopen the VIA software. Make sure you have the correct firmware loaded if you have flashed custom firmware. - Keycaps Feel Loose:
Ensure keycaps are fully pressed onto the switch stems. If a keycap consistently feels loose, the switch stem might be damaged, or the keycap's cross-mount might be worn.
명세서
| 특징 | 사양 |
|---|---|
| 상표 | 키크론 |
| 모델 | V5 |
| 키보드 설명 | 기계적 |
| 키보드 레이아웃 | QWERTY, 96% Layout (97 Keys) |
| 연결 기술 | 유선(USB-C) |
| 호환 장치 | PC (macOS, Windows, Linux) |
| 스위치 유형 | Linear (K Pro Red) |
| Hot-swappable Support | Yes (3-pin and 5-pin MX mechanical switches) |
| 키캡 | 더블샷 PBT, OSA 프로file |
| 백라이트 | 남향 RGB |
| 인클로저 재료 | 폴리부틸렌 테레프탈레이트, 실리콘 |
| 추가 기능 | QMK/VIA Programmable, Programmable Knob, Screw-in Stabilizers |
보증 및 지원
Keychron products are typically covered by a limited warranty. For specific warranty terms, duration, and conditions, please refer to the warranty information provided with your product packaging or visit the official Keychron web대지.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Keychron customer service through their official website's support portal. When contacting support, please have your product model (Keychron V5) and purchase details ready.