OREiN LED Flood Light Outdoor Motion Sensor

1. 안전 정보

설치 및 작동 전에 모든 안전 지침을 주의 깊게 읽으십시오. 지침을 따르지 않으면 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

• Always turn off the power at the circuit breaker before installing or servicing the fixture.
• Installation must be performed by a qualified electrician or a person with knowledge of electrical wiring.
• 공급 볼륨을 확인tage is correct (120 Volts) before connecting the fixture.
• Do not attempt to modify the fixture. Any modifications may void the warranty and pose safety risks.
• This product is rated IP65 waterproof, suitable for outdoor use and resistant to dust and water jets. However, do not submerge the fixture in water.
• Avoid looking directly into the LED light source when the light is on, as it may cause eye strain or damage.

2. 제품 오버view

The OREiN LED Flood Light is an outdoor motion sensor security light designed for enhanced illumination and security around your home. It features a 450° wide adjustable design, allowing for flexible light direction, and offers three distinct operating modes to suit various needs.

Figure 2.1: OREiN LED Flood Light, showcasing its dual adjustable heads and integrated motion sensor.

주요 특징:

• 3가지 작동 모드: Security Mode, Day to Day Mode, and Manual Mode for versatile usage.
• 450° Wide Adjustable Lighting: Patented design with 3 active joints for flexible adjustment of light heads, preventing light pollution and illuminating awkward corners.
• Bright 5000K Spotlights: Equipped with 12W (150W equivalent) high power LEDs, providing 1600 lumens of 5000K daylight white light for wide and far coverage.
• Durable and IP65 Waterproof: Constructed with upgraded LEDs and high-density ABS material, ensuring performance in various weather conditions and a 50,000-hour lifetime.
• Enhanced Motion Sensor: Reliable motion detection for security and convenience.

상자 안에 무엇이 들어있나요?

• OREiN LED Flood Light Fixture
• LED Lens (integrated)
• 장착 하드웨어

3. 설치

The OREiN LED Flood Light is designed for hardwired installation and requires connection to a standard junction box (not included). It supports both wall mounting and soffit mounting.

설치 단계:

1. 장착 표면 준비: Ensure the power is off at the circuit breaker. Identify the location for installation, preferably a standard junction box.
2. 브래킷 고정: Secure the provided mounting bracket to the junction box or wall using the appropriate screws. The bracket dimensions are approximately 3.54 inches (9 cm) in diameter.
   

   Figure 3.1: Mounting bracket dimensions and attachment to a junction box.

3. 배선 연결: Connect the wires from the fixture to the corresponding wires in the junction box (e.g., black to black, white to white, ground to ground). Use wire nuts to secure connections.
   

   Figure 3.2: Wiring connections for hardwired installation.

4. 조명기구 설치: Align the fixture with the mounting bracket and secure it with screws. Ensure a tight and stable fit.
5. 라이트 헤드 조정: Once mounted, adjust the two light heads and the motion sensor to your desired angles. The fixture offers 450° of total adjustment.
   

   Figure 3.3: Flexible adjustment of light heads to avoid light pollution or illuminate specific areas.
   

   Figure 3.4: Soffit ceiling mount friendly design with no angle restrictions for the sensor.

6. 복원력 : 회로 차단기를 다시 켜세요.

4. 사용 설명서

The OREiN LED Flood Light features an integrated red button for mode selection and control. The motion sensor has a detection range of 6.4-40 feet.

Figure 4.1: Motion activated lighting with a detection range of 6.4-40 feet.

Red Button Setting Instructions:

1. 켜기/끄기: Long press the red button for 2 seconds to turn the light on or off.
2. 스위치 모드: Single click the red button to cycle through the three operating modes. Observe the light's behavior to identify the current mode:
   • 보안 모드: The light flashes twice slowly. In this mode, the motion sensor turns on the light to 100% brightness when motion is detected, and turns off when no motion is detected.
     

     Figure 4.2: Security Mode operation (100% brightness on motion).

   • Day to Day Mode: The light flashes twice quickly. In this mode, the light stays at 30% brightness when no motion is detected and switches to 100% brightness upon detecting motion.
     

     Figure 4.3: Day to Day Mode operation (30% brightness, 100% on motion).
   • 수동 모드: The light is fixed (no flashes). In this mode, the light turns on at night and stays on all night, controlled by a manual switch.
     

     Figure 4.4: Manual Mode operation (controlled by external switch).

3. 재설정 : Long press the red button for 10 seconds to reset the light to its default settings.
   

   Figure 4.5: Red button functions for On/Off, Mode Switching, and Reset.

조명 방향 조정:

The flood light features multiple adjustable joints on its light arms, allowing you to precisely direct the light where needed. This flexibility helps in avoiding light pollution to neighbors or illuminating specific areas like walkways or blind corners.

Figure 4.6: Adjustable joints for precise light direction.

5. 유지관리

The OREiN LED Flood Light is designed for long-lasting performance with minimal maintenance. Its IP65 rating ensures protection against dust and water.

Figure 5.1: IP65 Waterproof design, suitable for various weather conditions.

• 청소: 주기적으로 부드러운 천으로 조명기구를 닦아주세요.amp 천으로 먼지와 이물질을 제거하세요. 연마성 세제나 용제는 사용하지 마세요.
• 점검: Regularly check the mounting and wiring for any signs of wear or damage. Ensure all connections remain secure.
• 내구성: The fixture is built with high-density ABS material and upgraded LEDs, designed to resist heat, rust, and extreme weather, ensuring a long lifespan of approximately 50,000 hours.

6. 문제 해결

If you encounter issues with your OREiN LED Flood Light, refer to the following common problems and solutions:

7. 사양

8. 보증 및 지원

OREiN stands behind the quality of its products. Your LED Flood Light comes with a comprehensive warranty and dedicated customer support.

• 보증: 이 제품은 24개월 보증 구매일로부터.
• 고객 지원: For any questions, issues, or warranty claims, please contact OREiN customer service.
  • 온라인: Contact us directly on Amazon.
  • 일반 문의: 검색 "OREiN" online to find our official contact information.
• 반품 정책: Items purchased through Amazon can be returned via Amazon's logistics. We recommend contacting us before initiating a return for potential troubleshooting or assistance.

OREiN products are certified by FCC, CE, and ROSH, ensuring high quality standards and safety.