3NH TMC-D6000 디지털 온도 조절기 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the 3NH TMC-D6000 Digital Thermostat Temperature Controller. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. 제품 오버view

The 3NH TMC-D6000 is a versatile digital temperature controller designed for precise temperature management in various applications. It features dual-circuit monitoring, allowing for independent or synchronized control of two temperature zones. The clear LED display provides real-time temperature readings, and intuitive button controls facilitate easy setup and adjustment.

Image: The 3NH TMC-D6000 digital thermostat unit, white with a black faceplate. It features two red LED displays showing temperature readings, labeled '1' and '2', indicating dual-circuit capability. Below the displays are control buttons: 'RF', 'ON/OFF ESC', 'SET', and up/down arrow buttons. Two black temperature probes with metallic tips are coiled next to the main unit.

3. 주요 특징

• 디지털 LED 디스플레이: Clear and easy-to-read temperature indicators.
• Single/Dual Circuit Control: Capable of managing one or two independent temperature zones.
• Button Control Interface: Simple and direct interaction for settings adjustment.
• 백라이트 기능: 어두운 환경에서의 시야 확보가 향상되었습니다.
• Precise Temperature Monitoring: Ensures accurate temperature regulation.

4. 패키지 내용

• 3NH TMC-D6000 Digital Thermostat Temperature Controller Unit
• 온도 프로브(x2)
• 사용자 설명서

5. 안전 정보

• Ensure the device is connected to a power source that matches its voltag요구사항
• Do not expose the controller unit to water or excessive moisture.
• Handle temperature probes carefully to avoid damage to the sensor tip or cable.
• 장치를 가연성 물질 가까이에 두지 마십시오.
• Do not attempt to open or repair the unit yourself. Contact qualified personnel for service.

6. 설정

6.1. 배치

Place the controller unit in a stable, dry location away from direct sunlight, heat sources, or excessive vibrations. Ensure adequate ventilation around the unit.

6.2. Connecting Temperature Probes

1. Locate the probe input ports on the controller unit.
2. Carefully insert the connectors of the temperature probes into the corresponding ports. Ensure a secure connection.
3. Position the probe tips in the areas where temperature monitoring or control is required.

6.3. 전원 연결

Connect the power cable to the controller unit and then plug it into a suitable power outlet. The unit will power on automatically or can be turned on using the ON/OFF button.

7. 사용 설명서

7.1. 전원 켜기/끄기

를 누르세요 ON/OFF ESC 버튼을 눌러 장치를 켜거나 끌 수 있습니다.

7.2. 설정 온도

1. 를 누르세요 세트 button to enter the temperature setting mode. The display will flash.
2. 사용하세요 위로(▲) 그리고 아래로(▼) arrow buttons to adjust the desired temperature value.
3. 누르다 세트 again to confirm the setting and exit the setting mode. If no button is pressed for a few seconds, the device will automatically exit the setting mode.

7.3. Dual-Circuit Operation

The TMC-D6000 can monitor and control two independent temperature circuits. The displays labeled '1' and '2' correspond to the respective probes. Settings for each circuit can be adjusted independently or linked depending on the specific operational mode (refer to advanced settings in a comprehensive manual if available).

8. 유지관리

8.1. 청소

Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.

8.2. 프로브 관리

Inspect temperature probes regularly for any signs of damage or wear. Keep the probe tips clean and free from debris that could affect accuracy.

9. 문제 해결

• 장치 전원이 켜지지 않음: 전원 연결을 확인하고 전원 콘센트가 제대로 작동하는지 확인하십시오.
• 잘못된 온도 측정값: Verify that probes are correctly connected and positioned. Ensure probes are not damaged.
• 온도가 변하지 않음: Check set temperature values and ensure the control output is functioning (if applicable to your model's wiring).

문제가 지속되는 경우 고객 지원팀에 문의하세요.

10. 사양

11. 보증 및 지원

For warranty information or technical support, please refer to the product packaging or contact your retailer/manufacturer directly. Keep your purchase receipt for warranty claims.