ASUS ROG Herculx XH01 그래픽 카드 처짐 방지 홀더 브래킷 사용 설명서

소개

The ASUS ROG Herculx XH01 is designed to provide structural support for graphics cards, preventing sag. It features a solid zinc alloy construction, toolless installation, precision height adjustment, and customizable Aura Sync RGB lighting. This manual provides instructions for proper setup and use.

패키지 내용

• ROG Herculx Graphics Card Anti-Sag Holder Bracket

특징

• Stand design compatible with various chassis, does not occupy PCIe slots.
• Adjustable support height from 72 mm to 128 mm.
• Toolless setup and removal via an adjustable wheel and release button.
• Integrated spirit level for simplified installation.
• Embedded 3D ARGB element compatible with Aura Sync for customizable lighting.

설정 및 설치

Follow these steps to install your ROG Herculx Graphics Card Anti-Sag Holder Bracket:

1. Positioning the Bracket: Place the Herculx bracket on the bottom of your PC case, directly beneath the graphics card. Ensure it is on a stable surface within the chassis.

   Image: The ASUS ROG Herculx bracket shown with its packaging, illustrating its compact design before installation.
2. 높이 조정(초기): Use the release button to quickly extend the support arm to approximately the height of your graphics card.

   Image: A close-up of the ROG Herculx bracket highlighting the adjustable wheel and release button for toolless height adjustment.

3. Fine-Tuning Height: Rotate the adjustable wheel to precisely fine-tune the height until the support arm makes firm, but not excessive, contact with the underside of your graphics card. The support height ranges from 72 mm to 128 mm.

   Image: The ROG Herculx bracket installed in a PC case, supporting a graphics card. This image demonstrates the bracket's function in preventing GPU sag.

4. Using the Spirit Level: Utilize the included spirit level to ensure your graphics card is perfectly horizontal. Adjust the bracket's height as needed for optimal alignment.

   Image: The ROG Herculx bracket displaying its integrated spirit level, used to ensure precise horizontal alignment of the graphics card.
5. Connecting ARGB (Optional): If desired, connect the ARGB cable from the Herculx bracket to an available addressable RGB header on your motherboard.

   Image: The ROG Herculx bracket with its 3D ARGB element illuminated, showcasing customizable lighting effects.

작업

The primary function of the ROG Herculx bracket is to provide stable support for your graphics card. Once installed and adjusted, it operates passively.

Aura Sync RGB 조명

If connected to an ARGB header, the embedded 3D ARGB element can be customized and synchronized with other ASUS components via the ASUS Armoury Crate software. Refer to your motherboard's manual or ASUS support for detailed instructions on using Armoury Crate.

유지

• 청소: Periodically clean the bracket with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the device.
• 점검: Occasionally check the bracket's position and height adjustment to ensure it maintains proper support for the graphics card.
• 환경 조건: Ensure the PC case environment is free from excessive dust and moisture to prolong the life of all internal components, including the bracket.

문제 해결

• Bracket Not Supporting GPU: Ensure the adjustable wheel is tightened sufficiently and the support arm is making firm contact with the graphics card. Re-adjust the height if necessary.
• RGB 조명이 작동하지 않음: Verify that the ARGB cable is securely connected to an addressable RGB header on your motherboard. Check the ASUS Armoury Crate software for lighting settings and ensure the bracket is detected. Confirm that the motherboard's ARGB header is enabled in the BIOS/UEFI if applicable.
• 대진표 불안정성: Ensure the bracket is placed on a flat, stable surface within the PC case.

명세서

보증 및 지원

보증 정보는 ASUS 공식 웹사이트를 참조하십시오. website or the documentation included with your purchase. For technical support, visit the ASUS Brand Store or contact ASUS customer service.

A digital version of the user guide may also be available: 사용 설명서 (PDF)