Feit Electric LED Outdoor Security Flood Light (Model S9DFL/850/MOT/WH) User Manual

소개

Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

이미지: 앞면 view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.

안전 정보

경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈 또는 회로 차단기에서 전원을 차단하십시오. 부적절한 배선은 감전이나 화재를 유발할 수 있습니다.

• 모든 전기 연결은 지역 및 국가 전기 규정(NEC) 표준을 따라야 합니다.
• 배선 절차에 대해 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하세요.
• 가연성 물질 근처 또는 폭발성 분위기가 있는 지역에 설치하지 마십시오.
• Ensure the fixture is securely mounted to a structural surface.
• This fixture is rated for outdoor wet locations (IP65).

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• LED Outdoor Security Flood Light Fixture
• 장착 하드웨어(나사, 와이어 너트)
• 틈 메우는 물건
• 사용 설명서

Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.

명세서

Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.

설치 지침

1. 설치 준비

1. 전원 끄기: 회로 차단기 또는 퓨즈 박스를 찾아 조명 기구가 설치될 접속함으로 가는 전원을 차단하십시오.
2. 해당 지역을 비우세요: Ensure the installation area is clear of obstructions and provides stable support for the fixture.

2. 고정장치 장착

The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.

1. Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
2. 접속함에서 나온 전선을 장착판 중앙 구멍을 통해 빼내십시오.
3. Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.

Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.

3. 배선 연결

Connect the fixture wires to the household wiring using the provided wire nuts:

• 연결하다 검은색 고정물에서 전선까지 검은색 접속함에서 나오는 (활선) 전선.
• 연결하다 하얀색 고정물에서 전선까지 하얀색 접속함에서 나오는 (중성) 전선.
• 연결하다 녹색 조명기구에서 나오는 (접지) 전선 녹색 또는 접속함에서 나오는 노출된 구리(접지) 전선.
• 모든 연결부가 단단히 고정되고 전선 너트로 절연되었는지 확인하십시오.

4. Secure the Fixture

Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.

이미지: 측면 view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.

작동 지침

1. 전원 켜기 및 초기 테스트

After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.

2. 모션 센서 기능

The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).

Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.

3. 일몰부터 일출까지 기능

The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.

Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.

4. Adjusting Light Heads and Sensor

The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.

유지

• 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드러운 천으로 조명 기구를 닦으십시오.amp 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재나 전기 부품이 손상될 수 있습니다.
• 점검: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
• LED : 내장형 LED는 수명이 길도록 설계되었으며 사용자가 교체할 수 없습니다.

Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.

문제 해결

보증

This Feit Electric product is warranted to be free from defects in workmanship and materials for 5년 from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.

지원하다

For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric web최신 연락처 정보는 사이트에서 확인하세요.

피트 일렉트릭 Web대지: www.feit.com