DEWALT 20V MAX Cordless Pruning Shears DCPR320B Instruction Manual

중요 안전 지침

경고: 이 전동 공구와 함께 제공된 모든 안전 경고, 지침, 그림 및 사양을 읽으십시오. 아래에 나열된 모든 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.

• Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear, when operating the pruning shears.
• Keep hands and body parts clear of the cutting blades at all times. The blades are sharp and move quickly.
• 작업 구역에 주변 사람, 특히 어린이와 애완동물이 없는지 확인하세요.
• Do not operate the tool in wet conditions or expose it to rain. Water entering a power tool will increase the risk of electric shock.
• Use only DEWALT 20V MAX batteries with this tool.
• Before performing any maintenance, cleaning, or blade changes, always remove the battery pack from the tool.
• 이 제품에는 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다. 취급 후에는 손을 씻으십시오.

Image: DEWALT 20V MAX Pruning Shears showing warning labels on the tool body.

제품 끝view

The DEWALT 20V MAX Cordless Pruning Shears (DCPR320B) are designed for efficient cutting of branches, bushes, and thick stems up to 1-1/2 inches in diameter. This tool features non-stick coated blades for smooth cuts, an on-board LED work light for improved visibility, and a comfortable grip for extended use. This is a bare tool only; battery and charger are sold separately.

이미지: 앞면 view of the DEWALT 20V MAX Pruning Shears, highlighting the blades and handle.

설정

배터리 설치

1. Ensure the tool is turned off and the safety switch is engaged.
2. 배터리 팩을 가지치기 손잡이 아래쪽의 배터리 포트에 맞춥니다.
3. 배터리 팩을 포트에 딸깍 소리가 나며 단단히 고정될 때까지 밀어 넣습니다.
4. 배터리를 제거하려면 배터리 팩의 분리 버튼을 누르고 밀어서 빼냅니다.

블레이드 검사

• 사용하기 전에 매번 칼날에 손상, 무뎌짐 또는 이물질이 있는지 검사하십시오.
• Ensure the blades are clean and free of sap or residue for optimal cutting performance.

작동 지침

전원 켜기/끄기

1. To power on the pruner, ensure a charged 20V MAX battery is installed.
2. Locate the safety switch (typically a trigger lock or button) and disengage it.
3. Press the main trigger to activate the blades. The blades will open and close with each press.
4. To power off, release the trigger and engage the safety switch.

절단 절차

• Position the branch or stem to be cut fully within the jaws of the pruner.
• Ensure the branch is perpendicular to the blades for a clean cut.
• Press the trigger firmly to initiate the cut. The non-stick coated blades are designed for smooth operation.
• The tool can cut branches up to 1-1/2 inches in diameter. For thicker branches, multiple presses may be required, or consider using a different tool.
• The integrated LED light will illuminate the cutting area, improving visibility in dimly lit conditions.

Image: A person using the DEWALT Pruning Shears to cut a branch from a tree.

Image: A person using the DEWALT Pruning Shears to trim a bush.

공식 제품 영상

유지

블레이드 청소

• 사용 후에는 배터리 팩을 제거하세요.
• Clean the blades with a damp cloth to remove sap, dirt, and debris. A mild detergent can be used if necessary.
• Dry the blades thoroughly to prevent rust.
• Apply a light coat of oil to the blades for protection and smooth operation.

블레이드 교체

• When blades become dull or damaged, they can be replaced. The tool includes a change tool (often an Allen key) for this purpose.
• Refer to the detailed instructions in the full product manual for specific blade replacement steps.
• Replacement blades are available from authorized DEWALT dealers.

저장

• Store the pruner in a dry, secure location out of reach of children.
• 장기간 보관할 경우 항상 배터리 팩을 분리하십시오.
• Keep the blades closed and protected when not in use.

문제 해결

• 도구가 전원이 켜지지 않습니다: Ensure the battery is fully charged and properly inserted. Check if the safety switch is disengaged.
• Blades not cutting cleanly: Inspect blades for dullness or damage. Clean blades of any accumulated sap or debris. Consider replacing blades if they are worn.
• Tool stops working unexpectedly: Remove the battery and inspect for any visible damage or moisture. This tool is not designed for use in wet conditions; exposure to rain can cause malfunction. Allow the tool to dry completely if it has been exposed to moisture, and if issues persist, contact customer support.
• Reduced cutting power: Ensure the battery is fully charged. For very thick branches, the tool may require multiple trigger presses or may be exceeding its maximum cutting capacity.

명세서

보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official DEWALT website. DEWALT products are manufactured by Stanley Black & Decker. Contact their customer service for assistance with product issues, parts, or service.

제조업체: 스탠리 블랙앤데커

Web대지: www.dewalt.com