Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

1. 서론

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. 안전 정보

• 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
• 설치는 국가 및 지역 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
• 조명기구를 개조하거나 변경하지 마십시오.
• 공급 볼륨을 확인tage는 조명기구의 요구 사항(120볼트)과 호환됩니다.
• Do not handle live wires with bare hands.
• 이 제품은 Damp 평가됨, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. 상자 안에 무엇이 들어있나요?

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

• LED Disc Light Fixture (12 units per pack)
• TP24 커넥터
• E26 어댑터
• Spring Clips (pre-attached or included for installation)
• 와이어 너트
• 장착 나사
• 사용 설명서

4. 설치 지침

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. 필요한 도구

• 드라이버
• Wire Strippers (if connecting to junction box)
• 안전 안경

4.2. Recessed Can Installation (5-inch or 6-inch)

1. 전원 끄기: Ensure power to the fixture is OFF at the circuit breaker.
2. Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
3. Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
4. Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
5. Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
6. Insert fixture: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

4.3. Junction Box Installation

1. 전원 끄기: Ensure power to the junction box is OFF at the circuit breaker.
2. 전선을 준비하세요: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
3. 전선을 연결하십시오: Use the provided wire nuts to connect the corresponding wires:
   • Black fixture wire to Black junction box wire.
   • White fixture wire to White junction box wire.
   • Green/Yellow fixture wire to Green/Bare Copper junction box wire.
4. 고정 장치: Use the provided mounting screws to attach the disc light's base directly to the junction box.
5. Attach diffuser: Twist the diffuser onto the fixture base until securely fastened.

5. 사용 설명서

5.1. 전원 켜기/끄기

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Selectable Color Temperature (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

5.3. 디밍 기능

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

호환 조광기:

6. 유지관리

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

• 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드러운 천으로 조명 기구를 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 전구 교체: 이 조명기구는 LED가 내장되어 있어 전구를 교체할 필요가 없습니다.

7. 문제 해결

8. 사양

9. 보증 및 지원

Sunco Lighting은 다음과 같은 제품을 제공합니다. 7년 보호 warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Sunco Lighting Store 자세한 내용은.