에버브라이트 충전식 LED 헤드라이트amp 모션 센서 포함 - 사용자 설명서

1. 제품 오버view

The EverBrite Rechargeable LED Headlamp is a versatile lighting device designed for various activities such as hiking, running, camping, and general tasks. It features multiple lighting modes, a motion sensor for hands-free operation, and a rechargeable battery.

Image 1.1: The EverBrite headlamp, illustrating its main features including the light, headband, USB charging cable, and motion sensor functionality.

2. 패키지 내용

• 1 x EverBrite Rechargeable LED Headlamp
• 1 x 마이크로 USB 충전 케이블
• 1 x 리튬 이온 배터리(사전 설치됨)

3. 주요 특징

• 충전식 배터리: Equipped with a 1200mAh lithium battery and Micro-USB charging.
• 9가지 조명 모드: Includes XPE, COB, XPE+COB, Red Beam, and SOS Red Strobe in key light mode, plus XPE, COB, XPE+COB, and Red Beam in motion sensor mode.
• 모션 센서: Allows hands-free operation to turn the light on/off with a wave of the hand.
• 가볍고 내구성이 뛰어납니다: Constructed from ABS hard rubber, weighing approximately 0.17 lbs (80g).
• 조정 가능한 머리띠: Elastic headband fits head circumferences from 15.7" (40cm) to 31.5" (80cm).
• 조정 가능한 각도: 헤드amp can be tilted up to 45 degrees.
• 내열성: Operates effectively in temperatures from -4℉ (-20℃) to 140℉ (60℃).

4. 설정

4.1 헤드 충전amp

1. 헤드에서 Micro-USB 충전 포트를 찾으세요amp.
2. Connect the provided Micro-USB cable to the headlamp and the other end to a 5V 1A USB charger (not included), power bank, or computer USB socket.
3. The power indicator lights will show the charging status. One light flashing indicates charging, and four solid lights indicate a full charge.
4. 헤드 플러그를 뽑으세요amp promptly after charging is complete to preserve battery life.

중요한: Do not turn on the light while the headlamp 충전 중입니다.

이미지 4.1: 머리 부분의 삽화amp's Micro-USB charging port and battery indicator lights, demonstrating connection to a power source.

4.2 헤드밴드 조정

1. 헤드를 배치하세요amp 당신의 머리에.
2. Adjust the elastic headband to a comfortable fit. The band is designed to adapt to various head sizes (15.7"-31.5" / 40-80cm).
3. 헤드를 확인하십시오amp is secure but not too tight to avoid discomfort during prolonged use.

Image 4.2: The adjustable and breathable headband of the EverBrite headlamp, shown being worn by individuals.

5. 사용 설명서

5.1 Power On/Off and Mode Selection (Key Light Mode)

1. 전원 버튼을 한 번 눌러 헤드를 켜세요amp.
2. Within 5 seconds of turning on, press the power button repeatedly to cycle through the following modes: XPE Mode (300 Lm) > COB Mode (300 Lm) > XPE+COB Mode (500 Lm) > 레드 빔 > SOS Red Strobe.
3. If the light has been on for more than 5 seconds in any mode, a single press of the power button will turn the light off directly, without cycling through all modes.

Image 5.1: Visual representation of the headlamp's various lighting modes and their respective lumen outputs.

5.2 모션 센서 모드

1. To activate motion sensor mode, press the dedicated motion sensor button (usually indicated by a wave icon or distinct from the main power button). A red indicator light will illuminate.
2. Once activated, wave your hand within approximately 15 cm (6 inches) of the sensor to turn the light ON or OFF.
3. In motion sensor mode, you can cycle through 엑스피, 옥수수 속, XPE+COB, 그리고 레드 빔 by pressing the main power button.
4. To exit motion sensor mode, press the motion sensor button again.

Image 5.2: Demonstration of the motion sensor feature, showing how to activate it and use hand gestures to control the light.

5.3 각도 조정

머리amp unit can be tilted up to 45 degrees to direct the light precisely where needed. Gently push or pull the light housing to adjust its angle.

이미지 5.3: 헤드amp's adjustable angle mechanism, allowing users to direct the light beam.

6. 유지관리

6.1 청소

• 헤드를 닦아주세요amp 부드럽고 d 재질의 몸체amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• The headband is removable for easy washing. Hand wash with mild soap and water, then air dry completely before reattaching.

6.2 보관

• 헤드를 저장하세요amp 직사광선을 피해 서늘하고 건조한 곳에 보관하십시오.
• For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

7. 문제 해결

• 헤드amp 켜지지 않습니다:
  - Ensure the battery is charged. Connect to a power source and check the charging indicator lights.
  - Verify the power button is pressed correctly.
• 짧은 배터리 수명:
  - Ensure the headlamp is fully charged before use. Charging time is typically 2-3 hours.
  - Battery performance can decrease over time with repeated charge cycles.
• 불빛이 깜빡거립니다:
  - This could indicate a low battery. Recharge the headlamp.
  - If flickering persists after charging, contact customer support.
• 동작 센서가 반응하지 않습니다:
  - Ensure motion sensor mode is activated (red indicator light is on).
  - Wave your hand within the optimal sensing distance (approx. 15 cm).
  - Clean the sensor area to remove any obstructions.

8. 사양

9. 보증 및 지원

9.1 보증 정보

This EverBrite headlamp 와 함께 제공됩니다 2년 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 조건에서 발생하는 제조상의 결함 및 불량에 적용됩니다. 단, 오용, 사고, 무단 개조 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다.

9.2 고객 지원

For technical assistance, warranty claims, or any questions regarding your EverBrite headlamp, please contact our customer support team:

• 이메일: support@everbrite.com (Examp르)
• 핸드폰: 1-800-XXX-XXXX (구amp르)
• Web대지: Visit the EverBrite Store on Amazon

Please have your model number (E021047AU) and proof of purchase ready when contacting support.