RadioMaster TX16S Mark II User Manual

1. 서론

Welcome to the user manual for your RadioMaster TX16S Mark II 2.4GHz 16 Channel EdgeTX Radio Transmitter. This manual provides essential information for the safe and effective operation, setup, and maintenance of your new radio transmitter. Please read this manual thoroughly before using the device.

2. 안전 정보

Always operate your radio transmitter responsibly and in accordance with local laws and regulations. Failure to do so may result in damage to property, serious injury, or death.

• 배터리 안전: Use only recommended battery types. Do not overcharge or over-discharge batteries. Store batteries in a safe, fireproof location.
• 환경 조건: Avoid operating the transmitter in extreme temperatures, high humidity, or dusty environments.
• 간섭: Be aware of potential radio interference from other devices. Always perform a range check before flight.
• 프로펠러 안전: Always remove propellers from your aircraft when performing setup or maintenance to prevent accidental injury.
• 감독: Children should only operate the transmitter under direct adult supervision.

3. 제품 오버view

The RadioMaster TX16S Mark II is a versatile 16-channel radio transmitter designed for various RC applications. It features a full-color touchscreen display and supports multiple protocols.

3.1 정면 View

그림 3.1: 전면 view of the TX16S Mark II, showing the gimbals, switches, and touchscreen display.

3.2 후면 View

그림 3.2: 후면 view of the TX16S Mark II, highlighting the battery compartment and ergonomic grips.

3.3 주요 특징

• 내부 회로 개선 및 전원 공급 장치 최적화.
• Newly designed removable battery cover.
• Raised and flat grips for enhanced ergonomics.
• Improved S1/S2 knobs with center detents.
• 4.3-inch IPS Color Display with adjustable brightness.
• New 3.5mm audio headphone jack and built-in dual speakers.
• External Module Bay supporting Team Black Sheep MicroTX modules in CRSF mode with LUA scripts.
• Internal 4-in-1 Multi-protocol module for switching between internal RF and Crossfire via software.
• Supports EdgeTX and OpenTX firmware (EdgeTX installed by default).

3.4 상세 Views

Figure 3.3: The TX16S Mark II fits securely within its protective case.

Figure 3.4: The transmitter supports both EdgeTX and OpenTX firmware, offering flexibility in configuration.

Figure 3.5: Detail of the new V4.0 Hall Gimbals, which are adjustable without disassembly, ranging from 38° to 54°.

Figure 3.6: The improved S1/S2 knobs feature center detents for precise control, complemented by the vibrant 4.3-inch IPS color display for easy programming.

Figure 3.7: An updated design includes an improved LS/RS slider with tactile center detents for better feedback.

Figure 3.8: New features include a 3.5mm audio jack for headphones, an easily removable battery cover, and a DIY accessory socket for customization.

Figure 3.9: Connectivity options include a UART Port, Charging Port (USB-C), and an SD Card Slot for updates and storage.

4. 설정

4.1 배터리 설치

The TX16S Mark II requires 18650 cells (not included) for operation. Insert the batteries into the battery tray, ensuring correct polarity. Then, slide the battery tray into the compartment at the rear of the transmitter and secure the newly designed removable battery cover.

4.2 펌웨어 업데이트

The radio firmware (EdgeTX) and module firmware (Multiprotocol or ExpressLRS) can be updated. Updates are supported via USB-C online or offline using an SD card. Refer to the official RadioMaster website or EdgeTX documentation for the latest firmware and detailed update procedures.

4.3 Binding to Aircraft

To bind your TX16S Mark II to an aircraft, navigate to the 'Model Setup' menu on the touchscreen display. Select the appropriate RF Protocol for your receiver (e.g., Multi-Protocol or ELRS). Ensure the aircraft's receiver is in binding mode, then select the 'Bind' option on the transmitter. The transmitter will attempt to connect to the receiver. Successful binding is typically indicated by a solid light on the receiver.

5. 운영

5.1 디스플레이 탐색

The 4.3-inch TFT full-color touch display allows for intuitive navigation. Use the touchscreen to access menus, adjust settings, and monitor telemetry data. The S1/S2 knobs and LS/RS sliders provide additional tactile control for various functions.

5.2 모델 설정 및 구성

The EdgeTX firmware offers extensive customization options for your models. Within the 'Model Setup' menu, you can configure:

• 입력: Define and assign control inputs from gimbals and switches.
• 믹스: Create complex mixes for advanced control surfaces or functions.
• 출력: Adjust channel limits, sub-trims, and servo directions.
• 비행 모드: Set up different flight modes with unique settings for various flight conditions.
• 원격 측정 : Monitor real-time data from your aircraft, such as battery voltage, RSSI, and GPS coordinates (if supported by receiver).

6. 유지관리

Proper maintenance ensures the longevity and reliable performance of your TX16S Mark II.

• 청소: Use a soft, dry cloth to clean the transmitter. Avoid abrasive cleaners or solvents.
• 저장: Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• 짐벌 관리: Keep gimbals free from dust and debris. The Hall gimbals are designed for durability but should be handled with care.
• 소프트웨어 업데이트: 최적의 성능과 새로운 기능 이용을 위해 정기적으로 펌웨어 업데이트를 확인하고 설치하십시오.

7. 문제 해결

This section addresses common issues you might encounter with your TX16S Mark II.

8. 기술 사양

9. 보증 및 지원

9.1 보증 정보

Please refer to the warranty card included with your product or visit the official RadioMaster web자세한 보증 약관은 해당 사이트를 참조하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

9.2 고객 지원

For technical assistance, troubleshooting, or general inquiries, please contact RotorLogic customer support. You can find contact information on the RotorLogic brand store on Amazon or their official web대지.