Audioengine A2 HD (HD3) Walnut Computer Speakers and DS1M Metal Stands User Manual

소개

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Audioengine A2 HD (HD3) Walnut Computer Speakers and DS1M Metal Stands. Please read this manual thoroughly before using your product to ensure optimal performance and longevity.

앞쪽 view of the Audioengine A2 HD speakers in walnut finish with grilles on. The left speaker features a volume knob, headphone jack, and Bluetooth pairing button.

상자 안에 무엇이 들어있나요?

Your Audioengine A2 HD (HD3) package includes the following items:

• 빠른 시작 가이드
• 전원 케이블
• 보증 카드

설정

스피커 배치

For optimal sound quality, position the speakers on a stable surface, such as a desk or bookshelf. The included DS1M Metal Stands are designed to elevate and angle the speakers towards your listening position, which can significantly enhance audio performance by directing sound more accurately. Place the left speaker (with controls) on the left side and the right speaker on the right side of your listening area.

An Audioengine A2 HD speaker is shown placed on a DS1M metal stand, positioned next to a laptop, illustrating a typical desktop setup.

This image displays the dimensions of the DS1M speaker stands, indicating a length of 6 inches (15.2 cm) and a width of 4 inches (10.2 cm).

사이

The A2 HD speakers offer multiple connectivity options:

• RCA 입력/출력: Connect audio sources using RCA cables. The RCA output can be used to connect a subwoofer.
• 보조 입력: Use a 3.5mm stereo mini-jack cable for connecting devices like smartphones or tablets.
• USB 입력 : Connect directly to your computer for high-quality digital audio playback.
• 블루투스: 무선 오디오 스트리밍용.

Connect the left (active) speaker to the right (passive) speaker using the provided speaker wire. Ensure correct polarity (+ to + and - to -).

뒤쪽 view of the Audioengine A2 HD speakers, highlighting the various input and output ports, including RCA, USB, and speaker wire terminals for connecting the passive speaker.

전원 연결

Connect the power cable to the left speaker and then to a power outlet. The power indicator on the front of the left speaker will illuminate.

운영

전원 켜기/끄기

The speakers will power on automatically when connected to a power source. To turn them off, disconnect the power cable.

볼륨 조절

Adjust the volume using the knob on the front of the left speaker. You can also control the volume from your connected audio source.

입력 선택

The A2 HD speakers automatically detect and switch to the active input. For Bluetooth, press the Bluetooth pairing button to initiate pairing mode.

블루투스 페어링

1. Turn on your A2 HD speakers.
2. Press and hold the Bluetooth pairing button on the front of the left speaker until the indicator light flashes.
3. On your device (smartphone, tablet, computer), go to Bluetooth settings and select "Audioengine A2 HD" from the list of available devices.
4. Once paired, the indicator light will turn solid.

유지

스피커의 외관과 성능을 유지하려면:

• Wipe the cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• 스피커를 직사광선, 열원 및 습기로부터 멀리 두십시오.
• 스피커 주변에 적절한 환기가 이루어지도록 하십시오.

문제 해결

소리가 나지 않습니다

• Check all cable connections, including power, speaker wire, and audio input cables.
• Ensure the volume knob on the speaker and your audio source is turned up.
• Verify that the correct input source is selected (if applicable, for automatic switching, ensure only one source is active).
• If using Bluetooth, ensure the speakers are properly paired and connected to your device.

블루투스 연결 문제

• Ensure the speakers are in pairing mode (flashing Bluetooth light).
• Delete "Audioengine A2 HD" from your device's Bluetooth list and try pairing again.
• Move your device closer to the speakers to ensure it's within the 100-foot Bluetooth range.
• 기기와 스피커를 모두 재시작하세요.

명세서

보증 및 지원

Your Audioengine A2 HD (HD3) speakers come with a 3년 보증. For warranty claims or technical support, please refer to the contact information provided in your Warranty Card or visit the official Audioengine web대지.

공식 제품 영상