중요한 안전 정보
Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.
- 중량 용량: Do not exceed the maximum weight capacity specified for your model. Overloading can result in serious injury or property damage.
- 벽 구조: The wall mount must be securely attached to a suitable wall structure. Do not install on drywall alone. Ensure the mounting surface can safely support the combined weight of the mount and the television.
- VESA 호환성: Verify your TV's VESA mounting pattern (hole spacing) is compatible with this mount.
- 어린이들: 설치 장소에 어린이가 접근하지 못하도록 하십시오. 작은 부품은 질식 위험이 있습니다.
- 도구: 설치에 적합한 도구를 사용하십시오.
제품 호환성
This instruction manual covers two models of PERLESMITH Full Motion TV Wall Mounts, PSMFK7 and PSMFK1. Please identify your model and confirm your television's specifications before proceeding with installation.
Model PSMFK7
- 화면 크기 호환성: Most 26-55 inch TVs.
- 중량 용량: 최대 70파운드(31.7kg).
- VESA 패턴: 100x100mm to 400x400mm.
Figure 1: PSMFK7 Model Compatibility Overview. This image illustrates the supported screen sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (100x100mm to 400x400mm) for the PSMFK7 TV wall mount.
Model PSMFK1
- 화면 크기 호환성: Most 26-60 inch TVs.
- 중량 용량: 최대 77파운드(35kg).
- VESA 패턴: Up to 400x400mm (16x16 inches).
Figure 2: PSMFK1 Model Compatibility and Wall Types. This image details the wide compatibility of the PSMFK1 model, supporting TVs up to 60 inches and various VESA patterns. It also indicates suitability for single wood stud, brick, and concrete walls.
Confirm Before Purchase
구매 전asing or installing, ensure your TV meets the following criteria:
- TV 무게: Your TV's weight is within the mount's capacity (70 lbs for PSMFK7, 77 lbs for PSMFK1).
- TV 크기 : Your TV's screen size is within the recommended range (26-55" for PSMFK7, 26-60" for PSMFK1).
- 베사 패턴: Your TV's VESA mounting holes match one of the supported patterns.
- 벽 유형: Your wall is suitable for installation (single wood stud, concrete, or brick).
- Cable Blockage: Ensure the mounting holes on your TV do not block any cables or inputs.
Figure 3: Pre-Purchase Confirmation Checklist. This image provides a visual summary of essential checks to perform before installing the TV mount, including TV weight, size, VESA, wall type, and potential cable interference.
무엇이 포함됩니까?
Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.
Figure 4: Package Contents. This image displays the main components of the PERLESMITH full motion TV wall mount kit, including the mount assembly, a bubble level for installation, and cable ties for cable management.
일반적인 패키지 구성품:
- Full Motion TV Wall Mount Assembly
- TV 브래킷 (2개)
- 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
- 버블 레벨
- 케이블 타이 (x3)
- 사용 설명서
설정 및 설치
TV의 안전과 안정성을 위해서는 올바른 설치가 매우 중요합니다. 다음 단계를 주의 깊게 따르십시오.
시작하기 전에
- Gather all necessary tools (e.g., drill, stud finder, level, screwdriver, tape measure).
- Ensure you have a clear, safe workspace.
- Confirm your TV and wall meet the compatibility requirements.
Wall Type Considerations
이 마운트는 다음 위치에 설치하도록 설계되었습니다:
- Single Wood Stud: Locate the center of the wood stud using a stud finder.
- Solid Concrete Wall: Requires a masonry drill bit and concrete anchors.
- 벽돌 벽: Requires a masonry drill bit and brick anchors.
경고: Do not install this TV mount on drywall alone. Drywall cannot support the weight of the mount and TV.
일반 설치 단계
- TV 브래킷을 TV에 부착하세요: 제공된 하드웨어 키트에 포함된 나사, 와셔, 스페이서를 사용하여 TV 뒷면에 세로형 TV 브래킷을 고정하십시오. 브래킷이 중앙에 위치하고 수평인지 확인하십시오.
- Determine Wall Plate Position: Hold the wall plate against the wall at your desired viewing height. Use the included bubble level to ensure it is perfectly horizontal. Mark the drilling locations.
- 드릴 파일럿 홀: Drill pilot holes at the marked locations. For wood studs, drill directly. For concrete or brick, use a masonry bit and insert concrete/brick anchors.
- 안전한 벽면 플레이트: Attach the wall plate to the wall using the lag bolts and washers. Tighten securely, but do not overtighten.
- 벽걸이형 TV 거치대: Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated.
- TV를 안전하게 설치하세요: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5: Centering Your TV. This image demonstrates a TV mounted centrally on a wall, providing a visual guide for optimal placement above a feature like a fireplace.
Figure 6: Corner Mounting Example. This image illustrates how the full motion design allows for effective TV placement in a room corner, maximizing view각도를 나타냅니다.
작동 조정
The full motion design allows for flexible viewing angles. Adjustments can be made after installation.
- 경사: The TV can be tilted +5° upwards to -15° downwards to reduce glare or optimize viewing from different heights. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and re-tighten.
- 받침: The articulating arm allows the TV to swivel up to +/-90° (180° total range) left or right, depending on TV size and wall distance. Gently push or pull the TV to the desired angle.
- 확장/수축: The mount can extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile 바라보다.
- 수준 측량: After installation, the TV can be leveled +/-3° to correct any minor misalignments. Loosen the leveling screws, adjust, and re-tighten.
Figure 7: Full Motion Adjustments. This image visually explains the tilt, extension, swivel, and leveling features of the TV mount, demonstrating the range of motion available for optimal view주고받음.
유지
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 청소: 먼지를 제거하려면 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 연결 확인: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 손상 여부 검사: Regularly inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, discontinue use and contact customer support.
문제 해결
설치 중 또는 설치 후 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | 설치 과정에서 약간의 정렬 불량이 발생했습니다. | Use the +/-3° leveling adjustment feature. Loosen leveling screws, adjust, and re-tighten. |
| 마운트가 헐거워지거나 불안정하게 느껴집니다. | Screws not fully tightened; incorrect wall anchors used; wall structure insufficient. | Ensure all mounting screws are securely tightened. Verify correct anchors for your wall type. If the wall is insufficient, consult a professional. |
| 기울기 또는 회전 조절에 어려움이 있습니다. | Adjustment knobs/bolts are too tight. | Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten to hold the position. |
| TV가 거치대에 맞지 않습니다. | Incorrect TV size, weight, or VESA pattern for the mount model. | Verify your TV's specifications against the mount's compatibility (refer to Product Compatibility section). |
제품 사양
| 특징 | PSMFK7 Model | PSMFK1 Model |
|---|---|---|
| 장착 유형 | 벽걸이형 | |
| 이동 유형 | 관절형, 회전형, 기울기형 | |
| 호환되는 화면 크기 | 26 - 55인치 | 26 - 60인치 |
| 최대 중량 용량 | 70파운드(31.7kg) | 77파운드(35kg) |
| VESA 호환성 | 100x100mm ~ 400x400mm | 최대 400x400mm |
| 기울기 각도 | +5° / -15° | |
| 회전 각도 | +/-90° (up to 180° total, depending on TV size) | |
| 레벨링 조정 | +/-3° | |
| 벽에서 연장된 부분 | 3.2인치(수축 시)에서 19.17인치(확장 시)까지 | |
| 재료 | 합금강 | |
| 호환 가능한 벽 유형 | Single Wood Stud, Solid Concrete, Brick Wall | |
보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact PERLESMITH customer service directly. Keep your purchase receipt for warranty claims.
If you have any questions or require assistance with installation or operation, please do not hesitate to reach out to our support team.