1. 서론
구매해주셔서 감사합니다asing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.
2. 안전수칙
- Always operate your RC vehicle in a safe and responsible manner.
- Ensure batteries are correctly installed and charged before use.
- Do not expose the radio system to water or extreme temperatures.
- Keep the system away from small children to prevent accidental ingestion of small parts.
- Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.
3. 패키지 내용
The Absima CR4S V2 2.4Ghz Radio System package includes the following components:
- Absima CR4S V2 2.4Ghz Transmitter (TX)
- Absima 2.4Ghz Receiver (RX)
4. 제품 오버view
Familiarize yourself with the main components of your Absima CR4S V2 radio system.
Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).
그림 4.2: 상세 view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.
송신기 (TX) 4.1 개
- 스티어링 휠 : Controls the left and right steering of the vehicle.
- 스로틀 트리거: 전진 및 후진 운동을 제어합니다. 당기면 전진하고, 밀면 후진/브레이크가 작동합니다.
- CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
- 트림 조정: Dials or sliders for fine-tuning steering and throttle neutral positions.
- 전원 스위치: 송신기를 켜거나 끕니다.
- 배터리 칸: Located at the bottom of the handle, for installing alkaline batteries.
4.2 수신기 (RX)
- 안테나: Receives signals from the transmitter. Ensure it is properly positioned.
- Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
- 바인딩 버튼: Used to pair the receiver with the transmitter.
5. 설정
5.1 송신기 배터리 설치
- 송신기 손잡이 아래쪽에 있는 배터리함 덮개를 찾으세요.
- 덮개를 밀어 엽니다.
- Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
- 배터리 덮개를 단단히 닫으세요.
5.2 수신기 설치 및 연결
- Mount the receiver securely in your RC vehicle, away from electrical interference.
- Connect the steering servo to the "CH1" port on the receiver.
- Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
- Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
- Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.
5.3 송신기와 수신기 바인딩
바인딩은 송신기와 수신기를 연결하여 서로만 통신할 수 있도록 하는 과정입니다.
- 송신기가 꺼져 있는지 확인하십시오.
- Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
- Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
- While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
- Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
- Turn off the receiver, then the transmitter.
- 수신기에서 바인드 플러그를 제거합니다.
- Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.
6. 운영
6.1 전원 켜기/끄기 순서
- 전원을 켜려면: Turn on the transmitter first, then power on your RC vehicle (receiver).
- 전원을 끄려면: Power off your RC vehicle (receiver) first, then turn off the transmitter.
6.2 기본 컨트롤
- 조종: Rotate the steering wheel left or right to control the direction of your vehicle.
- 조절판: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
- Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.
6.3 초보자 모드
The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.
7. 유지관리
- Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
- Avoid exposing the system to direct sunlight or high humidity for extended periods.
- 장기간 사용하지 않을 경우 누출을 방지하기 위해 송신기에서 배터리를 제거하세요.
- Regularly check all connections for security and wear.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 송신기에 전원이 공급되지 않습니다 | 배터리가 방전되었거나 잘못 설치되었습니다. | 배터리를 교체하거나 극성을 확인하세요. |
| 제어/신호 손실 없음 | Transmitter and receiver not bound; receiver not powered; out of range. | Perform binding procedure; check receiver power; operate within specified range. |
| Erratic control | Interference; loose connections; low battery. | Move to a different location; check all wiring; replace batteries. |
| Steering/Throttle not centered | 트림 설정이 잘못되었습니다. | Adjust steering and throttle trim knobs on the transmitter. |
9. 사양
- 모델 번호: 2000010
- 채널: 4
- 빈도: 2.4GHz
- 송신기 치수: 약 9×2×36 cm
- 무게: Approximately 130 g (Transmitter only, without batteries)
- 재료: 플라스틱
- 색상: 검은색
- Batteries Required (Transmitter): Yes (Alkaline, not included)
- 필요한 조립: 아니요
10. 보증
Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima web대지.
11. 지원
For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.
