1. 서론
Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
2. 안전 정보
설치 및 사용 시 다음 안전 예방 조치를 준수하세요.
- 최대 중량 용량은 33파운드(15kg)를 초과하지 마십시오.
- Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
- Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Always use the provided hardware and follow installation steps carefully.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.
3. 패키지 내용
모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- 모니터 암 어셈블리
- 분리형 VESA 플레이트
- C-Clamp 베이스
- Grommet Base (Optional)
- 장착 하드웨어 키트(나사, 와셔, 스페이서)
- 앨런 렌치
- 사용 설명서
Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 무크 녹스 |
| 화면 크기 호환성 | 22~40인치 |
| 중량 용량 | 6.6 - 33파운드(3 - 15kg) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 장착 옵션 | C-Clamp, 그로밋 |
| 기울기 범위 | +90° / -45° |
| 스위블 범위 | 180°(팔 관절 부분), 360°(VESA 플레이트 부분) |
| 회전 | 360° (세로에서 가로로) |
| 최대 확장 | 22.5인치(57.15cm) |
| 최대 높이 조절 | 19.75인치(50.16cm) |
| 재료 | 합금강 |
| 색상 | 검은색 |
| USB 포트 | 2 (integrated into base, USB cable not included) |
Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.
5. 설정 및 설치
The MOUNTUP monitor arm offers two installation methods: C-Clamp 그리고 그로밋 마운트.
5.1. 설치 방법을 선택하세요
Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.
5.2. C-Clamp 설치
- C-cl을 부착하세요amp to the bottom of the main pole.
- Place the monitor arm assembly onto your desk edge.
- C-cl을 조입니다amp 팔걸이가 책상에 단단히 고정될 때까지 나사를 조이세요.
5.3. Grommet Mount Installation (Optional)
- If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
- Insert the pole through the grommet hole.
- Secure the base from underneath the desk using the provided hardware.
5.4. 모니터 연결
- Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
- Tighten the security screw on the VESA head to prevent accidental detachment.
Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.
6. 운영 및 조정
The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.
6.1. 가스 스프링 장력 조절
The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:
- Monitor raises up: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
- Monitor drops down: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
- 중요한: Hold the arm in a horizontal position during adjustment to prevent sudden movement.
6.2. 높이 조절
Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.
6.3. Tilt Angle Adjustment
To adjust the monitor's tilt angle:
- Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
- Adjust the monitor to your desired tilt angle (+90° to -45°).
- Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.
6.4. 회전 및 스위블
- 받침: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust view각도를 나타냅니다.
- 회전: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.
Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.
Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape view주고받음.
Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").
6.5. 케이블 관리
The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).
Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.
7. 유지관리
정기적인 유지 관리는 모니터 암의 수명과 최적의 성능을 보장합니다.
- 청소: Wipe the arm and base with a soft, damp 옷감. 연마성 세제를 피하십시오.
- 연결 확인: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- 가스 스프링: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.
8. 문제 해결
MOUNTUP 모니터 암 사용 중 문제가 발생하면 다음 일반적인 문제 및 해결 방법을 참조하십시오.
8.1. Monitor Sags or Does Not Hold Position
- 원인: 모니터 무게에 비해 가스 스프링 장력이 너무 낮습니다.
- 해결책: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.
8.2. Monitor Floats Up or is Difficult to Push Down
- 원인: 모니터 무게에 비해 가스 스프링 장력이 너무 높습니다.
- 해결책: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.
8.3. Monitor Tilts Forward or Backward Unexpectedly
- 원인: The tilt angle bolt on the VESA head is loose.
- 해결책: Retighten the tilt angle bolt as described in Section 6.3.
8.4. Arm Feels Loose or Unstable
- 원인: 책상 clamp or grommet mount is not sufficiently tightened.
- 해결책: Recheck and tighten the C-clamp or grommet mounting hardware securely.
9. 보증 및 지원
MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.
For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP web연락처 정보 사이트.
