1. 소개 및 이상view
The DATOUBOSS 2000W Infrared Paint Curing Lamp is designed for efficient and rapid drying and curing of paint coatings, particularly in automotive body repair. This device utilizes shortwave infrared radiation, which penetrates the paint surface to heat from the inside out, significantly reducing curing times and improving work efficiency. The lamp features an adjustable timer and a high-reflectivity reflector for uniform heat distribution.
This manual provides essential information for the safe and effective use of your infrared paint curing lamp조립, 작동, 유지보수 및 문제 해결을 포함합니다.
2. 안전 정보
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 전기 안전: This unit operates at 110V. Ensure the power outlet is properly grounded and capable of handling a 2000W load. It is recommended to plug the lamp directly into a dedicated 120V outlet. If an extension cord is necessary, use a heavy-duty cord (10 gauge or better) to prevent overheating.
- Breaker Tripping: The unit may trip a circuit breaker upon initial startup, especially when cold, due to a high inrush current. This is sometimes normal for high-power heating devices. If it continues to trip after the first attempt, or if it trips during operation, discontinue use and inspect the electrical connection.
- Internal Shorting Risk: Some units may have an internal design flaw where screws in the ceramic connector block can contact the metal shield, creating an electrical short. If you suspect an electrical short (e.g., sparks, burning smell, repeated breaker trips), immediately unplug the unit and do not use it. Professional inspection and repair are required.
- 고온: 난amp generates intense heat. Do not touch the lamp head or bulbs during or immediately after operation. Allow sufficient time for cooling.
- 화재 위험: Keep flammable materials, liquids, and gases away from the lamp during operation. Ensure adequate ventilation in the work area.
- 눈 보호: Avoid direct exposure to infrared radiation. Wear appropriate eye protection when operating the lamp.
- 통풍: Ensure the work area is well-ventilated to dissipate heat and fumes from curing paints.
- 안정: Always ensure the stand is stable and on a level surface to prevent tipping.
- 어린이와 애완동물: 어린이와 애완동물을 작동 중인 장비에서 멀리 떨어뜨려 놓으십시오.amp.
3. 제품 구성품
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- Baking Lamp (SC-003)
- Telescopic Support / Stand
- 고정너트
- 연결판
- 고정판
- 핸들
- 육각렌치
- 사용 설명서(본 문서)
그림 3.1: 제품에 포함된 액세서리
4. 설치 및 조립 지침
Follow these steps to assemble your DATOUBOSS Infrared Paint Curing Lamp:
- 베이스 설치: Manually remove the nut from the telescopic support. Adjust the bolt to the middle position, align it with the two holes on the base, and insert it. Then, tighten the nut securely.
- Install the Connection Board: Align the internal thread through the holes on the connecting plate with the holes on both sides of the mounting plate on the lamp head. Tighten the nuts to ensure the connecting plate is perpendicular to the mounting plate.
- Connect the Bracket: Remove the rotating nut on the top of the telescopic support. Align the hole in the middle of the connecting plate (attached to the lamp head) with the top of the telescopic support, and then tighten the nut.
- 높이 조정: Utilize the two rotating devices on the telescopic support to freely expand or contract the stand, adjusting the lamp to the desired height. Ensure all locking mechanisms are tightened after adjustment.
그림 4.1: 조립 단계
그림 4.2: 높이 조절 범위
Figure 4.3: Adjustable Working Angle
5. 사용 설명서
The DATOUBOSS Infrared Paint Curing Lamp offers flexible operation and precise control for various curing tasks.
5.1. 위치 및 각도 조정
- l 위치amp on a stable, level surface near the area to be cured.
- l 높이 조정amp using the telescopic support to ensure optimal distance from the painted surface.
- 난amp head can be manually adjusted up to 270 degrees to direct heat precisely where needed. Loosen the adjustment knob, set the desired angle, and then tighten the knob to secure it.
- 난amp can be used in a stationary stand configuration or as a handheld unit for targeted applications.
Figure 5.1: Configurable Lifting Bracket in Use
Figure 5.2: Handheld and Stand Operation
5.2. 타이머 기능
- The integrated timer allows you to set the curing duration from 0 to 90 minutes.
- Turn the timer knob to the desired curing time. The lamp will automatically shut off once the set time has elapsed.
- Setting the correct drying time is crucial for achieving optimal paint surface effects without issues like air bubbles.
Figure 5.3: 0-90 Minute Timer
5.3. Curing Process and Applications
The shortwave infrared technology ensures fast and powerful penetration, heating paint layers from the inside out. This method is effective for various paint types and applications.
- Curing Area: 난amp provides a curing area of approximately 650 x 500 mm (25.6 x 19.7 inches).
- 작동 온도: The working temperature can reach 0-200 ℃ (0-392 ℉).
- Typical Drying Times:
- Rust-resistant Primer: 8-10 minutes
- First Putty: 10-14 minutes
- Midway Primer: 11-15 minutes
- Topcoat: 13-19 minutes
- Varnish: 12-19 minutes
- 응용 프로그램: Widely used in auto spray paint rooms, for local paint drying, drying putty, car spray cooking booths, on-site repairs, engine drying, removing adhesive strips, drying filler, primer desiccant, or preheating before spraying.
Figure 5.4: Shortwave Infrared Penetration and Drying Times
Figure 5.5: Penetration Contrast of Infrared Waves
Figure 5.6: Drying Time Comparison (Traditional vs. Shortwave)
그림 5.7: 광범위한 응용 분야
6. 유지관리
Proper maintenance ensures the longevity and optimal performance of your paint curing lamp.
- 청소: l을 확인하세요amp 청소하기 전에 플러그를 뽑고 제품이 완전히 식었는지 확인하십시오. 외부 표면은 부드럽고 마른 천으로 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
- 전구 교체: The infrared bulbs can be quickly disassembled and replaced when necessary. Refer to the product specifications for compatible bulb types. Always ensure the unit is unplugged and cool before attempting bulb replacement.
- 열 발산: 난amp is constructed with an aluminum alloy body and a perforated back panel to enhance heat dissipation. Ensure that the ventilation holes are not obstructed during operation to maintain effective cooling and extend service life.
- 저장: L을 저장amp in a dry, clean environment when not in use.
7. 문제 해결
This section addresses common issues you might encounter with your infrared paint curing lamp.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamp 켜지지 않는다 | No power supply; Timer not set; Damaged bulb; Internal wiring issue. | Check power connection and outlet. Set the timer. Inspect bulbs for damage and replace if necessary. If still not working, contact support. |
| Circuit breaker trips upon startup or during operation | High inrush current (normal for cold start); Overloaded circuit; Electrical short within the unit; Faulty wiring/extension cord. | If it trips once on cold start, try again. Ensure the lamp is on a dedicated 20A circuit. Use a 10-gauge or better extension cord if needed. If repeated, discontinue use and seek professional inspection for internal shorting. |
| Power cord overheats | Inadequate extension cord; Loose connection; Overloaded circuit. | Plug directly into a 120V outlet. If an extension cord is necessary, use a heavy-duty (10 gauge or better) cord. Ensure connections are secure. |
| Uneven curing or slow drying | Incorrect distance from surface; Improper angle; Damaged reflector; Incorrect timer setting. | 조정 lamp distance and angle for uniform coverage. Check reflector for damage. Verify timer settings are appropriate for the paint type. |
| 전구가 깜빡이거나 어두워집니다 | Loose bulb connection; Nearing end of bulb life; Voltag전자 변동. | Ensure bulbs are securely seated. Replace bulbs if they are old. Check power supply for stable voltage. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | ZJ-SC-003-Y |
| 힘 | 2000와트 |
| 권tage | 110V 60Hz |
| Curing Area | 650 x 500mm(25.6 x 19.7인치) |
| 작동 온도 | 0~200℃ (0~392℉) |
| 제품 크기(길이)amp 머리) | 620 x 340 x 190mm(24.4 x 13.3 x 7.4인치) |
| 순중량 | 5.01kg(11.04파운드) |
| 재료 | 알루미늄 합금 |
| 타이머 범위 | 0~90분 |
| 조절 가능한 각도 | 270도 |
9. 보증 정보
Specific warranty details for the DATOUBOSS 2000W Infrared Paint Curing Lamp may vary depending on your region and point of purchase. Please refer to the warranty documentation included with your product or contact the retailer from whom you purchased the item for detailed information regarding warranty coverage, terms, and conditions.
10. 지원 및 연락처 정보
For technical assistance, product inquiries, or to report any issues, please contact DATOUBOSS customer support through the retailer or platform where you purchased this product. Have your model number (ZJ-SC-003-Y) and purchase details ready when contacting support.