OEMIRY Replacement Filter Instruction Manual

1. 제품 오버view

These replacement filters are designed for use with the OEMIRY Faucet Filtration Systems, models OM-WF01 and OM-WF02. They are engineered to provide filtered water by reducing various impurities, ensuring clean and healthy drinking water.

2. 호환성

This replacement filter is specifically compatible with the following OEMIRY Faucet Filtration System models:

• OEMIRY Faucet Filtration System OM-WF01
• OEMIRY Faucet Filtration System OM-WF02

3. 제품 특징

• 멀티tage 여과: Effectively reduces heavy metals, chemical impurities, sediment, and chlorine.
• Premium Coconut Activated Carbon Block: Utilizes a high-quality carbon block for enhanced adsorption capabilities.
• 빠른 흐름율: Designed for efficient water delivery, achieving up to 0.5 gallons per minute.
• 긴 서비스 수명: Each filter provides a maximum service life of 3 months or 320 gallons, which may vary based on local water conditions and usage.
• 인증됨: Independently certified to NSF/ANSI 42 standards for chlorine reduction.

Image: Diagram illustrating the filtration process, highlighting the removal of various impurities and NSF/ANSI 42 certification.

Image: Close-up of the filter's internal coconut activated carbon block.

4. 설치

Follow these steps to install the replacement filter into your OEMIRY Faucet Filtration System:

1. Ensure the faucet filtration system is turned off and no water is flowing.
2. Locate the filter housing at the bottom of your faucet filtration system.
3. Twist the bottom cap of the filter housing counter-clockwise to unlock and remove it.
4. Carefully pull out the old filter cartridge.
5. Insert the new replacement filter cartridge into the housing, ensuring it is properly seated.
6. Align the bottom cap with the housing and twist clockwise to lock it securely in place.
7. Turn on the water supply and check for any leaks. Flush the new filter with water for a few minutes before first use.

Image: Visual guide for easy filter replacement, showing the twist-to-install mechanism.

5. 사용 설명서

After successful installation, your OEMIRY Faucet Filtration System is ready for use. The system allows for easy switching between unfiltered tap water and purified water:

• 얻기 위해 purified water, twist the switch on your faucet filtration system to the designated filter setting.
• 얻기 위해 unfiltered tap water, twist the switch to the bypass setting.

This functionality allows you to conserve filter life by only using purified water when needed for drinking or cooking.

Image: OEMIRY filter and faucet system, demonstrating quick water dispensing.

6. 유지관리

최적의 수질과 시스템 성능을 유지하려면 필터를 정기적으로 교체하는 것이 매우 중요합니다.

• 교체 일정: It is recommended to change the filter cartridge every 3개월 또는 필터링 후 320갤런 물, 둘 중 먼저 오는 것.
• Factors Affecting Life: The actual lifespan of the filter may vary depending on the quality of your municipal tap water and your household's water consumption.
• 교체 필요성 표시: A noticeable decrease in water flow rate or a change in water taste/odor may indicate that the filter needs to be replaced sooner.

Image: Three replacement filters illustrating the recommended replacement cycle.

Image: A single OEMIRY filter cartridge ready for replacement.

7. 문제 해결

Issue: Water still contains Total Dissolved Solids (TDS) after filtration.

• 설명: The OEMIRY OM-WF01 / OM-WF02 faucet filtration system is designed to add beneficial minerals to the water, which contributes to the TDS value. Therefore, this system will not significantly reduce the overall TDS level.
• 해결책: If your primary goal is to physically remove TDS from your water, this faucet filter is not the appropriate solution. For TDS reduction, consider an OEMIRY Reverse Osmosis (RO) system, such as model OM-ROF03 or B0DNDV2JKF.

8. 사양

9. 보증 및 지원

For specific warranty information regarding your OEMIRY Faucet Filtration System or replacement filters, please refer to the documentation included with your original product purchase or visit the official OEMIRY website. For technical support or further assistance, please contact OEMIRY customer service.