RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) User Manual

1. 소개 및 이상view

The RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (model PBP002) is designed to provide reliable power for a wide range of RYOBI ONE+ cordless tools. This compact and lightweight battery ensures consistent performance for various applications, enhancing the portability and efficiency of your tools.

그림 1.1: 앞쪽 view of the RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) showing the fuel gauge LEDs.

2. 안전 정보

Always read and understand all safety warnings and instructions before using this battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• 하지 마세요 immerse the battery in water or other liquids.
• 하지 마세요 store the battery in direct sunlight or in temperatures exceeding 50°C (122°F).
• 하지 마세요 배터리 단자를 단락시킵니다.
• 하지 마세요 배터리를 불 속에 버리십시오.
• 배터리를 어린이의 손이 닿지 않는 곳에 보관하세요.
• Use only with RYOBI ONE+ compatible chargers.
• 배터리가 c라면asing is cracked or damaged, 하지 않는다 그것을 사용하세요.
• 배터리는 지역 규정에 따라 재활용하거나 폐기하십시오.

3. 설정

Proper setup ensures optimal performance and longevity of your battery.

3.1 초기 충전

Fully charge the battery before its first use. Connect the battery to a compatible RYOBI ONE+ charger. The charger's indicator lights will display the charging status. Refer to your charger's manual for specific light patterns.

3.2 배터리 설치

To install the battery into a RYOBI ONE+ tool:

1. RYOBI ONE+ 공구의 배터리 포트에 배터리를 맞춰 장착하십시오.
2. 배터리를 딸깍 소리가 날 때까지 제자리에 단단히 밀어 넣으세요. 딸깍 소리는 배터리가 제대로 연결되었음을 나타냅니다.

그림 3.1: Illustrates the correct method for inserting the battery into a compatible RYOBI ONE+ tool.

4. 사용 설명서

Once the battery is charged and installed, it is ready for operation.

4.1 Powering Tools

With the battery securely installed, your RYOBI ONE+ tool is ready for use. Refer to your specific tool's instruction manual for detailed operating procedures.

4.2 배터리 잔량 표시기

The battery features an on-board fuel gauge to indicate the remaining charge. Press the button on the battery to activate the LEDs. The number of illuminated LEDs corresponds to the approximate charge level:

• 4개의 LED: 75-100% 충전
• 3개의 LED: 50-75% 충전
• 2개의 LED: 25-50% 충전
• 1개의 LED: 0-25% 충전 (곧 충전하세요)

그림 4.1: The battery's fuel gauge showing multiple illuminated LEDs, indicating a high charge level.

5. 유지관리

Regular maintenance helps extend the life and performance of your battery.

5.1 청소

Keep the battery terminals clean and free of dust or debris. Use a dry, clean cloth to wipe the exterior of the battery. 하지 마세요 use solvents or harsh chemicals.

5.2 보관

For long-term storage, store the battery in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the battery with a partial charge (approximately 50%) to help prolong its overall lifespan. Avoid storing fully discharged batteries.

5.3 요금 청구 방식

Recharge batteries promptly after use, especially if they are fully discharged. Avoid leaving batteries on the charger for extended periods after they are fully charged, as this can reduce battery life.

6. 문제 해결

If you encounter issues with your battery, refer to the following common troubleshooting steps.

6.1 배터리가 충전되지 않음

• Ensure the charger is properly plugged into a working electrical outlet.
• 배터리가 충전기에 올바르게 장착되었는지 확인하십시오.
• Check for any visible damage to the battery or charger. If damaged, discontinue use.
• Allow the battery to cool down if it is hot from recent use; some chargers will not initiate charging until the battery reaches a safe temperature.

6.2 공구 전원이 켜지지 않음

• Ensure the battery is fully charged. Check the fuel gauge.
• Verify that the battery is securely installed in the tool until it clicks into place.
• Check for any obstructions or issues with the tool itself. Refer to the tool's manual for specific troubleshooting.

7. 사양

8. 보증

This RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) comes with a 30일 보증 from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modifications, or normal wear and tear. For full warranty terms and conditions, please refer to the official RYOBI warranty documentation or web대지.

9. 고객 지원

For technical assistance, warranty claims, or product inquiries, please contact RYOBI Customer Support.

• 제조업체: RYOBI
• 사업장 위치: One World Technologies Inc. PO Box 1288 Anderson SC 29622
• For the most up-to-date contact information and support resources, please visit the official RYOBI web대지.