1. 서론
This manual provides essential information for the safe and efficient operation of your EPEVER IP3000-22 Plus Pure Sine Wave Inverter. The IPower-Plus series is designed to convert 24V DC battery power to 230V AC pure sine wave power, making it ideal for off-grid home emergency lighting, vehicle-mounted systems, and other applications requiring stable AC power. It features an LCD display, USB output, and advanced protection functions.
2. 안전 정보
- 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
- 과열을 방지하려면 인버터 주변을 적절하게 환기시키십시오.
- 인버터를 물, 비 또는 과도한 습기에 노출시키지 마십시오.
- 인버터는 24V DC 배터리 시스템에만 연결하십시오. 전압이 잘못되었습니다.tag손상을 초래할 수 있습니다.
- Always observe correct polarity when connecting battery cables (positive to positive, negative to negative).
- 출력 단자가 단락되지 않도록 주의하세요.
- 인버터를 직접 열거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 어린이들이 인버터와 연결부에 가까이 가지 않도록 하십시오.
3. 제품 오버view
The EPEVER IP3000-22 Plus Inverter is part of the IPower-Plus series, featuring a 180-degree rotatable LCD display for easy monitoring and compatibility with lithium batteries. It includes a USB port and surge current suppression on the input side (for 48V models without USB), protecting lithium battery cells and BMS from damage. The inverter is designed for low no-load or standby losses.
Figure 3.1: EPEVER IP3000-22 Plus Pure Sine Wave Inverter, main view.
그림 3.2: 측면 view of the inverter, highlighting the dual cooling fans for efficient heat dissipation.
Figure 3.3: Front panel of the inverter, featuring the DC input terminals for battery connection.
Figure 3.4: Rear panel of the inverter, showing the AC output socket, ON/OFF switch, RS-485 communication port, and USB output.
4. 설정
4.1 초기 연결
- 인버터의 전원 스위치가 'OFF' 위치에 있는지 확인하십시오.
- Connect the DC input cables to your 24V DC battery system. Ensure correct polarity: red cable to positive (+), black cable to negative (-). Secure connections tightly.
- Connect your AC loads to the AC output socket on the inverter.
- If using the RS485 communication interface for remote monitoring, connect the appropriate cable to the RS485 port.
4.2 원격 제어 페어링
The inverter supports remote control for convenient operation. Follow these steps to pair your remote control:
- Remove the plastic separator from the remote control's battery compartment.
- Press and hold the inverter's power button for three seconds until the red indicator light illuminates. Release the button.
- Immediately press the 'ON' button on the remote control to complete the pairing process. If the red light flashes, pairing was unsuccessful; repeat the steps.
Video 4.1: This video demonstrates the pairing process for the inverter's remote control, showing how to activate the inverter's pairing mode and then use the remote to establish a connection.
5. 사용 설명서
5.1 전원 켜기/끄기
- To power on the inverter, switch the ON/OFF button to the 'ON' position. The LCD display will illuminate, showing system status.
- To power off the inverter, switch the ON/OFF button to the 'OFF' position.
- Alternatively, use the paired remote control to switch the inverter ON or OFF.
5.2 LCD 디스플레이 사용
The LCD display provides real-time information about the inverter's operation, including battery voltage, 출력 볼륨tage, power consumption, and error codes. The display can be rotated 180 degrees for optimal view주고받음.
5.3 USB 출력
The inverter features a 5VDC/Max.1A USB output, suitable for charging small electronic devices such as smartphones and tablets.
Video 5.1: This video demonstrates the EPEVER Pure Sine Wave Inverter in operation, showcasing its ability to power various household appliances and electronic devices, including a fan, TV, hairbrush, blender, and charging a smartphone.
6. 유지관리
- Regularly inspect all cable connections to ensure they are secure and free from corrosion.
- Keep the inverter's cooling vents clear of dust and debris to maintain proper airflow.
- 인버터 외부를 마른 부드러운 천으로 닦으십시오. 액체 세척제는 사용하지 마십시오.
- 주기적으로 배터리 용량을 확인하세요.tage to ensure it remains within the recommended operating range.
7. 문제 해결
The EPEVER IP3000-22 Plus Inverter is equipped with comprehensive protection features to ensure safe operation. If the inverter is not functioning as expected, check the following:
- 출력 전력 없음: Check if the inverter is switched ON. Verify battery connections and ensure the battery voltage is within the operating range (24V DC system).
- 과부하 보호: If the inverter shuts down due to an overload, reduce the connected load and restart the inverter. The continuous power is 3000W, with a surge power of 6000W (for 5 seconds).
- 단락 보호: Disconnect all loads and check for any short circuits in the wiring or connected appliances.
- 오버볼tage/저용량tage 보호: 배터리 용량 확인tage is stable and within the specified range for a 24V system.
- 과열 보호: Ensure adequate ventilation around the inverter. Clear any obstructions from the cooling fans.
- 역 극성 보호 : Double-check battery connections for correct polarity.
If the issue persists after checking these points, contact customer support.
8. 사양
| 특징 | 사양 |
|---|---|
| 시스템 배터리 용량tage | 24V 직류 |
| 연속 전력 | 3000와트 |
| Surge Power (5s) | 6000와트 |
| 출력 주파수 | 50 / 60Hz ± 0.2 % |
| 최대 효율 | >94% (30% load) |
| 무부하 전류 | <1.0A |
| USB 출력 | 5VDC/최대 1A |
| RS485 인터페이스 | 5VDC / 200mA |
| 보호 정도 | IP20 |
| 단위 치수 | 521×274×148mm |
| 순중량 | 8kg |
| 입력 Voltage | 230 볼트 |
| 출력 볼륨tage | 230권tag전자(AC) |
| Electrical Wave Shape | 순수한 사인 웨이브 |
| 디스플레이 유형 | 액정표시장치 |
| 인증 | CE, RoHS |
9. 보증 및 지원
The EPEVER IP3000-22 Plus Inverter comes with a 2-year manufacturer's limited warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. The isolated RS485 communication interface allows for easy remote monitoring, management, and adjustment via PC software or a mobile phone application, providing additional support capabilities.