CREWORKS 상업용 제빙기 CIM-9036 사용 설명서

1. 서론

Thank you for choosing the CREWORKS Commercial Ice Maker, model CIM-9036. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your ice machine. Please read this manual thoroughly before use and retain it for future reference.

Image 1.1: The CREWORKS Commercial Ice Maker CIM-9036, a stainless steel unit designed for efficient ice production.

2. 안전 지침

경고: 이 안전 지침을 따르지 않을 경우 화재, 감전 또는 부상을 입을 수 있습니다.

• 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tag기기의 정격 라벨에 지정되어 있습니다.
• Do not operate the ice maker with a damaged power cord or plug. Contact qualified service personnel for repair.
• 제품을 열원과 직사광선에서 멀리 두십시오.
• 제품, 코드, 플러그를 물이나 기타 액체에 담그지 마십시오.
• Unplug the ice maker before cleaning, maintenance, or when not in use.
• 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
• 얼음을 만들 때는 식수만 사용하십시오.
• 기기 주변의 환기가 잘 되도록 하십시오. 통풍구를 막지 마십시오.

3. 설정 및 설치

제빙기의 최적 성능과 긴 수명을 위해서는 올바른 설치가 매우 중요합니다. 다음 단계를 주의 깊게 따르십시오.

1. 짐 풀기: Carefully remove the ice maker from its packaging. Inspect for any shipping damage. Retain packaging for future transport if needed.
2. 놓기: Place the unit on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for air circulation.
3. 물 연결: The ice maker offers two water input options:
   • 직접 급수: Connect the ice maker to a cold water tap using the provided water inlet hose. Ensure all connections are secure to prevent leaks. A water filter is recommended for optimal ice quality.
   • Bottled Water Supply: Alternatively, you can place a standard bottled water dispenser on top of the unit for a manual water supply.
4. 배수: Connect the water drain hose to the unit and ensure it leads to a suitable drain. The drain must be lower than the ice maker's drain outlet for gravity drainage.
5. 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.

Image 3.1: Diagram illustrating the two water connection methods: direct tap connection with filter (left) and bottled water supply (right).

4. 사용 설명서

The CREWORKS Commercial Ice Maker features an intuitive control panel for easy operation.

Image 4.1: Close-up of the intuitive control panel and LCD screen, showing various settings and indicators.

1. 전원 켜기: 제어판의 전원 버튼을 눌러 장치를 켭니다.
2. 초기 얼음 생산: The machine will automatically start the ice-making cycle. The LCD screen will display relevant information such as ambient temperature and ice-making time.
3. Adjusting Ice Thickness/Cycle Time: Use the '+' and '-' buttons on the control panel to adjust the ice-making cycle duration, which influences the thickness of the ice cubes.
4. 자동 작동: The ice maker can be programmed for automatic start and stop times, allowing you to schedule ice production as needed. Refer to the control panel for specific programming instructions.
5. 얼음 수집: Once an ice-making cycle is complete, the ice cubes will drop into the storage bin. The unit will pause if the ice bin is full (indicated by "Ice Full" on the display) and resume when ice is removed.

Image 4.2: Visual guide showing the simple three-step process: 1. Open water source, 2. Adjust ice making time on LCD, 3. Collect ice.

5. 유지관리 및 청소

Regular cleaning and maintenance ensure hygienic ice production and extend the lifespan of your appliance.

1. 자동 청소 기능: The ice maker is equipped with an auto-cleaning function. Press the "Cleaning" button on the control panel to initiate this cycle. This helps maintain internal hygiene.
2. 외부 청소: 부드러운 천으로 기기 외부를 닦아주세요.amp cloth. For stainless steel surfaces, use a non-abrasive cleaner designed for stainless steel.
3. 얼음통 청소: Periodically remove the ice bin and wash it with mild soap and warm water. Rinse thoroughly and dry before placing it back.
4. 물 시스템 청소: For thorough cleaning of the water system, it is recommended to run a cleaning solution (e.g., diluted vinegar or commercial ice maker cleaner) through the system periodically, followed by several rinses with fresh water. Always refer to the specific instructions for the cleaning solution used.
5. 공기 필터 청소: The air vents and condenser coils should be cleaned regularly to ensure efficient cooling. Use a soft brush or vacuum cleaner to remove dust and debris.

Image 5.1: A hand activating the auto-cleaning function on the control panel, highlighting the importance of hygiene.

6. 문제 해결

고객 지원팀에 문의하기 전에 다음의 일반적인 문제와 해결 방법을 참조하세요.

7. 사양

Technical details for the CREWORKS Commercial Ice Maker CIM-9036:

• 모델: CIM-9036
• 상표: 크레웍스
• 힘: 480 와트
• 권tage: 220 볼트
• 일일 얼음 생산량: Up to 58 kg (when water temperature is below 5°C)
• Ice Cubes per Batch: 36
• 얼음 저장 용량: 10kg
• 제품 크기 (근사치): 43cm(깊이) x 36cm(너비) x 76cm(높이)
• 소음 수준: <45dB (XNUMXdB)
• 재료: 식품 등급 스테인레스 스틸

Image 7.1: Diagram showing the approximate dimensions of the ice maker: 43 cm depth, 36 cm width, and 76 cm height.

8. 보증 및 고객 지원

For warranty information or technical assistance, please contact CREWORKS customer support. Keep your purchase receipt as proof of purchase.

Contact information can typically be found on the CREWORKS official web사이트 또는 제품 포장에 표시하세요.