1. 서론
The Einhell TE-MA 1700 wall chaser is designed for cutting horizontal and vertical grooves and channels in masonry, primarily for laying pipes and cables. This tool facilitates precise cutting operations on hard materials, offering an efficient alternative to manual methods. Its 1700 W motor drives two parallel cutting discs, enabling accurate groove creation. The tool features continuous adjustment of cutting depth and individual width adjustment for various groove sizes. Safety features include soft start and overload protection. A guide roller and auxiliary handle provide a secure grip for controlled use. The spindle lock system simplifies disc changes. An adapter is included for connecting a wet/dry vacuum cleaner to reduce dust during operation. The 4-meter power cable provides a flexible working range. The product is supplied with a transport case and four diamond cutting discs.
2. 안전 지침
Always observe general safety regulations when operating power tools. Read and understand all instructions before use. Keep this manual for future reference.
- 개인 보호 장비: Always wear safety goggles, hearing protection, a dust mask, and work gloves when operating the wall chaser.
- 작업 영역: Ensure the work area is clean, well-lit, and free from obstructions. Keep bystanders and children away.
- 전기 안전: Ensure the power supply matches the tool's specifications. Do not use the tool in damp or wet conditions. Avoid damaging the power cable.
- 도구 취급: Maintain a firm grip on the tool with both hands. Do not overreach. Ensure stable footing.
- 디스크 안전: Only use cutting discs specified for this tool. Ensure discs are correctly installed and tightened before operation. Inspect discs for damage before each use.
- 먼지 관리: Connect a suitable dust extraction system to minimize dust exposure.
- 과부하 보호: The tool is equipped with overload protection. If the tool stops due to overload, release the trigger and allow it to cool before resuming operation.
- 소프트 스타트 : The soft start feature ensures a gradual increase in speed, reducing kickback and improving control.
- 유지: 조정, 액세서리 교체 또는 유지 보수를 하기 전에 공구의 전원을 차단하십시오.
3. 제품 오버view
Familiarize yourself with the components of your Einhell TE-MA 1700 Wall Chaser.
그림 3.1: 전면 view of the Einhell TE-MA 1700 Wall Chaser.
포함된 구성 요소:
- Einhell TE-MA 1700 Wall Chaser
- 1 육각 키
- 1 운송 케이스
- 4 Diamond Cutting Discs (Ø 150 mm)
Figure 3.2: The wall chaser with its transport bag, diamond cutting discs, and hex key.
주요 특징:
- 절삭 깊이 조절 가능: The cutting depth can be continuously adjusted up to 40 mm.
- 조정 가능한 절단 폭: The cutting width can be individually set up to 38 mm.
- 스핀들 잠금: Facilitates easy and secure changing of cutting discs.
- Dust Extraction Adapter: For connection to a vacuum cleaner to maintain a clean work environment.
- 소프트 스타트 : Ensures a smooth start-up of the motor.
- 과부하 보호: Protects the motor from damage due to excessive load.
- Guide Roller and Auxiliary Handle: Provide enhanced control and comfortable handling.
4. 설정
4.1. Installing Cutting Discs
- 공구가 전원 공급 장치에서 분리되어 있는지 확인하십시오.
- 스핀들 잠금 버튼을 길게 누릅니다.
- Use the hex key to loosen the clamping nut and remove the outer flange.
- Place the diamond cutting discs onto the spindle, ensuring the rotation direction arrows on the discs match the arrow on the tool. For two discs, place a spacer between them.
- Reinstall the outer flange and tighten the clamping nut securely with the hex key while holding the spindle lock button.
Figure 4.1: Spindle lock button for disc changes.
4.2. 절단 깊이 조정
The cutting depth can be adjusted continuously to suit your application.
- 깊이 조절 손잡이를 푼다.
- Move the guide plate to the desired depth indicated on the scale (up to 40 mm).
- 깊이 조절 손잡이를 단단히 조여 설정을 고정하십시오.
Figure 4.2: Cutting depth adjustment mechanism.
4.3. 절단 폭 조정
The cutting width can be adjusted by adding or removing spacers between the cutting discs.
- Follow the steps for installing cutting discs (Section 4.1).
- Insert or remove spacers as needed to achieve the desired cutting width (up to 38 mm).
- Ensure all components are securely tightened before operation.
4.4. 집진 장치 연결
For a cleaner work environment and improved visibility, connect a wet/dry vacuum cleaner to the dust extraction adapter.
- Attach the hose of a suitable wet/dry vacuum cleaner to the dust extraction port on the wall chaser.
- 먼지가 새지 않도록 연결이 안전한지 확인하세요.
Figure 4.3: Dust extraction connection.
5. 운영
5.1. 도구 시작하기
After ensuring all safety precautions are met and the setup is complete:
- 공구를 적합한 전원 콘센트에 연결하십시오.
- 두 손으로 도구를 단단히 잡으세요.
- Press the ON/OFF switch. The soft start feature will gradually bring the discs to full speed.
5.2. 절단 기술
The Einhell TE-MA 1700 is designed for a pulling cut motion.
- Position the tool with the guide plate flat against the workpiece.
- Engage the power switch.
- Slowly guide the tool along the desired cutting line, pulling it towards you. Apply steady, even pressure.
- Avoid forcing the tool, as this can trigger the overload protection.
- For deeper channels, multiple passes may be required.
- After cutting, the material between the two grooves can be removed using a hammer drill or chisel.
Figure 5.1: Proper operation of the wall chaser.
5.3. Working on Different Materials
This wall chaser is suitable for masonry materials. Always ensure the diamond cutting discs are appropriate for the specific material being cut.
6. 유지관리
Regular maintenance ensures the longevity and performance of your tool. Always disconnect the power plug before any maintenance work.
6.1. 청소
- After each use, clean the tool thoroughly, especially the ventilation slots and the area around the cutting discs.
- Use a brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
- Ensure the dust extraction port is clear of blockages.
6.2. 디스크 교체
Replace cutting discs when they become worn or damaged. Refer to Section 4.1 for disc installation instructions.
6.3. 보관
- Store the wall chaser in its transport case in a dry, secure place, out of reach of children.
- 보관하기 전에 도구가 깨끗하고 이물질이 없는지 확인하십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않음 | 전원 공급 없음; 스위치 오류; 과부하 보호 기능 활성화 | Check power connection; Contact service; Allow tool to cool down and reset |
| 작업 중 공구가 멈춤 | Overload protection activated; Power interruption | Reduce cutting pressure, allow tool to cool; Check power supply |
| 불량한 절단 성능 | Worn or incorrect cutting discs; Incorrect depth/width setting | Replace discs; Adjust depth/width settings |
| 과도한 먼지 | Dust extraction not connected or blocked; Vacuum cleaner not effective | Connect/clear dust extraction; Use a more powerful vacuum cleaner |
8. 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | 4350740 |
| 전원 입력 | 1700와트 |
| 무부하 속도 | 7000 분당 |
| 권tage | 240V(XNUMXV) |
| 최대 절단 깊이 | 40mm (XNUMXmm) |
| 최대 절단 폭 | 38mm (XNUMXmm) |
| 절단 디스크 직경 | 150mm (XNUMXmm) |
| 아버 크기 | 22.2mm (XNUMXmm) |
| 무게 | 6.8kg |
| 치수(길이 x 너비 x 높이) | 38.3 x 21.9 x 22cm |
| 케이블 길이 | 4분 |
| 블레이드 소재 | 다이아몬드 |
| 손잡이 재질 | 플라스틱/복합재료 |
9. 보증 및 지원
This Einhell product comes with a limited or full warranty, as specified at the time of purchase. Spare parts are available for a period of 1 year.
For warranty claims, technical assistance, or spare parts, please contact Einhell customer support or your authorized dealer. Keep your proof of purchase for warranty validation.
For more information, visit the official Einhell web자세한 내용은 해당 사이트를 참조하거나 제품 포장과 함께 제공된 연락처 정보를 참조하세요.
