amFilm OneTouch 화면 보호 필름 사용 설명서

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your amFilm OneTouch Screen Protector for the Samsung Galaxy S22 5G 6.1 Inch. This product is designed to offer superior protection with an easy, bubble-free application process.

Figure 1: amFilm OneTouch Screen Protector Kit for Samsung Galaxy S22 6.1 Inch.

패키지 내용

Your amFilm OneTouch Screen Protector package includes the following items:

• 2 x amFilm OneTouch Screen Protectors (pre-installed in auto-alignment tool)
• 2 x 카메라 렌즈 프로텍터
• 2 x Wet Wipes
• 2 x Microfiber Cloths
• 2 x Large Dust Removal Covers
• 2 x 먼지 제거 스티커

그림 2: 상세 view 패키지에 포함된 모든 품목.

설정 및 설치

The amFilm OneTouch Screen Protector features a patented auto-alignment tool for a quick and easy installation. Please follow these steps carefully for optimal results.

화면 보호기 설치

설치 과정을 시각적으로 안내하려면 공식 설치 영상을 시청하세요.

1. 화면 청소: Begin by thoroughly cleaning your phone screen using the provided wet wipe. Follow up with the microfiber cleaning cloth to remove any streaks or smudges. Ensure the screen is completely dry and free of dust.
2. 먼지 제거: Use the large dust removal cover or dust removal stickers to pick up any remaining dust particles from the screen. This step is crucial for a bubble-free application.
3. Prepare the Alignment Tool: The screen protector comes pre-installed in the auto-alignment tool. Locate the tab marked "TOP" and gently pull the tab downwards to remove the mask film from the screen protector. Ensure you pull downwards to avoid dislodging the screen protector from the tray.
4. 정렬 및 적용: Carefully place the auto-alignment tool over your Samsung Galaxy S22 6.1 inch phone. The tool is designed to perfectly align the screen protector with your device. Once aligned, press down gently on the circular cutout at the top for 2 seconds.
5. 매끄러운 도포: Press the screen protector firmly on the "TOP" section of the alignment tool and slowly slide your finger over the entire length of the screen protector from top to bottom. You will see the adhesive spread across the screen automatically.
6. 트레이를 제거하세요: Once the adhesive has fully spread, carefully remove the application tray from your phone. The blue film on the screen protector will come off with the tray, leaving the tempered glass perfectly applied.
7. 최종 접착력: If necessary, gently press along the edges of the screen protector to enhance adhesion to the phone's surface.

Figure 3: Visual steps for screen and camera lens protector installation.

Camera Lens Protector Installation

1. 카메라 렌즈 청소: Use a wet wipe and microfiber cloth to clean the camera lenses on the back of your phone.
2. 먼지 제거: Use a dust removal sticker to ensure no dust remains on the camera lenses.
3. Prepare Lens Protector: Bend the plastic sheet containing the camera lens protectors to carefully peel off one lens protector.
4. 정렬 및 적용: Align the camera lens protector precisely over your phone's camera lenses.
5. Secure Adhesion: Press firmly on the protector to help it adhere completely to the camera lens area.

작동 지침

Fingerprint Sensor Functionality

After installing the screen protector, it is highly recommended to re-register your fingerprints for optimal performance of the in-display fingerprint sensor. This ensures accurate and responsive unlocking.

Figure 4: Guide to rescanning your fingerprint for improved sensor performance.

케이스 호환성

The amFilm OneTouch Screen Protector is designed to be case-friendly, meaning it is slightly smaller than the actual screen size to ensure compatibility with most phone cases without lifting or bubbling at the edges.

Figure 5: Illustration of the screen protector's case-friendly dimensions.

유지

To maintain the clarity and responsiveness of your amFilm screen protector, regularly wipe it with a clean, soft microfiber cloth. The oleophobic coating helps reduce fingerprints and smudges, but occasional cleaning will keep your screen pristine.

Avoid using harsh chemicals or abrasive materials, as these can damage the coating and the tempered glass.

문제 해결

일반적인 문제 및 솔루션

• 설치 후 기포 발생: Small bubbles can sometimes appear immediately after installation. Most small bubbles will naturally disappear within 24-48 hours. For larger bubbles, gently lift the nearest corner of the screen protector and slowly push the bubble towards the edge using a microfiber cloth or a soft card. Re-adhere the lifted section carefully.
• Fingerprint Sensor Not Responsive: If your fingerprint sensor is not working correctly after installation, ensure you have re-registered your fingerprints. Navigate to your phone's settings (e.g., "Display" > "Touch sensitivity" or "Biometrics and security" > "Fingerprints") and delete existing fingerprints, then add new ones with the screen protector applied.
• Screen Protector Lifting at Edges: This can sometimes occur if the screen was not perfectly clean or if the phone case is too tight. Ensure the screen is free of dust and debris before installation. If using a case, verify it is not pushing against the edges of the screen protector. The amFilm protector is designed to be case-friendly, but some overly tight cases may still cause issues.

Figure 6: The 9H hardness tempered glass provides robust drop protection.

명세서

보증 및 지원

amFilm offers a Lifetime Warranty for this product upon registration. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official amFilm web대지.