소개
This manual provides instructions for the safe and efficient operation of your CREWORKS Ultrasonic Cleaner, Model SX-DUCV106. This device utilizes ultrasonic cavitation to thoroughly clean various items, including vinyl records, jewelry, glasses, and more. Please read this manual carefully before use and retain it for future reference.
Image: Before and After Cleaning Demonstration
안전 지침
경고: 이러한 안전 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상이 발생할 수 있습니다.
- Only use with grounded electrical outlets.
- 장치를 분해하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- Do not operate the unit without water in the tank. Ensure the water level is between the MIN and MAX marks.
- 인화성, 폭발성 또는 부식성 세척액을 사용하지 마십시오.
- 젖은 손으로 전기 부품을 만지지 마세요.
- 장치를 어린이와 애완동물의 손이 닿지 않는 곳에 두십시오.
- Ensure proper ventilation during operation, as the unit can generate heat.
- 청소나 유지관리를 하기 전에 장치의 플러그를 전원에서 뽑으세요.
제품 구성 요소
The CREWORKS Ultrasonic Cleaner package includes the following items:
- Ultrasonic Cleaner Unit with Stainless Steel Tank
- 뚜껑
- 전원 코드
- Cleaning Basket (for small items)
- Vinyl Record Washing Rack (holds up to three 7" or 12" records)
- Vinyl Record Drying Rack
- 배수 밸브
Image: Included Components
설정
- Place the ultrasonic cleaner on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
- 배수 밸브를 단단히 닫으십시오.
- Fill the stainless steel tank with water. For enhanced cleaning, a small amount of appropriate cleaning solution can be added. Do not exceed the maximum fill line.
- 전원 코드를 본체에 연결한 다음 접지된 콘센트에 연결하십시오.
Image: Ultrasonic Cleaner Unit
작업
General Cleaning Procedure
- After filling the tank (see Setup), place the items to be cleaned into the cleaning basket. Ensure items are fully submerged but not touching the bottom of the tank.
- 청소 바구니를 탱크에 넣으세요.
- Set the desired cleaning time using the 'TIME +' and 'TIME -' buttons on the control panel. The timer can be set up to 30 minutes.
- Set the desired temperature using the 'TEMP +' and 'TEMP -' buttons. The heater can warm the solution up to 175°F (79°C). Heating can improve cleaning effectiveness for some items.
- Press the 'ON/OFF' button for the ultrasonic function to start cleaning. Press the 'ON/OFF' button for the heater function if heating is desired.
- 설정된 시간이 지나면 장치가 자동으로 멈춥니다.
- Carefully remove the cleaning basket and rinse the cleaned items with clean water.
Vinyl Record Cleaning Procedure
- Assemble the vinyl record washing rack and place it over the tank.
- Carefully mount up to three 7-inch or 12-inch vinyl records onto the rack, ensuring the labels are protected from the cleaning solution.
- Lower the records into the tank, ensuring the grooves are submerged in the cleaning solution.
- Set the desired cleaning time and temperature as described in the General Cleaning Procedure.
- Start the ultrasonic cleaning and heating functions.
- Once cleaning is complete, carefully lift the records from the tank.
- Place the cleaned records onto the included drying rack to air dry completely before storage or playback.
Image: Vinyl Records in Cleaning Rack
Image: Record Drying Rack
제어판 이상view
The digital control panel allows precise setting of cleaning parameters.
- SET TEMP (°C) / ACTUAL TEMP (°C): Displays the set temperature and the current actual temperature of the solution.
- 온도 상승 / 온도 하강: 목표 온도를 높이거나 낮추는 버튼.
- ON/OFF (Heater): 난방 기능을 활성화하거나 비활성화합니다.
- SET TIME (MINUTES SECONDS): Displays the set cleaning duration.
- TIME + / TIME -: Buttons to increase or decrease the cleaning time.
- ON/OFF (Ultrasonic): 초음파 세척 기능을 활성화하거나 비활성화합니다.
Image: Digital Control Panel
유지
- 탱크 배수: After each use, especially if using cleaning solutions, drain the tank by opening the drain valve. Place a container underneath to collect the liquid.
- 탱크 청소: Rinse the stainless steel tank with clean water. Wipe the interior and exterior surfaces with a soft, damp 옷감. 연마성 세제나 철수세미를 사용하지 마십시오.
- 저장: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.
- 정기 검사: Periodically check the power cord for any damage. Ensure the drain valve operates smoothly.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; Power cord not connected; Faulty outlet. | Check power cord connection; Test outlet with another device; Ensure unit is plugged into a grounded outlet. |
| 초음파 기능이 작동하지 않습니다. | Ultrasonic function not activated; Insufficient water in tank. | Press the ultrasonic 'ON/OFF' button; Ensure water level is above MIN mark. |
| Heater not working or overheating. | Heater function not activated; Sensor malfunction; Prolonged operation. | Press the heater 'ON/OFF' button; Allow unit to cool down; If overheating persists, discontinue use and contact support. |
| 세척 결과가 좋지 않음. | Incorrect cleaning solution; Insufficient cleaning time/temperature; Items not properly submerged. | Use appropriate cleaning solution for item type; Increase cleaning time or temperature; Ensure items are fully submerged. |
| 이 장치는 너무 시끄럽습니다. | Normal operation sound; Items touching tank walls. | Some operational noise is normal for ultrasonic cleaners. Ensure items are in the basket and not directly touching the tank. Consider operating in a well-ventilated area away from sensitive ears. |
명세서
- 모델: SX-DUCV106
- 탱크 용량: 1.6 갤런 (6 리터)
- 초음파 전력: 180와트
- 난방 전력 : 최대 200W
- 초음파 주파수: 40kHz
- 타이머 설정 : 0-30 minutes (Digital)
- 온도 설정 : Up to 175°F (79°C) (Digital)
- 탱크 재질 : 304 스테인리스 스틸
- 제품 크기: 약 12.8 x 6.9 x 10.2인치
- 품목 무게: 약 10.5파운드
이미지: 제품 크기
보증 및 지원
CREWORKS products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Please have your model number (SX-DUCV106) and purchase information ready when contacting support.
For the most up-to-date contact information, please visit the official CREWORKS web사이트를 방문하거나 구매 문서를 참조하세요.