1. 소개 및 이상view
The CREWORKS 10L Professional Ultrasonic Cleaner is designed for effective cleaning of various items such as jewelry, eyeglasses, coins, and makeup brushes. It features 240W ultrasonic power, a 40 kHz frequency, and 300W heating. This manual provides essential information for the safe and efficient operation of your ultrasonic cleaner.
주요 특징:
- 10L 용량: Generous tank volume for various cleaning tasks.
- 240W Ultrasonic Power & 40 kHz Frequency: Provides powerful and efficient cleaning action.
- 300W Heating Function: Accelerates the cleaning process by assisting in dirt removal.
- 탈기 모드: Quickly removes gas bubbles from cleaning solutions and porous objects, enhancing cavitation efficiency.
- 부드러운 모드: Reduces ultrasonic power by half for protective cleaning of delicate items.
- 직관적인 제어판: Easy adjustment of cleaning duration (up to 30 minutes) and temperature (0-80℃).
- 내구성 있는 구조: Made with 304 stainless steel tank and basket for prolonged use and compliance with food safety standards.
The CREWORKS 10L Professional Ultrasonic Cleaner, showcasing its robust stainless steel construction and user-friendly digital interface.
2. 안전 정보
Please read all safety instructions carefully before operating the ultrasonic cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 항상 접지된 전원 콘센트에 장치를 연결하세요.
- 탱크에 액체가 없는 상태에서 제품을 작동하지 마십시오.
- 본체를 물이나 기타 액체에 담그지 마십시오.
- 본 제품을 어린이의 손이 닿지 않는 곳에 보관하세요.
- 젖은 손으로 전원 플러그를 만지지 마세요.
- 청소 또는 유지 관리 전에 장치의 플러그를 뽑으십시오.
- Ensure proper ventilation during operation, especially when using cleaning solutions.
- Avoid using flammable or corrosive cleaning solutions.
- 장치를 분해하지 마십시오. 자격을 갖춘 기술자에게 정비를 의뢰하십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- CREWORKS 10L Professional Ultrasonic Cleaner Unit
- 스테인리스 스틸 청소 바구니
- 스테인리스 스틸 뚜껑
- 전원 코드
- 사용자 설명서
4. 제품 오버view / 구성 요소
Familiarize yourself with the main components of your ultrasonic cleaner.
상세한 view of the intuitive digital control panel, allowing precise adjustments for temperature, cleaning time, and activation of specialized cleaning modes.
주요 구성 요소:
- 스테인레스 스틸 탱크: Holds the cleaning solution and items.
- 디지털 제어판: For setting time, temperature, and modes.
- 가열 요소: Warms the cleaning solution.
- 초음파 변환기: Generate ultrasonic waves.
- 배수 밸브: For easy draining of the tank.
- 뚜껑: Reduces noise and prevents splashing.
- 청소 바구니: Holds items during cleaning, keeping them off the tank bottom.
5. 설정
- 놓기: Place the ultrasonic cleaner on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit.
- 전원 연결: 전원 코드를 본체에 연결한 다음 접지된 콘센트에 연결하십시오.
- 탱크를 채우세요: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Do not exceed the 'MAX' fill line. Ensure the items to be cleaned will be fully submerged.
- Insert Basket and Items: Place the cleaning basket into the tank. Carefully place the items to be cleaned into the basket, ensuring they do not touch each other or the bottom of the tank directly.
- 뚜껑 닫기: Close the lid to reduce noise and prevent splashing during operation.
6. 사용 설명서
Follow these steps to operate your CREWORKS ultrasonic cleaner:
- 전원 켜기: Plug in the unit. The digital display will illuminate.
- 설정 온도(선택 사항): Press the 'TEMP' button to adjust the desired heating temperature (0-80℃). The unit will begin heating the solution. Heating can accelerate the cleaning process.
- Activate Degas Mode (Recommended): For optimal cleaning, especially with new solutions or porous items, press the 'DEGAS' button. This mode removes air bubbles from the solution, improving ultrasonic efficiency. Run for 1-2 minutes.
- 청소 시간 설정: Press the 'TIME' button to set the desired cleaning duration (1-30 minutes).
- 청소 모드 선택:
- 표준 청소: Simply start the unit after setting time and temperature.
- 부드러운 모드: For delicate items, press the 'GENTLE' button. This reduces ultrasonic power by half to prevent damage.
- 청소 시작: Press the 'ON/OFF' button to start the ultrasonic cleaning process. The timer will count down.
- 사이클 종료: The unit will automatically stop when the timer reaches zero. You can manually stop the process at any time by pressing the 'ON/OFF' button.
- 항목 제거: Carefully open the lid and use the basket to lift the cleaned items out of the tank. Rinse items with clean water if necessary and dry them thoroughly.
- 배수 탱크: After cleaning, unplug the unit. Open the drain valve to empty the used cleaning solution into a suitable container. Close the valve once empty.
Visual explanation of how ultrasonic waves create and collapse microscopic bubbles, providing thorough cleaning even in hard-to-reach areas.
Understanding the Degas mode for optimizing cleaning solution and the Gentle mode for safely cleaning fragile objects.
Visual demonstration of the cleaning effectiveness, showing items before and after ultrasonic treatment.
7. 유지관리
적절한 유지 관리는 초음파 세척기의 수명과 최적의 성능을 보장합니다.
- 탱크 청소: After each use, drain the tank and rinse it with clean water. Wipe the interior and exterior with a soft, damp 옷감. 연마성 세제나 철수세미를 사용하지 마십시오.
- 석회질 제거(필요한 경우): If mineral deposits build up in the tank, use a mild descaling solution specifically designed for stainless steel, following the product instructions.
- 저장: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- 전원 코드: Inspect the power cord regularly for any signs of damage. If damaged, contact customer support for replacement.
8. 문제 해결
문제가 발생하면 다음 문제 해결 가이드를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않음 | No power supply; Power cord loose; Unit damaged | Check power outlet; Ensure power cord is securely plugged in; Contact customer support |
| 초음파 작용 없음 | Tank empty or insufficient liquid; Unit not started; Transducer fault | Fill tank to appropriate level; Press 'ON/OFF' button; Contact customer support |
| 난방이 작동하지 않음 | Heating function not activated; Heating element fault | Press 'TEMP' button to set temperature; Contact customer support |
| 청소 결과 불량 | Incorrect cleaning solution; Solution too cold; Overloaded tank; Items touching tank bottom; Degas mode not used | Use appropriate solution; Increase temperature; Reduce number of items; Use cleaning basket; Activate Degas mode |
If the problem persists after attempting these solutions, please contact CREWORKS customer support.
9. 사양
Technical specifications for the CREWORKS 10L Professional Ultrasonic Cleaner:
| 특징 | 사양 |
|---|---|
| 모델 | 듀크 |
| 탱크 용량 | 10리터 |
| 초음파 파워 | 240와트 |
| 가열 전력 | 300와트 |
| 초음파 주파수 | 40kHz |
| 타이머 범위 | 1-30분 |
| 온도 범위 | 0~80℃ |
| 탱크 소재 | 304 스테인리스 스틸 |
| 전체 치수(길이 x 너비 x 높이) | 37 x 27 x 30cm |
| 탱크 치수(L x W x H) | 30 x 24 x 17cm |
| 무게 | 6.5kg |
Visual representation of the ultrasonic cleaner's overall dimensions (37x27x30 cm) and the internal tank (30x24x17 cm) and basket (27x21x15 cm) measurements.
10. 보증 및 지원
CREWORKS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact CREWORKS customer service through the retailer where the product was purchased or visit the official CREWORKS web연락처 정보 사이트.