DJI RC Pro Smart Controller User Manual

소개

The DJI RC Pro Smart Controller is engineered for professional-level aerial photography, offering enhanced stability and smoothness through its next-generation processor and increased storage capacity. It integrates powerful O3+ video transmission technology and features control sticks similar to those found on DJI FPV, providing precise and ultra-smooth control. This controller boasts a high-bright display, robust performance, efficient control mechanisms, and superior audio and video capabilities.

설정

언박싱 및 초기 검사

Upon receiving your DJI RC Pro, carefully unbox the contents. The package includes the DJI RC Pro controller and a USB 3.0 Type-C Cable. Please note that a USB Charger and the DJI Retail Box are not included.

• 컨트롤러에 눈에 띄는 손상이 있는지 검사하십시오.
• 나열된 모든 구성 요소가 있는지 확인하세요.

Attaching Control Sticks and Antennas

The control sticks for the DJI RC Pro are typically stored in the back of the controller for protection during transport. To prepare for use:

1. Locate the control sticks on the back of the controller.
2. Gently screw each control stick into its designated port on the front of the controller until secure.
3. Extend the antennas located on the top rear of the controller to an appropriate angle for optimal signal transmission.

그림 1: 전면 view of the DJI RC Pro Smart Controller, showcasing the integrated display and control layout.

그림 2: 측면 view of the DJI RC Pro Smart Controller, highlighting its ergonomic design and extended antennas.

컨트롤러 작동

주요 기능 및 컨트롤

The DJI RC Pro is designed for intuitive operation, providing a seamless connection to your DJI drone. Familiarize yourself with the main controls:

• 전원 버튼: Located on the top right, used to turn the controller on and off.
• 홈으로 돌아가기(RTH) 버튼: Initiates the drone's return to its takeoff point.
• 비행 모드 스위치: Allows selection between different flight modes (e.g., Normal, Sport, Cine).
• Toggle Joystick: Used for navigating menus and adjusting various functions within the controller's interface.
• 녹음 버튼: 동영상 녹화를 시작하고 중지합니다.
• Camera Movement Toggles: Located on the back, these toggles allow for precise control over camera gimbal movements.

디스플레이 및 성능

The integrated display is a 5.5-inch, 1080p screen with 1000 nits of brightness, ensuring clear visibility even in bright outdoor conditions. The powerful processor within the controller ensures a smooth and stable connection with your aircraft, enhancing the overall flight experience. The O3+ video transmission technology supports an extended range of up to 15 kilometers between the controller and your drone.

Enhanced Portability and Security

The DJI RC Pro features convenient attachment points on the bottom, allowing for the use of a strap. This feature helps prevent accidental drops and provides added security during operation.

유지

To ensure the longevity and optimal performance of your DJI RC Pro Smart Controller, follow these general maintenance guidelines:

• 컨트롤러를 깨끗하게 유지하고 먼지와 이물질이 묻지 않도록 하십시오. 부드럽고 마른 천으로 닦아주세요.
• 컨트롤러는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 컨트롤러를 물이나 과도한 습기에 노출시키지 마십시오.
• Regularly check the control sticks and buttons for proper function and responsiveness.

문제 해결

If you encounter any issues with your DJI RC Pro Smart Controller, consider the following:

• 호환성: Always verify that your DJI RC Pro is compatible with your specific DJI aircraft model. The DJI RC Pro is compatible with DJI Air 2S and DJI Mavic 3 drones.
• 연결 문제: Ensure both the controller and the drone are fully charged and properly linked. Refer to the drone's manual for specific linking procedures.
• 화면 디스플레이: If the screen is dim or unresponsive, check the brightness settings and ensure the battery is adequately charged.
• 물리적 손상: If the controller has been dropped or sustained impact, inspect for physical damage, especially to antennas or control sticks.

For persistent issues, please refer to the official DJI support resources or contact RotorLogic customer service.

명세서

호환성

The DJI RC Pro Smart Controller is specifically designed for use with the DJI 에어 2S 그리고 DJI 매빅 3 drones. It is not compatible with other DJI drone models.

상자 안에 무엇이 들어있나요?

The standard package for the DJI RC Pro Smart Controller includes the following items:

• DJI RC Pro Controller x 1
• USB 3.0 Type-C Cable x 1

Please note: USB Charger and Retail Box are not included.

보증 및 지원

For information regarding warranty coverage and technical support for your DJI RC Pro Smart Controller, please refer to the official documentation provided by DJI or visit the RotorLogic store on Amazon. You may also contact RotorLogic customer service directly for assistance with product-related inquiries.