중요 안전 지침
경고: Failure to observe these instructions can cause product damage, explosion, fire, or electric shocks!
- 이 장치를 열거나 수리하지 마십시오.
- Do not expose the device to liquids, excessive heat, or extreme cold.
- 기기를 닦을 때는 부드럽고 마른 천만 사용하십시오.
- 장치와 모든 느슨한 부품을 어린이, 애완동물 및 권한이 없는 사람의 손이 닿지 않는 곳에 보관하십시오.
- Only use the device with appropriate provided accessories and cables.
- Do not use the cables in any way other than specified in this guide; avoid bending, cutting, extending, knotting, or stepping on them.
- Do not insert any foreign objects into the device openings.
- If the device is damaged or becomes excessively hot, discontinue use immediately.
- Exercise caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.
- For safety instructions in additional languages, please visit www.speedlink.com.
제품 끝view
The Speedlink RAIT Wireless Bluetooth Gamepad is designed for versatile gaming across multiple platforms, including Nintendo Switch, PC, and Android devices. It features a robust, ergonomic design with motion control capabilities for Nintendo Switch, precise input options, and a vibration function for enhanced immersion.
영상: 앞쪽 view of the Speedlink RAIT Wireless Bluetooth Gamepad, showcasing its ergonomic shape, dual analog sticks, D-pad, action buttons (A, B, X, Y), Home button, and +/- buttons.
The gamepad offers comprehensive control with 10 buttons, 2 triggers, a digital directional pad, and 2 analog sticks. Its rubberized surface ensures a non-slip grip, providing optimal control during intense gaming sessions. The built-in 600 mAh Li-ion battery guarantees extended playtime, and the included USB-C cable allows for convenient charging.
영상: 뒤쪽 view of the Speedlink RAIT Wireless Bluetooth Gamepad, highlighting the USB-C charging port and the L2/R2 triggers.
설정 및 연결
1. 닌텐도 스위치와의 페어링
- Nintendo Switch 콘솔을 켭니다.
- 홈 메뉴에서 컨트롤러, 그 다음에 그립/오더 변경.
- On the Speedlink RAIT Gamepad, press and hold the 홈 버튼 (center button with house icon) for approximately 3-5 seconds until the LEDs begin to flash rapidly.
- Once the gamepad is successfully paired, the corresponding player LED on the gamepad will remain solid.
2. Pairing with PC (Bluetooth)
- Ensure your PC has Bluetooth functionality enabled.
- Navigate to your PC's Bluetooth settings (e.g., 설정 > 기기 > Bluetooth 및 기타 기기).
- Put the gamepad into pairing mode by pressing and holding the 홈 버튼 LED가 빠르게 깜빡일 때까지.
- 선택하다 "Speedlink RAIT" from the list of available Bluetooth devices on your PC to complete the pairing process.
3. 안드로이드 기기와의 페어링
- Enable Bluetooth on your Android smartphone or tablet.
- 기기의 블루투스 설정으로 이동하세요.
- Put the gamepad into pairing mode by pressing and holding the 홈 버튼 LED가 빠르게 깜빡일 때까지.
- 선택하다 "Speedlink RAIT" from the list of available Bluetooth devices on your Android device to establish the connection.
영상: 각진 view of the Speedlink RAIT Wireless Bluetooth Gamepad, emphasizing its wireless Bluetooth connectivity and compatibility with Nintendo Switch, PC, and Android.
게임패드 작동
버튼 레이아웃 및 기능
| 단추 | 기능 |
|---|---|
| A, B, X, Y 버튼 | 게임 내 명령을 위한 표준 작업 버튼입니다. |
| D-패드(방향 패드) | Digital input for directional movement or menu navigation. |
| 좌/우 아날로그 스틱 | Analog input for precise movement and camera control. |
| L1/R1 (어깨 단추) | Top shoulder buttons for various in-game actions. |
| L2/R2 (Triggers) | Analog triggers for pressure-sensitive actions (e.g., acceleration, aiming). |
| 홈 버튼 | Returns to the system's home menu; also used for pairing. |
| + (플러스) 버튼 | 일반적으로 시작/일시정지 또는 메뉴 접근에 사용됩니다. |
| - (마이너스) 버튼 | Typically used for Select/View or menu access. |
| MODE 버튼 | Switches between different operating modes (if applicable, consult game/system for details). |
| RAPID Button | Activates/deactivates turbo (rapid fire) function for other buttons. |
Motion Control Sensor
The built-in motion control sensor is active when the gamepad is connected to a Nintendo Switch console. This feature allows you to control compatible games directly through the physical movements of the gamepad, enhancing the interactive gaming experience.
진동 기능
The gamepad features a vibration function that provides tactile feedback during gameplay. This intensifies the gaming experience by making critical in-game moments directly felt through the controller.
Rapid Fire (Turbo) Function
To activate the rapid fire function for a specific button, press and hold the RAPID 버튼, then press the desired action button (e.g., A, B, X, Y, L1, R1, L2, R2). The selected button will now continuously register input as long as it is held down. To deactivate rapid fire for that button, repeat the same process.
게임패드 충전
The Speedlink RAIT Gamepad is equipped with a 600 mAh Li-ion battery, providing extended gameplay hours. When the battery level is low, the gamepad's indicator light will signal this condition (e.g., blinking slowly).
- Locate the USB-C charging port on the top edge of the gamepad.
- Connect the included 1-meter USB-C charging cable to the gamepad's USB-C port.
- Connect the other end of the USB-C cable to a suitable USB power source, such as a PC's USB port, a USB wall adapter, or a power bank.
- During charging, the LED indicator on the gamepad will typically blink. Once fully charged, the LED indicator will usually turn solid or switch off, depending on the specific model's behavior.
- A full charge provides hours of uninterrupted gameplay. Disconnect the charging cable once the battery is full to prolong battery life.
유지 보수 및 관리
- 청소: Regularly clean the gamepad with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface and internal components.
- 저장: Store the gamepad in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid placing heavy objects on top of the gamepad.
- 손질: Avoid dropping the gamepad or subjecting it to strong impacts, which can cause internal damage.
- 배터리 관리 : For optimal battery longevity, avoid completely draining the battery frequently. If storing for an extended period, charge the battery to approximately 50% before storage.
문제 해결
게임패드가 연결/페어링되지 않음
- 게임패드가 충분히 충전되었는지 확인하세요.
- Verify that Bluetooth is enabled on your Nintendo Switch, PC, or Android device.
- Try re-pairing the gamepad by following the setup instructions for your specific device.
- Restart your host device (Switch, PC, or Android) and attempt pairing again.
- 다른 Bluetooth 장치가 연결을 방해하지 않는지 확인하세요.
Buttons or Analog Sticks Not Responding
- 게임패드가 기기에 제대로 연결되었는지 확인하세요.
- Ensure the gamepad battery is not critically low.
- Test the gamepad in another game or application to determine if the issue is game-specific.
- If possible, try updating the firmware of your host device (e.g., Nintendo Switch system software).
Vibration Function Not Working
- 플레이하는 게임이 진동 피드백을 지원하는지 확인하세요.
- Check the in-game settings or system settings to ensure vibration is enabled.
짧은 배터리 수명
- 게임패드를 사용하기 전에 완전히 충전되었는지 확인하십시오.
- 배터리 성능은 반복적인 충전 과정으로 인해 시간이 지남에 따라 자연스럽게 저하될 수 있습니다.
- Reduce vibration intensity in games if possible, as this can consume more power.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SL-330402-RRBK |
| 호환성 | Nintendo Switch, PC, Android |
| 연결성 | 블루투스 무선 |
| 배터리 유형 | 600 mAh Li-ion (Lithium Ion) |
| 충전 포트 | USB-C |
| 치수(폭 x 깊이 x 높이) | 147 x 105 x 67mm(5.79 x 4.13 x 2.64인치) |
| 무게 | 205 grams (7.23 ounces) / 12.3 ounces (product spec) |
| 통제 수단 | 10 buttons, 2 triggers, digital directional pad, 2 analog sticks |
| 특별 기능 | Motion control sensor (Nintendo Switch only), Vibration function, Rapid fire function |
보증 및 지원
For detailed warranty information, technical support, and frequently asked questions, please visit the official Speedlink website. You can find the most up-to-date resources and contact information there.
공식적인 Web대지: www.speedlink.com
적합성 고시
수입자/제조업체: ZEICHNER Media GmbH, Im Dorf 5, 27424 Hesedorf, Deutschland
제품 번호: SL-330402-RRBK
유형 설명 : RAIT Bluetooth Gamepad for Nintendo Switch, rubber-black
제품은 다음 지침을 준수합니다.
- 빨간색: 2014/53/EU
- RoHS: 2011/65/EU
적합성 선언, 최신 사용자 가이드, FAQ 또는 추가 정보를 보려면 다음을 방문하세요. www.speedlink.com.
RF 주파수 범위 : 2402MHz - 2480MHz
RF 전력 전송: < 8dBm
영상: Packaging of the Speedlink RAIT Gamepad, displaying regulatory marks, product details, and conformity notices.