WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer

소개

구매해주셔서 감사합니다asing the WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer. This versatile 2-in-1 tool is designed to simplify your garden maintenance tasks, offering both grass shearing and hedge trimming capabilities in a compact, lightweight, and cordless design. Please read this manual carefully before operation to ensure safe and efficient use of the product.

For optimal performance and longevity, adhere to all instructions regarding setup, operation, maintenance, and safety.

안전 정보

경고: Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and sturdy footwear when operating this tool. Keep hands and feet away from blades. Do not operate in wet conditions or near flammable liquids or gases.

• 공구를 작동하는 동안 어린이와 구경꾼이 접근하지 못하도록 하십시오.
• Ensure the safety lock key is properly inserted before operation.
• Do not force the tool. Use the correct blade for the task.
• Disconnect the tool from the power source before cleaning, maintenance, or changing accessories.
• 도구는 어린이의 손이 닿지 않는 건조하고 안전한 곳에 보관하세요.

제품 끝view 및 구성 요소

Familiarize yourself with the components of your WORKPRO Grass Shears and Hedge Trimmer:

그림 1: 제품 구성 요소

• 핸들: 편안한 그립감을 위해 인체공학적으로 디자인되었습니다.
• 안전 버튼: Must be pressed simultaneously with the switch to operate.
• 스위치: Activates the blades.
• 블레이드 릴리스 버튼: Used to detach blades for changing.
• 180° Rotation Button: Allows the handle to rotate for different cutting angles.
• Safety Lock Key: Must be inserted into the handle end for operation.
• 잔디 가위 블레이드: 80mm cutting width, ideal for lawn edges and small grass areas.
• 가지치기용 날: 120mm cutting width, suitable for hedges and shrubs.
• 마이크로 USB 케이블: For charging the tool's battery.

설정 및 블레이드 설치

Before first use, ensure the battery is fully charged (refer to the Charging section). Follow these steps to install the desired blade:

Figure 2: Setup Steps

1. 블레이드 부착: Align the chosen blade (grass shear or hedge trimmer) with the main unit and press firmly until it clicks into place. Ensure it is securely fastened.
2. Insert Safety Lock Key: Insert the safety lock key into the designated slot at the end of the handle. The tool will not operate without this key.

작동 지침

To operate your WORKPRO tool, follow these steps:

1. Activate Safety Button: With the safety lock key inserted, press and hold the safety button located on the side of the handle.
2. 참여 스위치: While holding the safety button, press the main power switch (trigger) to start the blades.
3. 연속 작업: Once the blades are running, you can release the safety button, and the tool will continue to operate as long as the main switch is pressed.
4. Adjust Handle Angle (Hedge Trimmer): For hedge trimming, you can rotate the handle 180 degrees by pressing the 180° rotation button and adjusting the handle to your desired angle. This allows for comfortable cutting in various positions.

Figure 3: Grass Shearing in Use

Figure 4: Hedge Trimming and Handle Rotation

Video: WORKPRO Grass Shears and Hedge Trimmer in Action

This video demonstrates the operation of the WORKPRO Grass Shears and Hedge Trimmer, including blade changes, safety features, and practical use for both grass and hedge trimming.

배터리 충전

The WORKPRO tool is powered by a 3.6V rechargeable Lithium-ion battery. It features a battery level indicator lamp to show the remaining charge.

Figure 5: Charging and Power Indicator

• 충전 표시기: 빨간색 표시등은 배터리가 충전 중임을 나타냅니다. 녹색 표시등은 배터리가 완전히 충전되었음을 나타냅니다.
• Connecting for Charge: Use the provided Micro USB cable. Connect it to the tool's charging port and plug the other end into a commercially available USB adapter (DC5V 0.5~1.0A output is recommended).
• 충전 시간: 완전 충전에는 약 1시간 30분에서 3.5시간 정도 소요됩니다.
• 중요 참고 사항: Ensure your USB adapter provides at least 5V/1A output. Insufficient output may prevent proper charging or trigger overvoltage protection, stopping the charging process.

유지

정기적인 유지관리는 도구의 수명과 최적의 성능을 보장합니다.

• 블레이드 청소: After each use, remove the blades and clean off any grass, leaves, or debris. Use a brush or cloth.
• 블레이드 윤활: Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation.
• 저장: Store the tool and blades in a dry, clean place. Ensure blades are clean and dry before storage.
• 배터리 관리 : Do not store the tool with a completely depleted battery. Charge it periodically if not used for extended periods to maintain battery health.

문제 해결

명세서

그림 6: 제품 치수 및 사양

보증 및 지원

WORKPRO products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official WORKPRO web대지.

보증 청구를 위해 구매 증명서를 보관하십시오.