1. 서론
Thank you for choosing the WORKPRO Cordless Grass Shear & Shrubbery Trimmer. This 2-in-1 versatile tool is designed for efficient and comfortable trimming of grass, hedges, and small branches in your garden. Its lightweight and cordless design ensures ease of use and maneuverability.
포함된 구성 요소:
- 메인 트리머 유닛
- Grass Shear Blade (3.5 inches wide)
- Shrubbery Trimmer Blade (5.5 inches long)
- USB Type-C 충전 케이블
- 보안 키
- 블레이드 커버
Figure 1: WORKPRO Cordless Grass Shear & Shrubbery Trimmer and accessories.
2. 중요 안전 지침
Always prioritize safety when operating power tools. Read and understand all instructions before use.
- 이중 안전 보호: The trimmer features a double lock design, including a child safety lock and a security key. Ensure the security key is inserted and the safety lock is engaged before operation.
- 블레이드 취급: Blades are sharp. Always handle them with care. Use the provided blade covers when storing the tool or changing blades.
- 블레이드 교체: Blades can be replaced quickly and safely without tools. Refer to the 'Blade Installation/Removal' section for detailed steps.
- 유지: After each use, clean the blades thoroughly and keep them dry during storage to ensure a longer lifespan.
- 충전 안전: Use only a 5V/1A charger (not included) with the provided USB Type-C cable. Do not attempt to charge with damaged cables or chargers.
- 일반적인 사용: Keep hands, face, and feet away from the blades. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
Figure 2: Engage the safety lock and ON/OFF switch simultaneously to operate.
3. 설정
3.1 배터리 충전
The WORKPRO trimmer is powered by a long-life 2000mAh lithium-ion battery. Before first use, fully charge the battery.
- Connect the provided USB Type-C cable to the charging port on the back of the trimmer.
- Plug the USB-A end of the cable into a 5V/1A USB charger (not included).
- The charger LED indicator will illuminate during charging.
- 완전 충전에는 약 2.5-3.5시간이 걸립니다.
- For optimal battery life, recharge the trimmer every 3-6 months if it is not used often.
Figure 3: Charging port and security key location.
3.2 블레이드 설치/제거
The 2-in-1 design allows for quick and easy switching between the grass shear and shrubbery trimmer blades.
- Ensure the trimmer is OFF and the security key is removed before changing blades.
- To remove a blade: Press the blade release button located on the top of the trimmer and gently pull the blade attachment away from the main unit.
- To install a blade: Align the new blade attachment with the main unit, ensuring the gear mechanism fits correctly. Push firmly until it clicks into place.
Figure 4: Steps for quick and safe blade change.
Video 1: Official WORKPRO guide on how to install and use the grass trimmer blades.
4. 사용 설명서
4.1 전원 켜기/끄기
- Ensure the security key is fully inserted into its slot at the back of the handle.
- Press and hold the safety lock button (located on the side of the main unit).
- While holding the safety lock, press the ON/OFF switch (trigger) to start the trimmer.
- Release the ON/OFF switch to turn the trimmer off.
4.2 잔디깎이 칼날 사용
Attach the 3.5-inch wide grass shear blade for precision trimming of grass edges and small areas your mower cannot reach.
- Ideal for trimming around flowerbeds, pathways, and fences.
- Provides approximately 60 minutes of operation on a full charge.
Figure 5: Trimming grass with the grass shear blade.
4.3 Using the Shrubbery Trimmer Blade
Attach the 5.5-inch long shrub shear blade for grooming hedges and pruning small branches.
- Suitable for branches less than 7.8mm in thickness.
- Provides approximately 45 minutes of operation on a full charge.
Figure 6: Trimming shrubs with the shrubbery trimmer blade.
4.4 Rotatable Handle Design
The handle can be adjusted 180° to provide a comfortable gripping posture when trimming the left or right side of hedges, reducing fatigue during extended use.
- To adjust the handle, locate the handle rotation button (usually near the base of the handle).
- Press the button and rotate the handle to your desired angle (0°, 90°, or 180°).
- 버튼을 놓아 핸들을 제자리에 고정합니다.
Figure 7: The 180° rotatable handle for ergonomic use.
5. 유지관리
적절한 유지관리는 트리머의 수명과 최적의 성능을 보장합니다.
- 블레이드 청소: After each use, especially when trimming sap-producing plants, clean the blades thoroughly. Use a damp cloth to wipe off debris, then dry completely.
- 저장: Store the trimmer in a dry place, away from direct sunlight and extreme temperatures. Always attach the blade covers before storage to prevent accidental injury and protect the blades.
- 배터리 관리 : If the trimmer is not used often, recharge the lithium-ion battery every 3-6 months to prolong its life.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 트리머가 켜지지 않습니다. | Security key not inserted correctly. Battery is not charged. Safety lock/switch not pressed simultaneously. | Ensure the security key is fully inserted. Charge the battery for 2.5-3.5 hours. Press the safety lock and ON/OFF switch at the same time. |
| 작동 시간이 짧습니다. | Battery not fully charged. Battery degradation due to infrequent use. | Ensure battery is fully charged before use. Recharge battery every 3-6 months if not used often. |
| 칼날이 효과적으로 절단되지 않습니다. | Blades are dirty or dull. Attempting to cut branches thicker than recommended. | Clean and dry blades after each use. Ensure branches are less than 7.8mm thick for the shrubbery blade. |
7. 사양
- 상표: 워크프로
- 모델: W125106AU
- 전원: 배터리 구동식 (7.2V 리튬 이온 배터리)
- 배터리 용량: 2000mAh
- 무부하 속도: 1100rpm
- Shrub Shear Blade Length: 5.5인치(14cm)
- 잔디깎이 날 너비: 3.5인치(9.7cm)
- Max Branch Thickness (Shrub): < 7.8mm
- 품목 무게: 1.1파운드(0.5kg)
- 제품 크기: 12.99인치 길이 x 3.82인치 너비 x 4.33인치 높이
- 재료: 플라스틱, 금속
- 충전 인터페이스: USB 타입-C
- 한국어: 820909773436
8. 보증 및 지원
For warranty information, product support, or to purchase replacement parts, please refer to the documentation included with your product or visit the official WORKPRO web대지.
전체 사용자 매뉴얼(PDF)에도 액세스할 수 있습니다. 여기.