1. 서론
The Easythreed K1 Mini 3D Printer is an entry-level 3D printer designed for beginners, including children and teens. It offers a compact design, ease of use, and reliable performance for creating three-dimensional models. This manual provides essential information for setting up, operating, and maintaining your 3D printer.
Figure 1.1: The Easythreed K1 Mini 3D Printer, showcasing its compact design and a printed vase on the build plate.
2. 상자 안에 무엇이 들어있나요?
Upon unboxing your Easythreed K1 Mini 3D Printer, please ensure all the following components are present:
- Easythreed K1 Mini 3D Printer Unit
- 전원 어댑터
- 사용 설명서 (본 문서)
- Test PLA Filament (small quantity)
- TF Card (includes assembly video, sample files, and software)
3. 설치 및 조립
The Easythreed K1 Mini 3D Printer is designed for quick and easy assembly, typically taking around 5 minutes. It consists of three main parts that need to be connected.
3.1 초기 조립
- 모든 포장재를 조심스럽게 제거하세요.
- Connect the main components as indicated in the assembly video provided on the TF card.
- 계속하기 전에 모든 연결이 안전한지 확인하세요.
3.2 필라멘트 로딩
The printer uses 1.75mm PLA or TPU filament. To load filament:
- Place the filament spool onto the designated holder.
- Gently feed the filament into the extruder's input hole until it catches.
- Use the 'Feed' button on the printer's control panel to automatically draw the filament into the nozzle. Wait until molten filament extrudes from the nozzle, indicating it's ready.
Figure 3.1: Key features including Dual Z Axis Design, Upgraded Extruder, Removable Magnetic Plate, and Easy Operating buttons.
4. 사용 설명서
Operating the Easythreed K1 is straightforward with its intuitive controls.
4.1 밭고랑 평탄화 (매우 중요한 단계)
Proper bed leveling is the most critical step for successful prints.
- Press the 'Home' button on the control panel. The print head will automatically move to its home (zero) position.
- Once the nozzle touches the magnetic plate, immediately disconnect the power. This prevents the nozzle from pressing too hard.
- Adjust the distance between the nozzle and the magnetic plate at four points (A, B, C, D) on the build platform. The correct distance should be approximately the thickness of a single piece of paper.
- If the nozzle is too close, it can damage the magnetic plate. If it's too far, the print will not adhere.
Figure 4.1: Visual guide for the bed leveling process, showing correct and incorrect nozzle distances.
4.2 Printing Your First Model
- Ensure the TF card with your desired model file is inserted into the printer's TF card slot. The printer will print the latest model file if multiple are present.
- Press the 'Start Printing' button. The printer will begin heating the nozzle and then commence printing.
- 빌드 플레이트에 제대로 접착되었는지 확인하기 위해 초기 레이어를 모니터링합니다.
- Once printing is complete, wait for the print to cool down before carefully removing it from the removable magnetic plate. The flexible plate makes removal easy.
그림 4.2: 예amples of various models that can be printed with the Easythreed K1 Mini 3D Printer.
4.3 Software and Slicing
The printer comes with its own design and slicing software on the supplied TF card. For more advanced users, Ultimaker Cura is recommended, and a profile file for import is provided.
그림 4.3: 이상view of modeling software for advanced users, slicing software for intermediate users, and massive printable models for beginners.
5. 유지관리
정기적인 유지보수는 3D 프린터의 수명과 최적의 성능을 보장합니다.
- 노즐 청소: Periodically clean any filament residue from the nozzle using a soft brush or cloth.
- 빌드 플레이트를 청소하세요: After each print, ensure the magnetic build plate is clean and free of debris.
- 나사를 조이세요: Due to vibrations during printing, screws may loosen over time. Periodically check and tighten all screws, especially on the frame and moving parts.
- 필라멘트를 올바르게 보관하세요: Store filament in a dry, cool place to prevent moisture absorption, which can affect print quality.
6. 문제 해결
다음은 몇 가지 일반적인 문제와 해결 방법입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인쇄물이 용지에 붙지 않음 | Improper bed leveling, dirty build plate, incorrect print settings (e.g., first layer height) | Re-level the bed carefully (refer to Section 4.1), clean the build plate, adjust first layer settings in slicing software. |
| 필라멘트 압출 없음 | Nozzle clogged, filament tangled, incorrect temperature | Clear nozzle clog, untangle filament, ensure correct printing temperature for PLA (typically 180-210°C). |
| Poor print quality (layers separating, rough surface) | Incorrect temperature, print speed too high, filament quality, loose components | Adjust temperature, reduce print speed, try new filament, check and tighten screws. |
| 프린터에서 이상한 소리가 납니다 | Loose screws, worn bearings, fan issues | Check and tighten all screws, inspect moving parts for obstruction or wear. |
7. 사양
Detailed technical specifications for the Easythreed K1 Mini 3D Printer:
- 제품 크기: 25D x 26.5W x 28H 센티미터
- 품목 무게: 1.4 킬로그램
- Building Size (Print Volume): 100 x 100 x 100mm(4인치 x 4인치 x 4인치)
- 필라멘트 호환성: 1.75mm PLA, TPU
- 인쇄 정확도: 0.1mm
- 노즐 직경: 0.4mm
- Extruder Heating Time: 3분 만에 180°C에 도달합니다.
- 빌드 플레이트: Removable Magnetic Plate
- 전력 소비(온모드): 30 와트
- 색상: 빨간색, 검은색
Figure 7.1: Dimensions of the Easythreed K1 Mini 3D Printer.
8. 보증 및 지원
Easythreed is committed to providing excellent pre-sales and after-sales service. If you encounter any quality problems with the product, including damage to parts during use, or damage due to transportation, we will replace the affected parts or the entire product free of charge.
Should you experience difficulties with leveling or achieving successful prints, please do not hesitate to contact our support team. We are dedicated to resolving your issues as quickly as possible.
For support, please refer to the contact information provided on the Easythreed official web사이트나 제품에 포함된 설명서를 참조하세요.
