소개 및 이상view
The Memphis Audio 16-MXA2.140 Powersports 2-Channel Amplifier is engineered for durability and performance in challenging environments. This amplifier features a robust design with conformal circuit boards, sealed controls, and upgraded terminals, making it suitable for powersports applications where exposure to elements is common. Its ultra-compact size allows for flexible installation in vehicles with limited space, such as UTVs or motorcycles.
This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio amp리퍼.
Image: The Memphis Audio 16-MXA2.140 Powersports 2-Channel Amp리파이어, 쇼크asing its compact design and integrated wiring harnesses.
주요 특징
- Ultra-compact design for versatile installation.
- Element-resistant conformal coat board for protection against moisture and dust.
- Sealed wire harnesses to prevent water ingress.
- Efficient Class D design for cool operation and high power output.
- Waterproof control covers for enhanced durability.
- Bass level control for audio customization.
- High and low level inputs for compatibility with various audio sources.
설정 및 설치
최적의 성능과 긴 수명을 위해서는 올바른 설치가 매우 중요합니다. amplifier. It is recommended to have this unit installed by a professional if you are unfamiliar with car audio wiring.
- 장착 위치: Select a secure, dry, and well-ventilated location for the amplifier. The unit is designed for surface mounting. Ensure the location is protected from direct exposure to extreme heat or physical damage.
- 전원 배선: Connect the main power wire (typically red) from the amplifier to the positive terminal of your vehicle's battery. An inline fuse (not included) should be installed within 18 inches of the battery. The recommended amplifier kit is a 10-gauge kit.
- 접지 배선: Connect the ground wire (typically black) from the amplifier to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid electrical connection.
- 원격 켜기: Connect the remote turn-on wire (typically blue) from the amplifier to the remote output of your head unit or an ignition-switched 12V source.
- 오디오 입력:
- 저수준 입력(RCA): If your head unit has RCA outputs, connect them to the amp앰프의 저레벨 입력.
- 고레벨 입력(스피커 레벨): If your head unit does not have RCA outputs, use the provided sealed wire harnesses to connect directly to your head unit's speaker outputs.
- 스피커 출력: 스피커를 연결하십시오 amplifier's speaker output terminals using appropriate gauge speaker wire. Ensure correct polarity.
All wire harnesses are sealed to protect against environmental elements. Ensure all connections are secure and properly insulated.
작동 지침
일단 amplifier is correctly installed and all connections are verified, you can begin operation.
- 전원 켜기: 차량의 점화 장치와 헤드 유닛을 켜십시오. amp앰프는 원격 전원 켜짐선을 통해 자동으로 전원이 켜져야 합니다.
- 이득 조정: Carefully adjust the gain control on the amplifier. Start with the gain at its minimum setting and slowly increase it until the desired volume is achieved without distortion. Avoid setting the gain too high, as this can lead to distorted sound and potential damage to speakers.
- Bass Level Control: Use the bass level control to adjust the low-frequency output to your preference. This control allows for fine-tuning of bass response.
- Crossover Settings (if applicable): 만약 당신의 amplifier includes crossover settings, adjust them according to your speaker type and desired sound profile. Refer to your speaker's specifications for recommended crossover points.
Always ensure your audio source (head unit) volume is at a moderate level before making adjustments on the amp리퍼.
유지
The Memphis Audio 16-MXA2.140 amplifier is designed for minimal maintenance due to its element-resistant construction. However, periodic checks can ensure continued optimal performance.
- 청소: 주기적으로 닦아주세요 amp부드러운 d가 있는 lifier의 외관amp 먼지와 이물질을 제거하는 천. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 연결 확인: Annually, inspect all wiring connections (power, ground, remote, input, output) to ensure they remain secure and free from corrosion.
- 환경 보호: While element-resistant, avoid prolonged submersion or direct high-pressure water spray. Ensure waterproof control covers are properly seated.
문제 해결
문제가 발생하는 경우 amplifier의 경우 다음의 일반적인 문제 해결 단계를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음 / Amplifier가 켜지지 않습니다 |
|
|
| 소리가 출력되지 않음 |
|
|
| 왜곡된 소리 |
|
|
If these steps do not resolve the issue, contact customer support or a qualified technician.
명세서
| 사양 | 값 |
|---|---|
| 모델 번호 | RE-MXA2.140 |
| RMS 전력 @ 4Ω | 100와트 x 2채널 |
| RMS 전력 @ 2Ω | 140와트 x 2채널 |
| Bridged/Mono Power @ 4Ω | 280와트 x 1채널 |
| THD% @ 4Ω | <1% |
| 주파수 응답 | 20Hz - 20kHz |
| 치수(길이 x 너비 x 높이) | 5.91 x 4 x 1.75 인치 |
| 입력 범위 | 200mV - 9.1V |
| 추천 Amp 전부 | 10GKIT (10 Gauge) |
| 권tage | 9.1볼트(작동 전압) |
| 장착 유형 | 표면 실장 |
보증 및 지원
This product is listed as "Renewed." Warranty coverage for renewed products can vary. Please refer to the specific warranty terms provided by the seller or the Amazon Renewed program at the time of purchase.
For technical support or further assistance, please contact Memphis Audio customer service or the retailer from whom the product was purchased. Keep your purchase receipt and model number (RE-MXA2.140) readily available when seeking support.
