XUNVC191 링크

LiNKFOR 디지털 오디오 스플리터 SPDIF/Toslink 1x3 사용 설명서

모델: XUNVC191

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3. This device allows you to split a single digital optical audio source to three output devices simultaneously, enhancing your audio setup flexibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

  • 1x LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3
  • 1x Optical Cable (1 meter)
  • 1x USB 전원 케이블
  • 1x 사용자 설명서
Package contents including the splitter, optical cable, USB cable, and manual
Figure 1: Contents of the LiNKFOR Digital Audio Splitter package. Shown are the splitter unit, a 1-meter optical cable, a USB power cable, and the user manual.

제품 특징

  • 1x3 Optical Audio Splitter: Divides one digital optical Toslink source to three output devices.
  • 지원되는 오디오 형식: Compatible with LPCM2.0, DTS, and Dolby-AC3. Note: Does not support 7.1CH Dolby Digital Plus / Dolby TrueHD.
  • Lossless & Long-Distance Transmission: Supports signal transmission up to 25 meters (82 feet) with minimal signal loss (<0.2dB/m) via fiber optic cable.
  • 간섭 방지 설계: 알루미늄 합금 casing ensures good anti-interference performance and heat dissipation.
  • LED 표시등: Provides clear operational status.
  • 오버볼tage 보호: Prevents damage to the splitter.
  • 폭넓은 호환성: Works with PS3, STB, Xbox, DVD players, Blu-ray players, HDTVs, and power amp정수기.

제품 끝view

Familiarize yourself with the ports and indicators on your LiNKFOR Digital Audio Splitter.

Diagram of the LiNKFOR Digital Audio Splitter showing Micro USB power input, DC 5V input, Toslink IN port, LED indicator, and three Toslink OUT ports (OUT1, OUT2, OUT3).
Figure 2: Front and rear panel view of the splitter, highlighting the Micro USB power input, DC 5V power input, Toslink input, LED status indicator, and three Toslink output ports.
  • Micro USB / DC 5V: 전원 입력 포트.
  • 주도의: Power/Status indicator.
  • 안에: Toslink optical audio input port.
  • OUT1, OUT2, OUT3: Toslink optical audio output ports.

설치 지침

Follow these steps to connect your LiNKFOR Digital Audio Splitter:

  1. 소스를 연결하십시오: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, Xbox, Blu-ray player) to the IN 스플리터의 포트.
  2. 출력 장치 연결: Use up to three Toslink optical cables to connect your audio receiving devices (e.g., soundbar, amplifier, headphones with optical input, Bluetooth optical transmitter, DAC audio converter) to the OUT1, OUT2, 그리고 OUT3 ports on the splitter.
  3. 전원 켜기: Connect the provided USB power cable to the 직류 5V or 마이크로 USB port on the splitter and then to a 5V USB power adapter (not included) or a USB port on your source device. The LED indicator will illuminate when power is supplied.
  4. 연결 확인: Ensure all cables are securely connected. Power on all connected devices.
Setup diagram showing a TV connected to the splitter, which then connects to a soundbar and a Bluetooth optical transmitter for headphones.
그림 3: 예ample setup demonstrating how to connect a TV to the splitter, and then distribute the audio signal to a soundbar and a Bluetooth optical transmitter for wireless headphones.
Diagram illustrating the splitter's ability to support three types of output devices: a soundbar/digital amplifier, an optical Bluetooth transmitter, and a DAC audio converter.
Figure 4: The splitter supports simultaneous output to three different types of audio devices, such as a soundbar, a Bluetooth optical transmitter for headphones, and a Digital-to-Analog Converter (DAC).

작동 지침

Once the splitter is set up, operation is straightforward:

  • Ensure all devices (source, splitter, and output devices) are powered on.
  • The splitter will automatically distribute the digital optical audio signal from the input source to all three connected output devices.
  • Adjust the volume on your individual output devices as needed.
  • The LED indicator on the splitter will remain lit, indicating proper power supply and operation.
운영 view of the splitter connected to a TV, soundbar, and a headphone charging dock with optical input.
Figure 5: The splitter in operation, allowing audio from the TV to be simultaneously played through a soundbar and a pair of headphones connected via an optical input dock.

유지

To ensure the longevity and optimal performance of your LiNKFOR Digital Audio Splitter, follow these maintenance guidelines:

  • 기기를 서늘하고 건조한 곳에 보관하고 직사광선, 열원 및 습기를 피하십시오.
  • 부드럽고 마른 천으로 기기를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
  • Avoid placing heavy objects on top of the splitter.
  • 기기를 직접 열거나 수리하려고 하지 마십시오. 수리가 필요한 경우 자격을 갖춘 서비스 담당자에게 문의하십시오.
  • 장시간 사용하지 않을 경우에는 전원 어댑터를 분리해 두세요.

문제 해결

If you encounter issues with your splitter, please refer to the following common problems and solutions:

문제가능한 원인해결책
No audio output from any device.
  • No power to the splitter.
  • 케이블 연결이 잘못되었습니다.
  • Source device not outputting optical audio.
  • Output device not configured correctly.
  • Ensure the USB power cable is connected and the LED is lit.
  • Check all Toslink cables are securely connected to the correct IN/OUT ports.
  • Verify your source device (TV, console) is set to output audio via Toslink/Optical.
  • Ensure your output devices (soundbar, amplifier) are set to receive audio from their optical input.
Audio output from some devices, but not others.
  • Faulty optical cable to specific output.
  • Output device not configured correctly.
  • Test the optical cable with another port or replace it.
  • Check the settings of the non-working output device.
Distorted or intermittent audio.
  • Damaged optical cable.
  • Unsupported audio format.
  • 연결이 느슨함.
  • 광 케이블을 교체하십시오.
  • Ensure the audio format is LPCM2.0, DTS, or Dolby-AC3. 7.1CH Dolby Digital Plus / Dolby TrueHD are not supported.
  • Check all connections are firm.
LED 표시등이 꺼져 있습니다.
  • 전원 공급이 없습니다.
  • Faulty power cable or adapter.
  • Ensure the USB power cable is connected to a working 5V power source.
  • Try a different USB power cable or adapter.

명세서

특징세부 사항
모델 번호XUNVC191
입력1x Toslink Optical
산출3x Toslink Optical
지원되는 오디오 형식LPCM2.0, DTS, Dolby-AC3
최대 전송 거리25 meters / 82 feet (with optical cable loss <0.2dB/m)
전원 공급 장치DC 5V (via Micro USB)
치수(길이 x 너비 x 높이)61 x 57 x 16mm
무게140그램
하우징 소재알루미늄 합금
원산지중국
Image of the LiNKFOR Digital Audio Splitter held in a hand, illustrating its compact size and dimensions of 61x57x16mm.
Figure 6: The compact dimensions of the LiNKFOR Digital Audio Splitter, measuring 61 x 57 x 16 mm, made from aluminum alloy.

보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LiNKFOR web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.