Klein Tools 29601 Magnetic Power Strip User Manual

소개

The Klein Tools 29601 Magnetic Power Strip is a robust power solution designed for various work environments. It features multiple outlets, USB charging ports, surge protection, and versatile mounting options to enhance productivity and safety.

이미지: 앞면 view of the Klein Tools 29601 Magnetic Power Strip, highlighting 120V AC power outlets, USB-C PD capable port, USB-A ports, and the AC power on/off switch with LED work lights.

안전 정보

경고: 이 제품은 캘리포니아 주에서 암과 선천적 결함 또는 기타 생식적 피해를 유발하는 것으로 알려진 납을 포함한 화학 물질에 노출될 수 있습니다. 자세한 내용은 www.P65Warnings.ca.gov.

• Always ensure the power strip is properly grounded before use.
• Do not overload the power strip beyond its rated capacity (1875 watts, 15 amp에스).
• Avoid using in wet conditions or near water.
• 기기를 열거나 개조하지 마십시오. 수리는 자격을 갖춘 전문가에게 맡기십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

제품 특징

• 마그네틱 마운팅: Powerful magnets allow for easy attachment to metal job boxes, workbenches, and other magnetic surfaces.
• 통합 LED 조명: Compact LED lights illuminate dark work areas, helping to locate tools, batteries, and cords.
• Fast Charging USB Ports: Includes one 45W PD (Power Delivery) capable USB-C port and two USB-A ports for convenient charging of various personal devices, including phones, tablets, and laptops.
• 서지 보호: Built-in surge protection with an LED indicator safeguards connected equipment from electrical spikes.
• 내구성 있는 전원 코드: Features a 5-foot power cord with extended strain relief for increased durability and flexible placement.
• 다중 장착 옵션: In addition to magnetic mounting, built-in hanging holes and recessed keyed holes allow for fixed mounting on non-magnetic surfaces.
• 4개의 AC 콘센트: Provides four 120V AC outlets for standard power needs.

이미지: 상세 view of the power strip's charging capabilities, showing one USB-C (45W PD) port, two USB-A (5V 2.4A) ports, and the integrated hang holes for versatile mounting.

설정 및 설치

The Klein Tools 29601 Power Strip offers several installation methods:

1. 마그네틱 마운팅:

   Simply attach the power strip to any metal job box, workbench, or other magnetic surface. The powerful magnets will hold it securely in place.

   

   Image: The rear of the power strip, illustrating the strong magnets for metal surface attachment and the keyhole slots for screw mounting.

   

   Image: The power strip is shown magnetically attached to the inside of a metal job box, providing power and light.

2. Screw Mounting (Non-Magnetic Surfaces):

   For non-magnetic surfaces, use the built-in hanging holes or recessed keyed holes. Mark the desired mounting points, drill pilot holes if necessary, and secure the power strip with appropriate screws (not included).

   

   Image: The power strip is securely mounted to a wooden wall using its integrated mounting holes, demonstrating fixed installation.

Once mounted, plug the power strip's 5-foot cord into a grounded 120V AC outlet.

작동 지침

1. 전원 켜기/끄기: Use the red rocker switch labeled "OFF" and "RESET" to control power to the AC outlets and USB ports. Flip the switch to the "ON" position to supply power.
2. 서지 보호 표시기: A dedicated LED indicator will illuminate when surge protection is active, confirming your devices are protected.
3. 재설정 버튼: In case of an overload, the power strip's circuit breaker may trip, cutting power. Press the "RESET" button to restore power after reducing the load.
4. AC 콘센트 사용: Plug your 120V AC devices into the four available outlets.
5. USB 포트 사용: Connect your USB-A or USB-C compatible devices to the respective ports for charging. The USB-C port supports 45W Power Delivery for faster charging of compatible devices.
6. LED 작업 조명: The integrated LED lights can be activated to provide illumination in dark areas. Refer to the product's specific controls for light activation (typically a button or sensor).

유지

• Keep the power strip clean and free from dust and debris. Use a dry cloth for cleaning.
• Regularly inspect the power cord for any signs of damage, fraying, or cuts. Discontinue use if damage is found.
• 모든 플러그가 콘센트에 완전히 꽂혀 있는지 확인하세요.
• 제품을 극한 온도나 장시간 직사광선에 노출시키지 마십시오.

문제 해결

• 콘센트/USB 포트에 전원이 공급되지 않습니다:
  • Check if the power strip's ON/OFF switch is in the "ON" position.
  • Press the "RESET" button to ensure the circuit breaker has not tripped due to an overload.
  • Verify that the main wall outlet is functioning correctly by plugging in another device.
• 서지 보호 표시등 꺼짐:
  • If the surge protection indicator light is off, it may indicate that the surge protection components have been compromised or have reached their end of life. The power strip may still provide power, but without surge protection. Consider replacing the unit.

명세서

Image: Visual representation of the power strip's dimensions: 5.8 inches height, 1.85 inches depth, and 4.7 inches width.

보증 및 지원

This Klein Tools product is covered by the manufacturer's warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the official Klein Tools web사이트를 방문하거나 고객 서비스에 직접 문의하세요.

For additional information or assistance, visit the KLEIN TOOLS Store on Amazon.