Transformers Studio Series 88 Deluxe Class Sideways Action Figure Instruction Manual

소개

This instruction manual provides detailed guidance for the assembly, transformation, operation, and care of your Transformers Studio Series 88 Deluxe Class Sideways action figure. This figure, inspired by Transformers: Revenge of the Fallen, converts between a robot and a sports car mode. Please read all instructions carefully before use to ensure proper handling and to maximize your enjoyment of this collectible figure.

안전 정보

WARNING: Small parts may be generated. Not for children under 3 years. Choking Hazard.

• 어린이가 질식하는 것을 방지하기 위해 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하십시오.
• Adult supervision is recommended for children aged 8 and up during initial transformation.
• 변형 과정에서 과도한 힘을 가하지 마십시오. 피규어가 손상될 수 있습니다.

패키지 내용

패키지에는 다음 항목이 포함되어 있어야 합니다.

• 1 x Sideways Action Figure (Model F3472)
• 1 x Blaster Accessory
• 1 x Removable Backdrop Display

Image: Front packaging of the Sideways figure, displaying the figure in robot mode and the Studio Series 88 branding.

설정 및 변환

The Sideways figure converts between robot mode and sports car mode in 20 steps. Refer to the visual guide on the back of the packaging for detailed steps. A general overview 아래에 제공됩니다.

로봇 모드

Image: Sideways figure in its robot form, showcasing articulation and design.

In robot mode, the figure is highly articulated, allowing for various poses. The included blaster accessory can be held in the figure's hand.

Sports Car Mode

Image: Sideways figure transformed into its sports car mode, ready for display.

To transform Sideways into sports car mode, carefully follow the 20 steps outlined in the visual guide. Ensure all panels and joints are securely aligned to form the vehicle's complete structure.

Transformation Steps Overview (Refer to packaging for full details)

Image: Back packaging illustrating the 20-step transformation process and the removable backdrop feature.

1. 로봇 모드 상태의 피규어부터 시작하세요.
2. Carefully articulate the limbs and body panels according to the numbered steps.
3. Fold and collapse sections to form the compact vehicle chassis.
4. Ensure all tabs and slots are engaged for a secure vehicle mode.
5. Reverse the steps to transform back into robot mode.

If you encounter difficulty, gently retrace your steps. Do not force any parts, as this may cause damage.

그림 작동

포즈

The Sideways figure features multiple points of articulation in both robot and vehicle modes. Carefully adjust joints at the head, shoulders, elbows, hips, and knees to achieve desired poses. Some joints may be tighter initially; gentle movement will loosen them over time.

액세서리 사용

The included blaster accessory can be inserted into the figure's hand in robot mode. Ensure it is firmly seated to prevent it from falling out during play or display.

탈착식 배경

The figure comes with a removable backdrop inspired by the Shanghai Pursuit scene from Transformers: Revenge of the Fallen. This backdrop can be used to enhance display options for your figure. Simply remove it from the packaging and place your figure in front of it.

유지

청소

To clean your figure, use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials, as these can damage the paint and plastic.

저장

Store the figure in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to sunlight can cause discoloration. Keep the figure and its accessories in a secure location to prevent loss or damage.

문제 해결

• 변형의 어려움: If parts are stiff or not aligning, review the visual guide on the packaging. Ensure all previous steps are correctly completed. Do not apply excessive force.
• 느슨한 관절: Over time, some joints may become loose. This is common with articulated figures. For minor looseness, a small amount of clear nail polish or a similar friction-enhancing liquid can be applied to the joint and allowed to dry, but this should be done with caution and at your own risk.
• 액세서리가 맞지 않습니다: Ensure the blaster accessory is oriented correctly before attempting to insert it into the figure's hand.

명세서

보증 및 지원

This product is manufactured by Hasbro. For any manufacturing defects or issues not covered by normal wear and tear, please contact Hasbro customer support. Specific warranty details may vary by region and purchase location. Please retain your proof of purchase.

추가적인 도움이 필요하시거나 view additional product information, please visit the official Hasbro or Transformers web대지.

• 제조업체: 하스브로
• 공식 트랜스포머 Web대지: transformers.hasbro.com