Pipishell PIXSF2
피피셸 풀모션 TV 벽걸이 마운트 사용 설명서
Model: PIXSF2
소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasin관절형 암과 VESA 플레이트를 포함합니다.
안전 정보
본 제품을 부적절하게 설치하거나 사용할 경우 심각한 부상이나 손해가 발생할 수 있습니다. 다음 안전 지침을 준수하십시오.
- 설치 표면이 마운트와 TV의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- 제공된 모든 하드웨어를 사용하고 부품을 다른 것으로 교체하지 마십시오.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
패키지 내용
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| 요소 | 수량 |
|---|---|
| 벽판 조립체 | 1 |
| TV 브라켓 | 1 |
| 장착 하드웨어(나사, 앵커, 와셔) | 어울리는 |
| 사용 설명서 | 1 |
설정 및 설치
Follow these steps carefully for a secure installation:
- 호환성 확인: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- 장착 위치 찾기: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- 벽면 플레이트 장착: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- TV 브래킷을 부착하세요: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- 행 디스플레이: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
작동 지침
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- 받침: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal view잉 각도.
- 경사: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect view잉 각도.
- 확장 및 수축: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile 바라보다.
- 회전: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
유지
To ensure the longevity and proper function of your TV wall mount:
- 모든 나사와 연결부가 단단히 조여져 있고 안전한지 정기적으로 점검하십시오.
- 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 거치대에는 텔레비전 외에는 아무것도 걸지 마십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 거치대가 불안정하게 느껴집니다. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| 회전/기울기 조절에 어려움이 있습니다. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| TV 수평이 맞지 않습니다. | 벽면 고정판이 고르지 않게 설치되었습니다. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
명세서
- 모델: PIXSF2
- 상표: 피피쉘
- 재료: 합금강
- 색상: 검은색
- 호환 가능한 TV 크기: 13-26 인치
- 최대 부하 용량 : 33파운드(15kg)
- VESA 호환성: 75x75mm, 100x100mm
- 이동 유형: Swivel, Rotate, Tilt, Full Motion, Articulating
- 경사각: -15° ~ +5°
- 회전 각도: ±90°(최대, TV 크기에 따라 다름)
- 벽에서 확장: 2.9인치(수축 시)에서 10.6인치(확장 시)까지
- 제품 크기: 38.98 x 12.6 x 5.12 inches (mount only)
- 품목 무게: 1.39파운드
보증 및 지원
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell web대지.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- 이메일: support@pipishell.com
- Web대지: www.pipishell.com
You can also find additional resources and FAQs on our web대지.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.