Urmet 1098/858 IP 5M NVR Kit with 8-Channel 4K PoE Instruction Manual

1. 서론

This Urmet 1098/858 IP 5M NVR Kit is a comprehensive video surveillance system designed to protect your property and ensure the safety of its occupants. The kit includes an 8-channel 4K PoE Network Video Recorder (NVR) and two 5-megapixel IP bullet cameras, enabling real-time monitoring and recording.

Utilizing IP technology, this system offers enhanced flexibility and versatility compared to traditional surveillance setups. Cameras can be installed in various locations, and the system supports remote monitoring from compatible devices.

Key features include 4K video resolution, a 5-meter night vision range, autofocus (AF) functionality for clear imaging, and H.265 video compression for efficient data storage and transmission. The kit also provides essential accessories such as junction boxes for tidy installation and a privacy sign.

그림 1: Urmet 1098/858 IP 5M NVR Kit components. This image displays the main components of the surveillance kit, including the NVR unit and two bullet-style IP cameras.

2. 안전 정보

• 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
• 전원 공급 장치 볼륨을 확인하십시오.tage matches the specified requirements for the NVR.
• Do not expose the NVR or cameras to water, moisture, or extreme temperatures.
• Avoid placing the NVR in areas with poor ventilation.
• Use only Urmet-approved accessories and power adapters.
• Installation should be performed by qualified personnel, especially for outdoor wiring.
• 유지관리나 청소를 하기 전에 전원을 분리하세요.
• Observe local regulations regarding video surveillance and privacy.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

• 1x Urmet 1098/328P 4K 8-Channel H.265 PoE NVR
• 2x Urmet 1099/501A 5MP IP Bullet Cameras (2.7-13.5mm AF varifocal lens)
• 2x Urmet 3000/108 Small Size Junction Boxes
• 1x Urmet 3000/84 Privacy Sign
• NVR용 전원 어댑터 1개
• 1x USB 마우스
• 설치용 하드웨어(나사, 벽 플러그)
• 빠른 시작 가이드 (이 문서는 전체 설명서 역할을 합니다)

4. 설정

4.1 NVR 설치

1. 놓기: Choose a secure, well-ventilated location for the NVR, away from direct sunlight, heat sources, and moisture.
2. 모니터 연결: 모니터를 NVR의 HDMI 또는 VGA 출력 포트에 연결합니다.
3. 마우스 연결: 동봉된 USB 마우스를 NVR의 USB 포트에 연결하십시오.
4. 네트워크 연결 : Connect the NVR to your local network using an Ethernet cable. This is required for remote access and firmware updates.
5. 전원 켜기: Connect the power adapter to the NVR and then to a power outlet. The NVR will start automatically.

4.2 카메라 설치

1. 장착 위치: Select appropriate locations for the bullet cameras, considering the desired field of view and protection from environmental elements.
2. 설치: 제공된 장착 하드웨어를 사용하여 카메라를 벽이나 천장에 단단히 고정하십시오.
3. 배선: Connect each camera to one of the NVR's PoE (Power over Ethernet) ports using an Ethernet cable. The NVR will provide both power and data connectivity.
4. 전기 배선함: For outdoor installations, use the Urmet 3000/108 junction boxes to protect cable connections from weather and tampering. Mount the junction box first, then route the camera cable through it.
5. Adjusting Lens: The 1099/501A cameras feature a varifocal lens (2.7-13.5mm) with autofocus. After initial power-up, access the camera settings via the NVR interface to adjust the zoom and focus for optimal clarity.

4.3 NVR 초기 설정

1. 첫 번째 부팅: Upon first power-up, the NVR will guide you through an initial setup wizard.
2. 비밀번호 설정: Create a strong administrator password for the NVR. This is crucial for security.
3. 네트워크 설정: Configure network settings (DHCP or static IP). Ensure the NVR has internet access for remote view업데이트 및 개선 사항.
4. 날짜 및 시간: 날짜, 시간 및 시간대를 올바르게 설정하십시오.
5. 하드 드라이브 초기화: If a new hard drive is installed, the NVR will prompt you to initialize or format it for recording.
6. 카메라 감지: The NVR should automatically detect and add the connected PoE cameras. If not, refer to the troubleshooting section or manually add cameras via the NVR's camera management menu.

5. 운영

5.1 라이브 View

After setup, the NVR will display the live video feeds from all connected cameras on the monitor. You can switch between single-camera view, 멀티 카메라 그리드 view, and other display modes using the NVR's on-screen menu and mouse.

5.2 녹음

• 연속 녹화 : The NVR is configured for continuous recording by default, capturing footag24시간 연중무휴.
• 모션 감지 녹화: You can configure specific cameras to record only when motion is detected. This saves storage space and makes review잉푸tage more efficient. Set up motion detection zones and sensitivity in the NVR's recording settings.
• 예약 녹화 : Define specific time schedules for recording, combining continuous and motion-triggered modes as needed.

5.3 재생

다시view 기록된 footage:

1. From the NVR's main menu, select "Playback."
2. Choose the desired camera(s) and date.
3. Use the timeline to navigate through recorded events. You can fast-forward, rewind, and pause playback.
4. Export specific video clips to a USB drive if needed.

5.4 원격 모니터링

The Urmet NVR supports remote viewing via a mobile application or PC software. Refer to the specific Urmet software documentation for detailed instructions on setting up remote access, which typically involves:

• Downloading the official Urmet app/software.
• Registering an account.
• Adding the NVR to your account using its serial number or QR code.
• Ensuring the NVR has a stable internet connection.

5.5 시스템 설정

The NVR's main menu provides access to various system settings, including:

• 일반 설정: Date/time, language, display resolution.
• 네트워크 설정: IP address, port forwarding (if required for advanced setups).
• 사용자 관리: Create and manage user accounts with different access privileges.
• 스토리지 관리: Monitor hard drive status, configure overwrite settings.
• 이벤트 관리: Configure alarms, notifications (e.g., email alerts for motion detection).

6. 유지관리

6.1 청소

• 카메라: Periodically clean the camera lenses with a soft, dry cloth to remove dust, dirt, or water spots that may impair image quality. Do not use harsh chemicals.
• NVR: Keep the NVR unit free of dust. Use a soft brush or compressed air to clean ventilation openings to prevent overheating.

6.2 펌웨어 업데이트

Urmet may release firmware updates to improve system performance, add features, or address security vulnerabilities. It is recommended to check for and apply updates periodically:

1. Access the NVR's system settings and look for a "Firmware Update" or "System Upgrade" option.
2. Ensure the NVR has a stable internet connection during the update process.
3. Follow the on-screen instructions carefully. Do not power off the NVR during an update.

6.3 스토리지 관리

Regularly check the status of the hard drive(s) in the NVR via the storage management settings. Ensure there is sufficient space for recording, and verify that the overwrite function is enabled if you wish for older footage to be automatically deleted to make space for new recordings.

7. 문제 해결

8. 사양

9. 보증 및 지원

This Urmet product is covered by a standard manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Urmet customer support through their official web구매 시 제공된 사이트 또는 연락처 정보.