NVX XMICROLOC4 4채널 라인 출력 변환기 사용 설명서

소개

The NVX XMICROLOC4 is a 4-channel line output converter designed to seamlessly integrate aftermarket amplifiers with factory OEM (Original Equipment Manufacturer) stereo systems. This device allows you to add an amplifier to your vehicle's existing audio setup without replacing the factory head unit, providing enhanced sound quality and power for your car audio system.

주요 특징

High-Powered 4-Channel Output Converter: The NVX XMICROLOC4 is a 4-channel, 600W line output converter (150W per channel) designed to integrate aftermarket amplifiers with factory OEM stereos.
Premium Audio Performance: Equipped with a premium input circuit that corrects crossover distortion, this converter ensures clear, accurate signal conversion for optimal sound quality.
Adjustable Outputs for Custom Tuning: The 6:1 step-down ratio with individual adjustable outputs allows for precise control over the audio signal, enabling fine-tuning for balanced sound.
Built-in Remote Turn-On Trigger: A 12-volt output for amplifier remote turn-on is integrated, enabling easy amplifier activation whenever the stereo is powered on.
Compact & Easy Installation: The compact design allows for easy installation in tight spaces, making it a practical solution for adding an amplifier to a factory system.

제품 끝view

NVX XMICROLOC4 4-Channel Line Output Converter

그림 1: 주요제품 view of the NVX XMICROLOC4, showing the top panel with the NVX logo, gain adjustment screws, and the multi-color wiring harness extending from the unit.

맨 위 view of NVX XMICROLOC4 with gain adjustments

그림 2: 맨 위 view of the NVX XMICROLOC4, highlighting the four blue gain adjustment screws (labeled 'L' for left and 'R' for right channels) and the NVX branding.

옆 view of NVX XMICROLOC4 with RCA outputs

그림 3: 옆 view of the NVX XMICROLOC4, clearly showing the four RCA output jacks. Two red jacks indicate right channels, and two white jacks indicate left channels for amp리퍼 연결.

설치 가이드

안전 예방 조치

Always disconnect the vehicle's negative battery terminal before performing any electrical work to prevent short circuits and damage.
전기적 위험을 방지하기 위해 모든 연결 부분이 안전하고 적절하게 절연되어 있는지 확인하세요.
설치 단계에 대해 잘 모르는 경우 전문 자동차 오디오 설치자에게 문의하세요.

Mounting the XMICROLOC4

Choose a secure, dry location within the vehicle, such as under the dashboard, behind the stereo, or in the trunk. Ensure the location is away from direct heat sources and allows for adequate ventilation. The compact design of the XMICROLOC4 facilitates installation in tight spaces.

배선 연결

스피커 레벨 입력: Connect the speaker wires from your factory stereo's speaker outputs to the corresponding input terminals on the XMICROLOC4's wiring harness. Ensure correct polarity (positive to positive, negative to negative) for each channel (Front Left, Front Right, Rear Left, Rear Right). Refer to your vehicle's wiring diagram for speaker wire identification.
RCA 출력: Connect RCA cables from the XMICROLOC4's RCA output jacks to the input jacks of your aftermarket amplifier. Match the front outputs of the XMICROLOC4 to the front inputs of the amplifier, and the rear outputs to the rear inputs.
원격 켜기: Connect the blue 12-volt remote output wire from the XMICROLOC4's harness to the remote turn-on input terminal of your amplifier. This connection will automatically activate your amplifier when the factory stereo is turned on.
접지 연결: Connect the black ground wire from the XMICROLOC4's harness to a clean, unpainted metal surface on the vehicle chassis. A solid ground connection is crucial for optimal performance and to prevent noise.

작동 지침

이득 조정

The NVX XMICROLOC4 features individual adjustable outputs for each channel, allowing for precise control over the audio signal level. After completing the installation and reconnecting the vehicle's battery:

Turn on your factory stereo and aftermarket amp리퍼.
Set the volume on your factory stereo to approximately 75% of its maximum level.
Using a small flat-head screwdriver, slowly adjust the gain controls on the top of the XMICROLOC4 (labeled 'L' and 'R' for each channel pair). Start with the lowest gain setting and gradually increase it until the desired output level is achieved without any audible distortion.
The 6:1 step-down ratio helps manage signal levels effectively, ensuring a clean signal to your amp리파이어. 조정 amplifier's gain settings as needed after setting the XMICROLOC4's gains.

명세서

그림 4: Diagram illustrating the dimensions and key specifications of the NVX XMICROLOC4.

특징	사양
모델	XMICROLOC4
채널	4채널
파워 핸들링	600W (채널당 150W)
권tage	12 볼트
최소 공급량tage	12 볼트
Step-down Ratio	6시 1분
장착 유형	표면 실장
특별 기능	Premium Input Circuit, Individual Adjustable Outputs, 12-Volt Remote Turn-On Output

문제 해결

문제	가능한 원인	해결책
소리가 나지 않습니다 amp스피커/스피커	배선 연결이 잘못되었습니다 Amp리파이어 전원이 켜지지 않음 Factory stereo not producing sound 원격 켜기 신호 없음	Verify all speaker level input and RCA output connections. 확인하다 amp앰프 전원 및 접지 연결. Ensure factory stereo is functioning correctly. Confirm remote turn-on wire is connected and receiving signal.
왜곡되거나 불분명한 소리	Gain settings too high 접지 연결 불량 Incorrect speaker polarity	Reduce gain settings on the XMICROLOC4 and/or amp리퍼. Ensure a clean, secure ground connection for the XMICROLOC4 and amp리퍼. Verify correct speaker wire polarity for all inputs.
Amp리퍼가 켜지지 않습니다	Remote turn-on wire disconnected or faulty XMICROLOC4 not receiving speaker level input signal	Check the remote turn-on wire connection from the XMICROLOC4 to the amp리퍼. Verify that the factory stereo is on and sending speaker level signals to the XMICROLOC4.

유지

The NVX XMICROLOC4 is designed for reliable operation with minimal maintenance. To ensure its longevity and optimal performance:

먼지와 이물질이 제품에 닿지 않도록 하십시오. 부드럽고 마른 천으로 닦아주세요.
제품을 과도한 습기나 극한 온도에 노출시키지 마십시오.
배선 연결부가 안전하게 고정되어 있는지 주기적으로 점검하십시오.

보증 및 지원

For information regarding warranty coverage, technical support, or service inquiries, please refer to the official NVX website or contact NVX customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

NVX XMICROLOC4

소개