Magene H603 심박수 모니터 가슴 스트랩 사용 설명서

1. 서론

The Magene H603 is a high-performance heart rate monitor designed for fitness tracking. It utilizes an advanced ECG processing circuit and a self-learning algorithm to provide accurate real-time heart rate data, minimizing interference from movement and sweat. The H603 features a comfortable split chest strap design and offers broad compatibility with ANT+ and Bluetooth devices.

This manual provides detailed instructions for setting up, operating, and maintaining your Magene H603 Heart Rate Monitor.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Magene H603 Heart Rate Sensor (x1)
• Adjustable Elastic Chest Strap (x1)
• CR2032 Battery (x1, pre-installed in sensor)

Image: Components included in the Magene H603 package: heart rate sensor, adjustable elastic strap, and a CR2032 battery.

3. 설정

3.1 센서를 가슴 스트랩에 부착하기

1. Moisten the electrode areas on the back of the chest strap with water or electrode gel to ensure good contact with your skin.
2. Attach the heart rate sensor to the two snap fasteners on the chest strap. Ensure it is securely fastened.

Image: The Magene H603 heart rate sensor connected to the split chest strap, ready for wear.

3.2 심박수 모니터 착용

1. Place the chest strap around your chest, directly below your pectoral muscles.
2. 스트랩 길이를 조절하여 편안하면서도 꼭 맞는 착용감을 확보하십시오. 센서는 가슴 중앙에 위치해야 합니다.
3. Ensure the moistened electrodes are in firm contact with your skin.

Image: A user wearing the Magene H603 heart rate monitor chest strap comfortably during exercise.

4. 사용 설명서

4.1 Powering On and Status Indicator

The Magene H603 automatically powers on when it detects a heart rate signal. A red LED light on the sensor indicates that the monitor is active and ready for use.

Image: The LED indicator on the Magene H603 sensor, which glows red when the device is ready to transmit data.

4.2 Connecting to Devices (ANT+ & Bluetooth)

The H603 supports both ANT+ and Bluetooth 4.2 for stable data transmission. It can record two copies of data simultaneously: one via an ANT+ device and another via a Bluetooth application.

1. 블루투스 연결:
   • Ensure Bluetooth is enabled on your smartphone or compatible device.
   • Open your preferred fitness application (e.g., Zwift, Strava, Elite HRV).
   • 앱 내에서 센서 페어링 또는 장치 연결 설정으로 이동하세요.
   • Select "Magene H603" from the list of available devices to pair.
2. ANT+ 연결의 경우:
   • Ensure your ANT+ compatible device (e.g., Wahoo, Garmin cycling computer) is powered on.
   • Go to the sensor pairing menu on your ANT+ device.
   • The device should automatically detect the Magene H603. Select it to connect.

The H603 is compatible with a wide range of fitness devices and applications, including Wahoo, Zwift, Strava, and Elite HRV.

5. 유지관리

5.1 가슴 스트랩 청소

• 사용 후에는 센서를 가슴 스트랩에서 분리하십시오.
• Rinse the chest strap under running water.
• 끈은 걸어서 말리세요. 세탁기나 건조기 사용은 금지합니다.
• Avoid using strong detergents or chemicals, as they may damage the electrodes.

5.2 배터리 교체

The H603 uses a CR2032 coin cell battery. When the battery is low, the device's performance may be affected, or it may stop transmitting data.

1. Using a coin, twist the battery cover on the back of the sensor counter-clockwise to open it.
2. 기존 CR2032 배터리를 제거하세요.
3. 새 CR2032 배터리를 양극(+)이 위를 향하게 하여 삽입하세요.
4. Replace the battery cover and twist it clockwise to secure it. Ensure the O-ring seal is properly seated to maintain water resistance.

Image: Illustration of replacing the CR2032 battery in the Magene H603 heart rate sensor.

6. 문제 해결

7. 사양

Image: The Magene H603 sensor demonstrating its IP67 dustproof and waterproof capabilities.

8. 보증 및 지원

Magene H603 심박수 측정기는 다음과 같은 기능을 제공합니다. 2년 제조사 보증. This warranty covers defects in materials and workmanship under normal use. Please note that human-caused damage is not covered under this warranty.

For technical support, warranty claims, or further inquiries, please contact Magene customer service through their official web제품을 구매한 사이트 또는 소매업체.